Specifications
| Type | Description |
|---|---|
| Part Number | XL-3215UGC |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 3.2 x 1.25 x 1.1 mm SMD package |
| Appearance Dimension | 3.2 x 1.25 x 1.1 mm; L/W/H |
| Luminous Color | High brightness emerald green; transparent colloid |
| Colloid / Lens | Transparent colloid; product appearance description |
| Moisture Sensitivity Level | MSL 3 |
| RoHS Compliance | Complies with RoHS Directive |
| Maximum Power Dissipation | 70 mW; Ta=25°C |
| Maximum Continuous Forward Current | 20 mA; Ta=25°C |
| Peak Forward Current | 80 mA; pulse width ≤0.1 ms, duty ≤1/10, Ta=25°C |
| Maximum Reverse Voltage | 5 V; Ta=25°C |
| ESD / Antistatic Ability | 2000 V; Ta=25°C |
| Operating Temperature Range | -40 to +85 °C; Ta=25°C absolute maximum rating table |
| Storage Temperature Range | -40 to +85 °C; Ta=25°C absolute maximum rating table |
| Lead Soldering Temperature / Time | 260°C ≤6 s; Ta=25°C absolute maximum rating table |
| Luminous Intensity | 550 to 1150 mcd; IF=20 mA, Ta=25°C |
| Dominant Wavelength | 515 to 530 nm; IF=20 mA, Ta=25°C |
| Peak Wavelength | 525 nm typ; IF=20 mA, Ta=25°C |
| Forward Voltage | 2.5 to 3.3 V; IF=20 mA, Ta=25°C |
| Viewing Angle | 120° typ; 2θ1/2, IF=20 mA, Ta=25°C |
| Half Wave Width | 30 nm typ; IF=20 mA, Ta=25°C |
| Reverse Current | ≤1 µA; VR=5 V, Ta=25°C |
| Brightness Grade E5 | 550 to 600 mcd; IF=20 mA, brightness error ±10% |
| Brightness Grade E6 | 600 to 700 mcd; IF=20 mA, brightness error ±10% |
| Brightness Grade E7 | 700 to 800 mcd; IF=20 mA, brightness error ±10% |
| Brightness Grade E8 | 800 to 900 mcd; IF=20 mA, brightness error ±10% |
| Brightness Grade E9 | 900 to 1000 mcd; IF=20 mA, brightness error ±10% |
| Brightness Grade F1 | 1000 to 1150 mcd; IF=20 mA, brightness error ±10% |
| Voltage Grade N11-7 | 2.5 to 2.7 V; IF=20 mA, voltage error ±0.1 V |
| Voltage Grade N11-8 | 2.7 to 2.9 V; IF=20 mA, voltage error ±0.1 V |
| Voltage Grade N11-9 | 2.9 to 3.1 V; IF=20 mA, voltage error ±0.1 V |
| Voltage Grade N12-1 | 3.1 to 3.3 V; IF=20 mA, voltage error ±0.1 V |
| Wavelength Grade HG02 | 515 to 520 nm; IF=20 mA, wavelength error ±1 nm |
| Wavelength Grade HG03 | 520 to 525 nm; IF=20 mA, wavelength error ±1 nm |
| Wavelength Grade HG04 | 525 to 530 nm; IF=20 mA, wavelength error ±1 nm |
| General Test Ambient Temperature | 25 ±5 °C; unless otherwise indicated |
| Working Life Test | 1000 hours; continuous lighting at maximum rated current at room temperature; tested at 20 mA |
| High Temperature High Humidity Storage Test | 240 hours ±2 hours; IR reflow in-board 2 times; Ta=85±5°C, RH=90-95% |
| High Temperature Storage Test | 1000 hours; Ta=85±5°C |
| Low Temperature Storage Test | 1000 hours; Ta=-40±5°C |
| Cold and Hot Cycle Test | 100 cycles; 105°C 30 min, 25°C 5 min, -55°C 30 min, 25°C 5 min |
| Hot and Cold Impact Test | 100 cycles; IR reflow in-board 2 times; 100±5°C for 20 min, -40±5°C for 20 min |
| Anti-tin Test | 260±5°C, 10±1 s, 2 times; soldering temperature T.sol |
| Lead Process Reflow Peak Temperature | 235°C +5/-0°C for 10-15 s; lead infrared reflow welding; cooling rate max 6°C/s |
| Lead-free Process Reflow Peak Temperature | 255°C +0/-5°C for 5-10 s; lead-free infrared reflow welding; cooling rate max 6°C/s |
| Weldability Test | 235±5°C, 2±0.5 s immersion time; immersion speed 25±2.5 mm/s; tin loading rate ≥95% pad area |
| Outline Dimension Tolerance | ±0.25 mm; unless otherwise noted; all dimensions in millimeters |
| Hand Soldering Iron Power | <30 W; recommended for repair/rework only |
| Hand Soldering Temperature | <300°C; each terminal less than 3 seconds, one time only |
