Specifications
| Type | Description |
|---|---|
| Part Number | XL-504SURD |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Appearance Dimension | F5 / 5.5 x 5.0 x 8.7 x 28 mm; physical package dimensions |
| Luminous Color | Red; red colloid package |
| Colloid Color | Red colloid; package body color |
| RoHS Compliance | Meets RoHS requirements; environmental protection product |
| Moisture Sensitivity Level | MSL 2; moisture sensitivity level |
| Consumed Power | 70 mW; Ta=25°C absolute maximum rating |
| Max Continuous Forward Current | 20 mA; Ta=25°C absolute maximum rating |
| Peak Forward Current | 80 mA; Ta=25°C absolute maximum rating |
| Operating Ambient Temperature | -20°C to +85°C; absolute maximum rating |
| Storage Ambient Temperature | -40°C to +85°C; absolute maximum rating |
| Reflow Soldering Temperature | 240°C, <=6 s; solder point more than 2.0 mm from colloid bottom |
| Manual Welding Temperature | 300°C, 3 s; solder point more than 2.0 mm from colloid bottom |
| Luminous Intensity | min 400 mcd, typ 600 mcd, max 900 mcd; IF=20mA, Ta=25°C |
| Dominant Wavelength | min 615 nm, typ 620 nm, max 625 nm; IF=20mA, Ta=25°C |
| Peak Wavelength | typ 625 nm; IF=20mA, Ta=25°C |
| Forward Voltage | min 1.8 V, typ 2.2 V, max 2.4 V; IF=20mA, Ta=25°C |
| Viewing Angle | typ 30 deg; IF=20mA, Ta=25°C, 2θ1/2 |
| Spectral Width at Half Height | typ 20 nm; IF=20mA, Ta=25°C |
| Reverse Current | max 10 μA; VR=5V, Ta=25°C |
| Light Intensity Tolerance | ±10%; measurement deviation note |
| Forward Voltage Tolerance | ±0.1 V; measurement deviation note |
| Chromaticity Coordinate Tolerance | ±0.01; X,Y coordinate deviation note |
| Wavelength Tolerance | ±1 nm; monochromatic wavelength deviation note |
| Brightness Bin A5 | 400 to 500 mcd; IF=20mA |
| Brightness Bin A6 | 500 to 700 mcd; IF=20mA |
| Brightness Bin A7 | 700 to 900 mcd; IF=20mA |
| Voltage Bin N12-7 | 1.8 to 2.0 V; IF=20mA |
| Voltage Bin N12-8 | 2.0 to 2.2 V; IF=20mA |
| Voltage Bin N12-9 | 2.2 to 2.4 V; IF=20mA |
| Wavelength Bin HR01 | 615 to 620 nm; IF=20mA |
| Wavelength Bin HR02 | 620 to 625 nm; IF=20mA |
| Reliability Working Life | 1000 hrs, 22 PCS, fail quantity 0/1; Ta=25°C ±5°C, IF=20mA |
| Reliability High Temperature High Humidity | 1000 hrs, 22 PCS, fail quantity 0/1; Ta=85°C ±5°C, RH=85% to 90% |
| Reliability High Temperature Storage | 1000 hrs, 22 PCS, fail quantity 0/1; Ta=85°C ±5°C |
| Reliability Low Temperature Storage | 1000 hrs, 22 PCS, fail quantity 0/1; Ta=-40°C ±5°C |
| Reliability Cold and Hot Cycle | 100 cycles, 22 PCS, fail quantity 0/1; 100°C ±5°C for 30 min, 5 min transition, -40°C ±5°C for 30 min |
| Reliability Hot and Cold Impact | 100 cycles, 22 PCS, fail quantity 0/1; 105°C ±5°C for 5 min, -45°C ±5°C for 5 min |
| Resistance to Soldering Heat | 2 times, 22 PCS, fail quantity 0/1; Tsol=250°C ±5°C |
| Lead Integrity Bend Test | 3 times, 22 PCS, fail quantity 0/1; Load 2.5 N (0.25 kgf), 0° to 90° to 0° |
| Outline Dimension Tolerance | ±0.50 mm; unless otherwise specified |
| Packaging Type | In bags; standard packaging |
| Packaging Protection | Moisture proof and anti-electrostatic foil bag; packaging method |
| Recommended Storage Environment | temperature <=30°C, relative humidity <=70%; storage before use |
| Recommended Original Package Storage Time | no more than 3 months; longer storage requires dry box with desiccant or nitrogen |
| Cleaning Solvent Exposure | ethanol wipe or soak <=3 minutes; room temperature cleaning |
| Lead Bending Distance | minimum 2 mm from colloid; lead forming before soldering |
| Electrostatic Protection HBM | HBM <1000 V; ESD precaution note |
| Electrostatic Protection Machine Discharge Mode | <100 V; ESD precaution note |
| Datasheet Status | request_only |
Product Overview
The XL-504SURD is a XINGLIGHT red through-hole LED supplied in an F5 body with 5.5 x 5.0 x 8.7 x 28 mm appearance dimensions. The package uses red colloid and is identified as meeting RoHS requirements, with moisture sensitivity level MSL 2 noted in the datasheet facts.
