Specifications
| Type | Description |
|---|---|
| Part Number | XL-3210RGBC-WS2812B |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 1204 SMD LED, 3.2 x 1.0 x 1.5 mm |
| Outline Dimensions | 3.2 x 1.0 x 1.5 mm; L/W/H |
| Luminous Color | RGB; transparent colloid |
| Moisture Sensitivity Level | MSL 5 |
| Data Transmission Frequency | 800 Kbps; single-line cascade data transmission |
| Refresh Capability | >=1024 points at 30 frames/s; screen refresh rate 30 fps |
| Grayscale Resolution | 256 levels; PWM output control |
| Port Scan Frequency | 1.5 kHz; output port PWM control |
| Preset Constant Current | 5 mA/channel; optimized preset constant current mode |
| Intra-chip Current Error | <1.5%; constant current accuracy |
| Inter-chip Current Error | <3%; constant current accuracy |
| Operating VDD Range | 4.5-5.5 V; built-in low-voltage reinforcement module, 100% normal operation |
| Supply Voltage Absolute Maximum | 4.0-5.5 V; Ta=25°C |
| Logic Input Voltage | -0.5 to VDD+5.5 V; Ta=25°C |
| Output Port Withstand Voltage | 10 V; Ta=25°C |
| Operating Temperature | -40 to +85 °C; absolute maximum rating |
| Storage Temperature | -40 to +85 °C; absolute maximum rating |
| Reflow Soldering Temperature | 260 °C for 6 s; absolute maximum rating |
| ESD Sensitivity | 2000 V HBM; Ta=25°C |
| Red Luminous Intensity | 80 mcd typ; Ta=25°C |
| Green Luminous Intensity | 280 mcd typ; Ta=25°C |
| Blue Luminous Intensity | 60 mcd typ; Ta=25°C |
| Red Dominant Wavelength | 620-630 nm; IF=5 mA |
| Green Dominant Wavelength | 520-530 nm; IF=5 mA |
| Blue Dominant Wavelength | 465-475 nm; IF=5 mA |
| Red Peak Wavelength | 625 nm typ; Ta=25°C |
| Green Peak Wavelength | 525 nm typ; Ta=25°C |
| Blue Peak Wavelength | 470 nm typ; Ta=25°C |
| Half Intensity Viewing Angle | 120 deg typ; 2θ1/2 |
| Chip Power Supply Voltage | 4.0 V min, 5.0 V max; Ta=25°C |
| Static Current | 0.35 mA typ; VDD=5 V, IOUT off |
| DIN Input High Threshold | 0.5 x VDD min; DIN high-level input |
| DIN Input Low Threshold | 0.3 x VDD max; DIN low-level input |
| DOUT Output High Current | 15 mA typ; DOUT high output, 10 ohm resistor to GND |
| DOUT Sink Current | 17 mA typ; DOUT low output |
| OUT RGB Output Current | 5 mA typ; VDD=5 V, VDS=1 V |
| Output Current Variation vs VDS | 0.5% typ; IOUT=5 mA, VDS=1.0-3.0 V |
| Output Current Variation vs VDD | 5.0% typ; IOUT=5 mA, VDD=4.5-5.5 V |
| Output Current Variation vs Temperature | 5.0% typ; IOUT=5 mA, TA=-40°C to +85°C |
| Output PWM Frequency | 4.5 kHz typ; Iout=5 mA, OUT port connected through 200 ohm resistor to VDD |
| Signal Transmission Delay tPLH | 80 ns typ; DOUT load capacitance 30 pF, DIN to DOUT |
| Signal Transmission Delay tPHL | 80 ns typ; DOUT load capacitance 30 pF, DIN to DOUT |
| DOUT Rise Conversion Time tTLH | 12 ns typ; DOUT load capacitance 30 pF |
| DOUT Fall Conversion Time tTHL | 10 ns typ; DOUT load capacitance 30 pF |
| OUT RGB Rise Time | 500 ns typ; IOUTR/G/B=5 mA, OUTR/G/B through 200 ohm resistor to VDD, load capacitance 30 pF to ground |
| OUT RGB Fall Time | 500 ns typ; IOUTR/G/B=5 mA, OUTR/G/B through 200 ohm resistor to VDD, load capacitance 30 pF to ground |
| Data Word Length | 24 bit; high order first, GRB data order |
| Input 0 Code High Time | 0.3 us min; signal transmission definition |
| Input 1 Code High Time | 0.9 us min; signal transmission definition |
| Input 0 Code Low Time | 0.9 us min; signal transmission definition |
| Input 1 Code Low Time | 0.3 us min; signal transmission definition |
| 0/1 Code Cycle | 1.2 us min; signal transmission definition |
| Reset Low Time | >200 us; reset code low-level time |
| Code Low-Level Time Limit | <20 us; 0-code and 1-code low-level time during programming |
| Room Temperature Life Test | 1000 hrs, 22 samples, 0 failures; JIS7021:B4, Ta=25°C±5°C, IF=5 mA |
| High Temperature Storage Test | 1000 hrs, 22 samples, 0 failures; JIS7021:B10, MIL-STD-202:210A, MIL-STD-750:2031, Ta=85°C±5°C |
| Low Temperature Storage Test | 1000 hrs, 22 samples, 0 failures; JIS7021:B12, Ta=-35°C±5°C |
| High Temperature Humidity Test | 1000 hrs, 22 samples, 0 failures; JIS7021:B11, MIL-STD-202:103D, Ta=85°C±5°C, RH=85% |
| Cold Heat Strike Test | 100 cycles, 22 samples, 0 failures; JIS7021:B4, MIL-STD-202:107D, MIL-STD-750:1026, -10°C±5°C to 100°C±5°C |
| Cold Heat Cycle Test | 100 cycles, 22 samples, 0 failures; JIS7021:A3, MIL-STD-202:107D, MIL-STD-705:105E, -35°C to 25°C to 85°C to -35°C |
| Reliability Criterion Forward Voltage | max initial data x 1.1; IF=5 mA |
