Specifications
| Type | Description |
|---|---|
| Part Number | LM358P |
| Manufacturer | Texas Instruments |
| Product Type | Operational Amplifier |
| Category | Signal Chain |
| Package / Case | P (PDIP, 8), 9.81 mm × 9.43 mm |
| Number of amplifiers | 2 |
| Supply voltage range | 3 to 30 V |
| Recommended supply voltage | 3 to 30 V |
| Absolute maximum supply voltage | ±16 V or 32 V |
| Input offset voltage maximum | ±7 mV |
| Gain bandwidth product | 0.7 MHz |
| Supply current per channel | 0.35 mA typ |
| Input bias current | 20 nA typ, 250 nA max |
| Common-mode input voltage range | V− to V+ − 2 V |
| Common-mode input range includes ground | Yes |
| Operating ambient temperature | 0 to 70 °C |
| Absolute maximum operating ambient temperature | 0 to 70 °C |
| Operating virtual-junction temperature | 150 °C max |
| Storage temperature | −65 to 150 °C |
| Differential input voltage | −32 to 32 V |
| Input voltage range | −0.3 to 32 V |
| Output short-circuit duration to ground | Unlimited |
| ESD rating, HBM | ±500 V |
| ESD rating, CDM | ±1000 V |
| Junction-to-ambient thermal resistance | 80.9 °C/W |
| Junction-to-case top thermal resistance | 70.4 °C/W |
| Junction-to-board thermal resistance | 57.4 °C/W |
| Junction-to-top characterization parameter | 40 °C/W |
| Junction-to-board characterization parameter | 56.9 °C/W |
| OUT1 pin | Pin 1 |
| IN1− pin | Pin 2 |
| IN1+ pin | Pin 3 |
| V− pin | Pin 4 |
| IN2+ pin | Pin 5 |
| IN2− pin | Pin 6 |
| OUT2 pin | Pin 7 |
| V+ pin | Pin 8 |
| Datasheet Status | request_only |
Product Overview
The LM358P is a Texas Instruments dual operational amplifier in the Signal_Chain category. It provides two amplifiers in one P-package 8-pin PDIP body with a 9.81 mm × 9.43 mm package outline. The device is specified for a recommended supply range of 3 to 30 V, while the absolute maximum supply voltage is ±16 V or 32 V.
Key Features
- Dual operational amplifier with two amplifier channels
- Recommended supply voltage range from 3 to 30 V
- Absolute maximum supply rating of ±16 V or 32 V
- 0.7 MHz gain bandwidth product
- 0.35 mA typical supply current per channel
- 20 nA typical and 250 nA maximum input bias current
- Common-mode input voltage range from V− to V+ − 2 V
- Common-mode input range includes ground for single-supply operation
- Operating ambient temperature range from 0 to 70 °C
- 8-pin PDIP P package with defined dual-amplifier pinout
Typical Applications
- Single-supply signal conditioning
- Ground-referenced input sensing
- Dual-channel analog amplification
- Low-frequency analog gain stages
- PDIP through-hole circuit assemblies
- General Signal_Chain amplifier circuits
Procurement Notes
When requesting a quote for LM358P, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For analog and signal-chain sourcing, supply voltage, bandwidth, accuracy, noise level, package, temperature grade, input/output configuration and qualification requirements should be verified before approval.
FAQ
How many amplifiers are integrated in the LM358P?
The LM358P is a dual operational amplifier, so it integrates two amplifier channels in one 8-pin PDIP package.
What supply voltage range is recommended for LM358P?
The recommended supply voltage range for the LM358P is 3 to 30 V, with VS defined as V+ minus V−.
Does the LM358P common-mode input range include ground?
Yes. The extracted datasheet facts specify that the common-mode input range includes ground for single-supply operation, with a recommended common-mode range from V− to V+ − 2 V.
What package is used by the LM358P?
The LM358P uses the P package, an 8-pin PDIP case with a 9.81 mm × 9.43 mm package size.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.