Specifications
| Type | Description |
|---|---|
| Part Number | LM358ADR |
| Manufacturer | Texas Instruments |
| Product Type | Operational Amplifier |
| Category | Signal Chain |
| Package / Case | D (SOIC, 8), 4.9 mm x 6 mm |
| Number of amplifiers | 2; LM358ADR / LM358A family dual op amp |
| Supply voltage recommended | 3 to 30 V; LM358, LM358A; VS = V+ - V- |
| Supply voltage absolute maximum | ±16 V or 32 V; LM358, LM358A; VS = V+ - V- |
| Common-mode voltage recommended | V- to V+ - 2 V; recommended operating conditions |
| Operating ambient temperature recommended | 0 to 70 °C; LM358, LM358A |
| Operating ambient temperature absolute maximum | 0 to 70 °C; LM358, LM358A |
| Operating virtual-junction temperature | 150 °C; absolute maximum rating |
| Storage temperature | -65 to 150 °C; absolute maximum rating |
| Differential input voltage absolute maximum | -32 to 32 V; differential voltage at IN+ with respect to IN- |
| Input voltage absolute maximum | -0.3 to 32 V; either input |
| Output short-circuit duration | Unlimited; one amplifier shorted to ground at or below TA=25°C, VS <= 15 V |
| ESD HBM rating | ±500 V; LM358A; per ANSI/ESDA/JEDEC JS-001 |
| ESD CDM rating | ±1000 V; LM358A; per JEDEC JESD22-C101 |
| Input offset voltage maximum | ±3 mV; LM358A, TA=25°C |
| Input bias current | 15 nA typ / 100 nA max; LM358A family comparison |
| Gain bandwidth product | 0.7 MHz; LM358A family comparison |
| Supply current | 0.35 mA typ per channel; LM358A family comparison |
| Package pin count | 8 pins; D SOIC package top view |
| Pin 1 function | OUT1 |
| Pin 2 function | IN1- |
| Pin 3 function | IN1+ |
| Pin 4 function | V-; negative lowest supply or ground for single-supply operation |
| Pin 5 function | IN2+ |
| Pin 6 function | IN2- |
| Pin 7 function | OUT2 |
| Pin 8 function | V+; positive highest supply |
| Junction-to-ambient thermal resistance | 124.7 °C/W; D SOIC 8-pin package |
| Junction-to-case top thermal resistance | 66.9 °C/W; D SOIC 8-pin package |
| Junction-to-board thermal resistance | 67.9 °C/W; D SOIC 8-pin package |
| Junction-to-top characterization parameter | 19.2 °C/W; D SOIC 8-pin package |
| Junction-to-board characterization parameter | 67.2 °C/W; D SOIC 8-pin package |
| Datasheet Status | request_only |
Product Overview
LM358ADR is a Texas Instruments dual operational amplifier in the Signal_Chain category. The device belongs to the LM358A family and provides two amplifier channels in an 8-pin D SOIC package with a 4.9 mm x 6 mm body size.
For operation, the recommended supply voltage is 3 to 30 V, with absolute maximum supply ratings of ±16 V or 32 V. The recommended common-mode voltage range extends from V- to V+ - 2 V. The recommended operating ambient temperature range is 0 to 70°C, matching the listed absolute maximum ambient operating range.
Electrical parameters include ±3 mV maximum input offset voltage at TA = 25°C, 15 nA typical and 100 nA maximum input bias current, 0.7 MHz gain bandwidth product, and 0.35 mA typical supply current per channel. The package pinout provides OUT1, IN1-, IN1+, V-, IN2+, IN2-, OUT2, and V+ connections across pins 1 through 8.
Assembly and thermal review should account for the D SOIC thermal metrics, including 124.7°C/W junction-to-ambient resistance and 66.9°C/W junction-to-case top resistance.
Key Features
- Dual operational amplifier with two amplifier channels
- Recommended 3 to 30 V supply voltage range
- Absolute maximum supply rating of ±16 V or 32 V
- Common-mode range from V- to V+ - 2 V
- 0 to 70°C recommended ambient operating range
- ±3 mV maximum input offset voltage at 25°C
- 0.7 MHz gain bandwidth product
- 0.35 mA typical supply current per channel
- 8-pin D SOIC package, 4.9 mm x 6 mm
- Unlimited short-circuit duration under stated conditions
Typical Applications
- Dual op amp signal conditioning
- Single-supply amplifier circuits
- Common-mode limited analog inputs
- Low-bandwidth analog gain stages
- 8-pin SOIC signal-chain assemblies
- Temperature-limited ambient operation
Procurement Notes
When requesting a quote for LM358ADR, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For analog and signal-chain sourcing, supply voltage, bandwidth, accuracy, noise level, package, temperature grade, input/output configuration and qualification requirements should be verified before approval.
FAQ
How many amplifiers are integrated in LM358ADR?
LM358ADR is a dual operational amplifier from the LM358A family. The extracted datasheet facts specify two amplifier channels in the device.
What supply voltage range is recommended for LM358ADR?
For LM358 and LM358A devices, the recommended supply voltage range is 3 to 30 V, defined as VS = V+ - V-. The absolute maximum supply rating is ±16 V or 32 V.
What package and pin count does LM358ADR use?
LM358ADR uses the D SOIC 8-pin package with a 4.9 mm x 6 mm body size. The pinout includes OUT1, IN1-, IN1+, V-, IN2+, IN2-, OUT2, and V+.
What are the key small-signal parameters for LM358ADR?
Extracted LM358A family parameters include ±3 mV maximum input offset voltage at TA = 25°C, 15 nA typical and 100 nA maximum input bias current, 0.7 MHz gain bandwidth product, and 0.35 mA typical supply current per channel.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.