XL-2106SYGC Yellow-Green SMD LED

Specifications

Product Overview

The XL-2106SYGC is a XINGLIGHT yellow-green SMD LED supplied in a 2.1 x 0.55 x 1.0 mm surface-mount package. The luminous color is specified as high-brightness yellow-green with transparent/water colloid construction, and the device is listed as compliant with the RoHS Directive. Dimension tolerance is ±0.25 mm unless otherwise noted.

At IF=20 mA and Ta=25°C, the LED is specified for 50-80 mcd luminous intensity, 565-575 nm dominant wavelength, 570 nm typical peak wavelength, 1.8-2.4 V forward voltage, 15 nm typical half-wave width, and a 120° typical viewing angle. Absolute maximum ratings include 50 mW power dissipation, 20 mA continuous forward current, 80 mA peak forward current under pulsed conditions, 5 V reverse voltage, and 2000 V ESD antistatic ability.

Assembly and storage guidance includes MSL 3 handling, up to two reflow cycles, 260°C for no more than 6 seconds lead soldering, and hand soldering below 300°C for less than 3 seconds per terminal. These parameters support use in compact status indicators, panel indicators, handheld devices, and color-coded equipment signals.

Key Features

• 2.1 x 0.55 x 1.0 mm SMD LED package
• High-brightness yellow-green transparent/water colloid emission
• 565-575 nm dominant wavelength at 20 mA
• 50-80 mcd luminous intensity at 20 mA
• 1.8-2.4 V forward voltage at 20 mA
• 120° typical viewing angle at 20 mA
• 20 mA maximum continuous forward current rating
• 80 mA peak forward current under pulsed drive
• 5 V maximum reverse voltage rating
• 2000 V ESD antistatic ability at Ta=25°C
• MSL 3 moisture sensitivity level
• RoHS Directive compliance stated in datasheet

Typical Applications

• Compact status indicators
• Color-coded panel indicators
• Handheld electronics indicators
• Control-board signal LEDs
• Yellow-green equipment indicators
• Space-constrained SMD indicator positions

Procurement Notes

When requesting a quote for XL-2106SYGC, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.