Specifications
| Type | Description |
|---|---|
| Part Number | XL-302SYGC |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Appearance Dimension | F3 / 3.8 x 3.0 x 5.2 x 18 mm |
| Luminous Color | yellow green |
| Colloid / Lens Color | white / water colloid |
| Moisture Sensitivity Level | MSL 2 |
| RoHS Compliance | meets ROHS requirements |
| Power Dissipation | 70 mW |
| Maximum Continuous Forward Current | 20 mA |
| Peak Forward Current | 80 mA |
| Operating Ambient Temperature | -20°C to +85°C |
| Storage Ambient Temperature | -40°C to +85°C |
| Wave Soldering Condition | 240°C, <=6 s |
| Manual Welding Condition | 300°C, 3 s |
| Luminous Intensity | 50 min, 100 typ, 300 max mcd |
| Dominant Wavelength | 562 min, 570 typ, 575 max nm |
| Peak Wavelength | 570 typ nm |
| Forward Voltage | 1.8 min, 2.2 typ, 2.6 max V |
| Viewing Angle | 30 typ deg |
| Spectral Width at Half Height | 20 typ nm |
| Reverse Current | <=10 μA |
| Luminous Intensity Tolerance | ±10% |
| Forward Voltage Tolerance | ±0.1 V |
| Chromaticity Coordinate Tolerance | ±0.01 |
| Wavelength Tolerance | ±1 nm |
| Brightness Grade A1 | 50 to 100 mcd |
| Brightness Grade A2 | 100 to 200 mcd |
| Brightness Grade A3 | 200 to 300 mcd |
| Voltage Grade N12-7 | 1.8 to 2.0 V |
| Voltage Grade N12-8 | 2.0 to 2.2 V |
| Voltage Grade N12-9 | 2.2 to 2.4 V |
| Voltage Grade N13-1 | 2.4 to 2.6 V |
| Wavelength Grade HYG02 | 562.5 to 565 nm |
| Wavelength Grade HYG03 | 565 to 567.5 nm |
| Wavelength Grade HYG04 | 567.5 to 570 nm |
| Wavelength Grade HYG05 | 570 to 572.5 nm |
| Wavelength Grade HYG06 | 572.5 to 575 nm |
| Typical Curves Test Temperature | 25±5°C |
| Working Life Test | 1000 hrs, 22 PCS, fail qty 0/1 |
| High Temperature High Humidity Test | 1000 hrs, 22 PCS, fail qty 0/1 |
| High Temperature Storage Test | 1000 hrs, 22 PCS, fail qty 0/1 |
| Low Temperature Storage Test | 1000 hrs, 22 PCS, fail qty 0/1 |
| Cold and Hot Cycle Test | 100 cycles, 22 PCS, fail qty 0/1 |
| Hot and Cold Impact Test | 100 cycles, 22 PCS, fail qty 0/1 |
| Resistance to Soldering Heat Test | 2 times, 22 PCS, fail qty 0/1 |
| Lead Integrity Test | 3 times, 22 PCS, fail qty 0/1 |
| Outline Dimension Tolerance | ±0.50 mm |
| Packaging Type | in bags |
| Packaging Protection | moisture-proof and anti-electrostatic foil bag |
| Recommended Storage Environment | temperature <=30°C, relative humidity <=70% |
| Recommended Original Package Storage Time | not more than 3 months |
| Cleaning With Ethanol | not more than 3 minutes |
| Lead Bend Distance | at least 2 mm from colloid |
| Electrostatic Protection HBM | <1000 V |
| Electrostatic Protection Machine Model | <100 V |
| Datasheet Status | request_only |
Product Overview
XL-302SYGC is a XINGLIGHT yellow-green through-hole LED supplied in an F3 outline measuring 3.8 x 3.0 x 5.2 x 18 mm with short leads. The datasheet describes the lens/colloid as white / water colloid and identifies the part as MSL 2 with RoHS compliance.
Key Features
- Yellow-green luminous color with 570 nm typical peak wavelength
- F3 through-hole package with 18 mm short leads
- 50 to 300 mcd luminous intensity at 20 mA
- 1.8 to 2.6 V forward voltage range
- 30 degree typical viewing angle at 20 mA
- 20 mA maximum continuous forward current
- MSL 2 moisture sensitivity classification
- Wave soldering rated 240°C for <=6 seconds
- Manual welding rated 300°C for 3 seconds
- Moisture-proof anti-electrostatic foil bag packaging
Typical Applications
- Through-hole status indicators
- Yellow-green panel indication
- PCB-mounted signal lamps
- Current-limited LED circuits
- Visual indication assemblies
- Soldered leaded LED designs
Procurement Notes
When requesting a quote for XL-302SYGC, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Alternatives
EVERLIGHT
204-10SYGC/S530-E2-L
Cross-reference candidate from XINGLIGHT replacement table; validate package, optical/electrical parameters, binning and sourcing requirements before substitution.
EVERLIGHT
TJ-L3FYTGHTCGSFLC7K-A5
Cross-reference candidate from XINGLIGHT replacement table; validate package, optical/electrical parameters, binning and sourcing requirements before substitution.
Application Verification Recommended
Related Technical Articles
FAQ
What package is used for XL-302SYGC?
XL-302SYGC uses an F3 through-hole outline measuring 3.8 x 3.0 x 5.2 x 18 mm. The extracted package information identifies it as a short-lead yellow-green LED.
What are the main optical ratings at 20 mA?
At IF=20mA and Ta=25°C, the datasheet lists luminous intensity of 50 min, 100 typ, 300 max mcd, dominant wavelength of 562 to 575 nm with 570 nm typical, and a 30 degree typical viewing angle.
What soldering limits are specified for this LED?
Wave soldering is specified at 240°C for no more than 6 seconds, and manual welding is specified at 300°C for 3 seconds. In both cases, the solder point must be more than 2.0 mm from the colloid bottom.
How should XL-302SYGC be stored before assembly?
The recommended storage environment is temperature <=30°C and relative humidity <=70%. The original package storage time is listed as not more than 3 months, and packaging uses a moisture-proof anti-electrostatic foil bag.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.