Specifications
| Type | Description |
|---|---|
| Part Number | LTE-C1506 |
| Manufacturer | Texas Instruments |
| Product Type | Operational Amplifier |
| Category | Signal Chain |
| Package / Case | |
| Instrument Model | RTD 710A |
| Instrument Type | Digitizer |
| Manual Part Number | 070-7206-00 |
| Product Group | 45 |
| Manual Volume | Service Volume II |
| First Printing Date | January 1989 |
| Manufacturer Shown in Document | Tektronix, Inc. |
| Documentation Set Includes Instruction Manual | 070-7204-XX Instruction Manual |
| Documentation Set Includes Service Manual Volume 1 | 070-7205-XX Service Manual, Volume 1 |
| Documentation Set Includes Service Manual Volume 2 | 070-7206-XX Service Manual, Volume 2 |
| Documentation Set Includes Instrument Interfacing Guide | 070-7207-XX Instrument Interfacing Guide |
| Documentation Set Includes Rackmount Kit Instructions | 070-7208-XX Rackmount Kit for RTD 710/RTD710A |
| Computer Interface Documentation | IEEE 488 command set and programming examples included in instruction manual |
| Optional Service Documentation | Two-volume Service Manual for troubleshooting, repair, and calibration |
| Acquisition Modules | Input amplifier, A/D converter, envelope, waveform memory, average, trigger generator, time base, 200 MHz oscillator, address generator |
| Processing and Communication Modules | Display controller, keyboard, 68000 MPU, RAM, ROM, DMA controller, GPIB controller, power supply |
| Input Channels | Channel 1 and Channel 2 attenuators and amplifiers |
| Trigger Option | TV Trigger Circuit, Option 05 |
| A/D Converter Architecture | Track/hold and first A/D converter plus second A/D converter, buffer, and power supply |
| First A/D Converter Resolution | 5-bit A/D converter and latch |
| A/D Feedback DAC Resolution | 5-bit D/A converter |
| Second A/D Converter Feature | Second 5-bit A/D converter with error detector |
| Local A/D Power Supply | 2.8 V |
| Clock Oscillator Frequency | 200 MHz oscillator |
| Timing Oscillator Frequency | 10 kHz oscillator |
| DMA Controller Device | 68450 DMAC |
| Non-volatile Memory Support | Non-volatile memory with +4.5 V watch, write protect, switch, and battery check circuits |
| Memory Subsystem | Waveform memory, memory storage latch, memory MPU interface, memory write control, and average memory |
| Trigger Subsystem | Trigger source select, coupling select, slope select, trigger level, trigger readback, and TV trigger setup/readback |
| Sampling Clock Modes | High-speed mode sample clock generator and normal mode sample clock generator |
| Datasheet Status | request_only |
Product Overview
The documented architecture includes acquisition modules for the input amplifier, A/D converter, envelope, waveform memory, average function, trigger generator, time base, 200 MHz oscillator, and address generator. The processing and communication sections include a display controller, keyboard, 68000 MPU, RAM, ROM, DMA controller, GPIB controller, and power supply.
Signal acquisition details include Channel 1 and Channel 2 attenuators and amplifiers, a track/hold and first A/D converter, a second A/D converter, buffer, and local power supply. The extracted facts specify a 5-bit first A/D converter and latch, a 5-bit D/A converter, a second 5-bit A/D converter with error detector, and a 2.8 V local A/D power supply.
The documentation set supports service and interfacing workflows. It includes IEEE 488 command and programming examples in the instruction manual, plus a two-volume service manual for troubleshooting, repair, and calibration. Trigger-related content covers source, coupling, slope, level, readback, and TV trigger setup/readback, including Option 05 TV Trigger Circuit.
Key Features
- RTD 710A digitizer instrument identification
- Service Volume II manual, part number 070-7206-00
- Instruction, service, interfacing, and rackmount documentation references
- Channel 1 and Channel 2 attenuators and amplifiers
- Track/hold and first A/D converter architecture
- 5-bit A/D converter and latch stage
- 5-bit D/A converter feedback function
- Second 5-bit A/D converter with error detector
- Local A/D power supply specified at 2.8 V
- 200 MHz oscillator for sample clock operation
- 10 kHz oscillator in arm and trigger section
- 68450 DMAC in processing subsystem
Typical Applications
- RTD 710A service reference
- Digitizer troubleshooting workflows
- Repair and calibration documentation
- IEEE 488 command programming
- Waveform memory analysis
- Trigger setup and readback
- Rackmount kit installation reference
Procurement Notes
When requesting a quote for LTE-C1506, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For analog and signal-chain sourcing, supply voltage, bandwidth, accuracy, noise level, package, temperature grade, input/output configuration and qualification requirements should be verified before approval.
FAQ
What product type is associated with LTE-C1506?
The extracted facts identify the associated product type as an RTD 710A digitizer instrument. The title page identifies the instrument model as RTD 710A and the instrument type as Digitizer.
What package case is specified for LTE-C1506?
No package or case is specified in the extracted facts. The CMS package_case field is therefore left empty, and the summary notes that package/case information is not specified.
What conversion architecture is documented for the RTD 710A?
The extracted facts list a track/hold and first A/D converter, plus a second A/D converter, buffer, and power supply. They also specify a 5-bit A/D converter and latch, a 5-bit D/A converter, and a second 5-bit A/D converter with error detector.
What service documentation is included for this instrument?
The documentation set includes an instruction manual, Service Manual Volume 1, Service Manual Volume 2, an Instrument Interfacing Guide, and rackmount kit instructions. The optional service documentation is described as a two-volume Service Manual for troubleshooting, repair, and calibration.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.