| Maximum Recommended Welding Temperature | 240±5°C for 6 s; product best maximum soldering temperature recommendation |
| Reflow Soldering Cycles | Maximum 2 times; reflow soldering process |
| Cleaning Condition | Under 30°C for 3 minutes or under 50°C for 30 seconds; alcohol solvent cleaning after soldering |
| Ultrasonic Cleaning Power | ≤300 W; pretest recommended to confirm no LED damage |
| Unopened Storage Condition | ≤30°C, ≤60% RH, use within 1 year; before opening moisture-proof anti-electrostatic package |
| Opened Storage Condition | ≤30°C, ≤40% RH, solder within 168 hours / 7 days; after opening package |
| Recommended Workshop Condition | ≤30°C, ≤60% RH; operation after package opening |
| Baking Condition | 60±5°C for 24 hours; if moisture absorbent has faded or LEDs exceeded storage time |
| Datasheet Status | request_only |
Product Overview
XL-3215UGC is a XINGLIGHT emerald green SMD LED supplied in a 3.2 x 1.25 x 1.1 mm package with transparent colloid. The device is specified as a high brightness emerald green LED and is intended for surface-mount assemblies requiring a compact indicator or display light source.
At IF=20 mA and Ta=25°C, the LED is specified for 550 to 1150 mcd luminous intensity, 515 to 530 nm dominant wavelength, 525 nm typical peak wavelength, 30 nm typical half wave width, and 120° typical viewing angle. The forward voltage range is 2.5 to 3.3 V, with reverse current limited to ≤1 µA at VR=5 V.
Absolute maximum ratings include 70 mW power dissipation, 20 mA continuous forward current, 80 mA peak forward current under pulse conditions, 5 V maximum reverse voltage, and 2000 V ESD/antistatic ability. Assembly and storage controls include MSL 3, maximum two reflow soldering cycles, opened-package soldering within 168 hours, and baking at 60±5°C for 24 hours when required.
Key Features
- 3.2 x 1.25 x 1.1 mm SMD package
- High brightness emerald green luminous color
- Transparent colloid lens construction
- 550 to 1150 mcd at 20 mA
- 515 to 530 nm dominant wavelength
- 525 nm typical peak wavelength
- 2.5 to 3.3 V forward voltage
- 120° typical viewing angle
- 20 mA maximum continuous forward current
- 80 mA peak pulse forward current
- MSL 3 moisture sensitivity classification
- RoHS Directive compliance stated
Typical Applications
- Emerald green status indicators
- Compact SMD display indicators
- Panel indicator lighting
- Portable device indication
- Consumer electronics signal lights
- PCB-mounted visual indicators
- Low-profile equipment displays
Procurement Notes
When requesting a quote for XL-3215UGC, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What package size is used for XL-3215UGC?
XL-3215UGC uses a 3.2 x 1.25 x 1.1 mm SMD package. The outline dimension tolerance is ±0.25 mm unless otherwise noted, with all dimensions specified in millimeters.
What optical output is specified at 20 mA?
At IF=20 mA and Ta=25°C, XL-3215UGC is specified for 550 to 1150 mcd luminous intensity, 515 to 530 nm dominant wavelength, 525 nm typical peak wavelength, and 120° typical viewing angle.
What are the main electrical limits for XL-3215UGC?
The device has a 20 mA maximum continuous forward current, 80 mA peak forward current under pulse conditions, 70 mW maximum power dissipation, 5 V maximum reverse voltage, and 2.5 to 3.3 V forward voltage at 20 mA.
What storage controls apply after opening the package?
After opening, the LEDs should be stored at ≤30°C and ≤40% RH and soldered within 168 hours, or 7 days. Baking at 60±5°C for 24 hours is specified if storage time is exceeded or the moisture indicator has faded.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 1, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.