At IF=20mA and Ta=25°C, the device is specified for 400 mcd minimum, 600 mcd typical, and 900 mcd maximum luminous intensity. The dominant wavelength range is 615 to 625 nm, with a 620 nm typical value and 625 nm typical peak wavelength. Forward voltage is specified from 1.8 V to 2.4 V with 2.2 V typical, while viewing angle is 30° typical.
Assembly and handling data include 240°C reflow soldering for no more than 6 seconds and 300°C manual welding for 3 seconds, with the solder point more than 2.0 mm from the colloid bottom. Storage guidance specifies temperature at or below 30°C and relative humidity at or below 70% before use. The device is suited to red visual indication using a through-hole LED format.
Key Features
- Red through-hole LED in F5 package
- 5.5 x 5.0 x 8.7 x 28 mm body
- Red colloid package body
- 20 mA maximum continuous forward current
- 400 to 900 mcd luminous intensity at IF=20mA
- 615 to 625 nm dominant wavelength range
- 1.8 to 2.4 V forward voltage range
- 30° typical viewing angle at IF=20mA
- Operating ambient temperature -20°C to +85°C
- Moisture proof anti-electrostatic foil bag packaging
Typical Applications
- Red status indication
- Through-hole panel indicators
- 20 mA indicator circuits
- Narrow-angle red signal lamps
- Red visual alert outputs
- Leaded LED assemblies
Procurement Notes
When requesting a quote for XL-504SURD, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Alternatives
EVERLIGHT
333-2SDRD/S530-A3-L
Cross-reference candidate from XINGLIGHT replacement table; validate package, optical/electrical parameters, binning and sourcing requirements before substitution.
EVERLIGHT
TJ-L5FYTGHRMFCLFLC2R-A5
Cross-reference candidate from XINGLIGHT replacement table; validate package, optical/electrical parameters, binning and sourcing requirements before substitution.
Application Verification Recommended
Related Technical Articles
FAQ
What package is used for XL-504SURD?
XL-504SURD uses an F5 through-hole LED package with 5.5 x 5.0 x 8.7 x 28 mm appearance dimensions. The package body is specified as red colloid.
What are the main optical specifications?
At IF=20mA and Ta=25°C, XL-504SURD has 400 to 900 mcd luminous intensity, 615 to 625 nm dominant wavelength, 625 nm typical peak wavelength, 20 nm typical spectral width, and 30° typical viewing angle.
What forward current and voltage ratings apply?
The datasheet facts list 20 mA maximum continuous forward current and 80 mA peak forward current at Ta=25°C. Forward voltage at IF=20mA and Ta=25°C is specified from 1.8 V to 2.4 V, with 2.2 V typical.
What soldering limits are specified?
Reflow soldering is specified at 240°C for no more than 6 seconds. Manual welding is specified at 300°C for 3 seconds. In both cases, the solder point must be more than 2.0 mm from the colloid bottom.
How should XL-504SURD be stored before use?
Recommended storage before use is temperature at or below 30°C and relative humidity at or below 70%. Original package storage time is no more than 3 months unless dry-box storage with desiccant or nitrogen is used.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.