| Reliability Criterion Reverse Current | 1 uA max; VR=5 V |
| Reliability Criterion Luminous Intensity | min initial data x 0.7; IF=5 mA |
| Dimension Tolerance | ±0.1 mm; unless otherwise noted |
| Pin 1 Function | GND; signal ground and power ground |
| Pin 2 Function | DIN; display data input |
| Pin 3 Function | VDD; internal IC power positive and RGB positive |
| Pin 4 Function | DOUT; display data cascade output |
| Tape and Reel Dimension Tolerance | ±0.25 mm; unless otherwise noted |
| Hand Soldering Iron Power | <30 W; recommended for repair/rework only |
| Hand Soldering Temperature | <300 °C; less than 3 seconds per terminal, one time only |
| Recommended Maximum Reflow Temperature | 240±5 °C for 6 s; product recommended maximum welding temperature |
| Maximum Reflow Count | 2 times; secondary reflow interval within 8 hours |
| Alcohol Cleaning Condition | 30°C for 3 min or 50°C for 30 s; after soldering |
| Ultrasonic Cleaning Power | <=300 W; pretest required to confirm no LED damage |
| Unopened Shelf Life | 3 months; sealed moisture-proof anti-static bag with desiccant |
| Storage Before Opening | <=30°C, <=60% RH; before opening package |
| Storage After Opening | <=30°C, <=40% RH, use within 24 hours; after opening package |
| Recommended Workshop Condition | <=30°C, <60% RH; operation after opening |
| Baking Condition | 60±5°C for 24 hours; if desiccant/package fails or storage time exceeded |
| Recommended Signal Protection Resistor | 20 ohm to 2 kohm, typically around 500 ohm; series resistor on signal input/output terminals, depends on cascade quantity and transmission distance |
| Datasheet Status | request_only |
Product Overview
The XINGLIGHT XL-3210RGBC-WS2812B is an addressable RGB SMD LED with integrated single-line cascade data transmission. It is supplied in a 1204 SMD LED package with 3.2 x 1.0 x 1.5 mm outline dimensions and transparent colloid RGB luminous output.
The device supports 800 Kbps data transmission, 24-bit high-order-first GRB data order, 256-level PWM output control, and reset low timing greater than 200 us. It can refresh at least 1024 points at 30 frames per second and specifies typical 4.5 kHz output PWM frequency.
Electrical operation is centered on a 4.5-5.5 V operating VDD range with 5 mA/channel preset constant current and 5 mA typical OUT RGB output current. Assembly and handling data include MSL 5, 260 °C for 6 s absolute maximum reflow exposure, recommended 240±5 °C for 6 s reflow, and storage controls before and after package opening.
Key Features
- Addressable RGB SMD LED in 1204 package
- 3.2 x 1.0 x 1.5 mm outline dimensions
- Single-line cascade data transmission at 800 Kbps
- 24-bit high-order-first GRB data format
- 256-level PWM grayscale output control
- 5 mA/channel preset constant current mode
- 4.5-5.5 V operating VDD range
- 4.5 kHz typical output PWM frequency
- 120 degree typical half-intensity viewing angle
- MSL 5 moisture sensitivity classification
Typical Applications
- Cascaded RGB display pixels
- Compact addressable LED indicators
- RGB status lighting assemblies
- Low-current color lighting modules
- Serially controlled LED arrays
- Reflow-assembled SMD lighting boards
Procurement Notes
When requesting a quote for XL-3210RGBC-WS2812B, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
FAQ
What package is used by XL-3210RGBC-WS2812B?
XL-3210RGBC-WS2812B is specified as a 1204 SMD LED with outline dimensions of 3.2 x 1.0 x 1.5 mm. The datasheet also lists a general dimension tolerance of ±0.1 mm unless otherwise noted.
What data format does this addressable RGB LED use?
The device uses 24-bit data words transmitted high order first in GRB data order. Its single-line cascade data transmission frequency is specified as 800 Kbps, with reset low time greater than 200 us.
What current is specified for the RGB outputs?
The datasheet lists a 5 mA/channel preset constant current mode and 5 mA typical OUT RGB output current at VDD=5 V and VDS=1 V. Output current variation is also specified across VDS, VDD, and temperature conditions.
What handling limits apply after opening the package?
After opening, storage is specified at <=30°C and <=40% RH, with use within 24 hours. Recommended workshop conditions are <=30°C and <60% RH, and baking is specified at 60±5°C for 24 hours if storage limits are exceeded.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 1, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.