XL-3216UYC-FJ Yellow SMD LED

Specifications

Product Overview

The XINGLIGHT XL-3216UYC-FJ is a yellow SMD LED supplied in a 3216 surface-mount package with 3.2 x 1.6 x 0.8 mm outline dimensions. The device uses a transparent / water colloid lens and is characterized as a yellow LED with a 587-595 nm dominant wavelength and 590 nm typical peak wavelength at IF=20 mA and Ta=25°C.

Electrical and optical parameters include 260-600 mcd luminous intensity, 1.9-2.4 V forward voltage, 130° typical viewing angle, and 20 nm typical half wave width under the same 20 mA test condition. Absolute maximum ratings include 60 mW power dissipation, 30 mA continuous forward current, 5 V reverse voltage, 2000 V ESD / antistatic ability, and -40 to +85°C operating and storage temperature ranges.

Assembly guidance includes MSL 3 handling, up to two reflow cycles, a recommended maximum welding temperature of 240±5°C for 6 s, and hand soldering limits below 30 W and below 300°C for less than 3 s per terminal. Storage guidance covers unopened and opened package conditions, workshop humidity limits, and baking at 60±5°C for 24 hours when required.

Key Features

• Yellow SMD LED with transparent water colloid lens
• 3216 package with 3.2 x 1.6 x 0.8 mm dimensions
• 260-600 mcd luminous intensity at 20 mA
• 587-595 nm dominant wavelength at 20 mA
• 1.9-2.4 V forward voltage at 20 mA
• 130° typical viewing angle at 20 mA
• 30 mA maximum continuous forward current
• -40 to +85°C operating temperature range
• MSL 3 moisture sensitivity classification
• RoHS Directive compliant environmental process

Typical Applications

• Yellow status indicators
• Surface-mount indicator lamps
• Compact panel indicators
• Signal indication circuits
• Color-coded equipment displays
• Low-profile board indicators
• Reflow-assembled LED boards

Procurement Notes

When requesting a quote for XL-3216UYC-FJ, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.