Specifications
| Type | Description |
|---|---|
| Part Number | XL-504UGD |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | F5 round through-hole LED, 5.5 x 5.0 x 8.7 x 28 mm |
| Appearance Dimension | F5 / 5.5 x 5.0 x 8.7 x 28 mm |
| Luminous Color | green |
| Colloid Color | green colloid |
| Moisture Sensitivity Level | MSL 2 |
| RoHS Compliance | meets ROHS requirements |
| Consumed Power | 70 mW at Ta=25°C |
| Max Continuous Forward Current | 20 mA at Ta=25°C |
| Peak Forward Current | 80 mA at Ta=25°C |
| Operating Ambient Temperature | -20°C to +85°C |
| Storage Ambient Temperature | -40°C to +85°C |
| Wave Soldering Condition | 240°C, ≤6 s; solder point more than 2.0 mm from colloid bottom |
| Manual Welding Condition | 300°C, 3 s; solder point more than 2.0 mm from colloid bottom |
| Luminous Intensity | 4000 min, 6000 typ, 8000 max mcd at IF=20 mA, Ta=25°C |
| Dominant Wavelength | 515 min, 520 typ, 530 max nm at IF=20 mA, Ta=25°C |
| Peak Wavelength | 525 typ nm at IF=20 mA, Ta=25°C |
| Forward Voltage | 2.8 min, 3.0 typ, 3.4 max V at IF=20 mA, Ta=25°C |
| Viewing Angle | 30 typ deg at IF=20 mA, Ta=25°C, 2θ1/2 |
| Spectral Width at Half Height | 30 typ nm at IF=20 mA, Ta=25°C |
| Reverse Current | ≤10 µA at VR=5 V, Ta=25°C |
| Luminous Intensity Tolerance | ±10% |
| Forward Voltage Tolerance | ±0.1 V |
| Chromaticity Coordinate Tolerance | ±0.01 for X,Y coordinate measurement |
| Wavelength Tolerance | ±1 nm for monochromatic wavelength measurement |
| Brightness Grade B7 | 4000 to 5000 mcd at IF=20 mA |
| Brightness Grade B8 | 5000 to 6000 mcd at IF=20 mA |
| Brightness Grade B9 | 6000 to 8000 mcd at IF=20 mA |
| Voltage Grade N13-3 | 2.8 to 3.0 V at IF=20 mA |
| Voltage Grade N13-4 | 3.0 to 3.2 V at IF=20 mA |
| Voltage Grade N13-5 | 3.2 to 3.4 V at IF=20 mA |
| Wavelength Grade HG02 | 515 to 520 nm at IF=20 mA |
| Wavelength Grade HG03 | 520 to 525 nm at IF=20 mA |
| Wavelength Grade HG04 | 525 to 530 nm at IF=20 mA |
| Working Life Test | 1000 hrs, 22 pcs, fail qty 0/1 at Ta=25°C ±5°C, IF=20 mA |
| High Temperature High Humidity Test | 1000 hrs, 22 pcs, fail qty 0/1 at Ta=85°C ±5°C, RH=85% to 90% |
| High Temperature Storage Test | 1000 hrs, 22 pcs, fail qty 0/1 at Ta=85°C ±5°C |
| Low Temperature Storage Test | 1000 hrs, 22 pcs, fail qty 0/1 at Ta=-40°C ±5°C |
| Cold and Hot Cycle Test | 100 cycles, 22 pcs, fail qty 0/1; 100°C ±5°C for 30 min, transition 5 min, -40°C ±5°C for 30 min |
| Hot and Cold Impact Test | 100 cycles, 22 pcs, fail qty 0/1; 105°C ±5°C to -45°C ±5°C, 5 min / 5 min |
| Resistance to Soldering Heat Test | 2 times, 22 pcs, fail qty 0/1 at T.sol=250°C ±5°C |
| Lead Integrity Test | 3 times, 22 pcs, fail qty 0/1; Load 2.5 N / 0.25 kgf, 0° to 90° to 0° |
| Outline Dimension Tolerance | ±0.50 mm unless otherwise specified; dimensions in millimeters |
| Packaging Type | in bags |
| Packaging Protection | moisture-proof and anti-electrostatic foil bag |
| Recommended Storage Environment | temperature ≤30°C, relative humidity ≤70% |
| Recommended Original Package Storage Time | ≤3 months; longer storage requires dry box with desiccant or nitrogen |
| Cleaning Limit | ethanol wipe or soak ≤3 minutes at room temperature |
| Lead Bend Distance | ≥2 mm from colloid |
| Electrostatic Protection HBM Limit | HBM <1000 V for InGaN series use with antistatic devices |
| Electrostatic Protection Machine Discharge Limit | machine discharge mode <100 V for InGaN series use with antistatic devices |
| Datasheet Status | request_only |
Product Overview
XINGLIGHT XL-504UGD is a green through-hole LED built in an F5 round package with physical dimensions of 5.5 x 5.0 x 8.7 x 28 mm. The package uses green colloid and is listed with MSL 2 moisture sensitivity. The datasheet states that the product meets RoHS requirements.
Key Features
- Green F5 round through-hole LED package
- 5.5 x 5.0 x 8.7 x 28 mm dimensions
- Green colloid package body
- 20 mA maximum continuous forward current
- 4000 to 8000 mcd luminous intensity at 20 mA
- 515 to 530 nm dominant wavelength range
- 2.8 to 3.4 V forward voltage range
- 30 degree typical viewing angle
- MSL 2 moisture sensitivity level
- Moisture-proof anti-electrostatic foil bag packaging
Typical Applications
- Green panel indicators
- Through-hole status lamps
- PCB-mounted visual indicators
- Signal indication assemblies
- Equipment front-panel LEDs
- Green wavelength indicator circuits
Procurement Notes
When requesting a quote for XL-504UGD, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Alternatives
TOGIALED
TJ-L5FYTGHGMCGLFLC2G-A5
Cross-reference candidate from XINGLIGHT replacement table; validate package, optical/electrical parameters, binning and sourcing requirements before substitution.
Application Verification Recommended
Related Technical Articles
FAQ
What package is used for the XL-504UGD LED?
XL-504UGD uses an F5 round through-hole LED package with physical dimensions of 5.5 x 5.0 x 8.7 x 28 mm. The outline dimension tolerance is ±0.50 mm unless otherwise specified.
What are the optical ratings at 20 mA?
At IF=20 mA and Ta=25°C, XL-504UGD is specified for 4000 to 8000 mcd luminous intensity, 515 to 530 nm dominant wavelength, 525 nm typical peak wavelength, and 30° typical viewing angle.
What soldering limits apply to this through-hole LED?
Wave soldering is specified at 240°C for ≤6 seconds, and manual welding is specified at 300°C for 3 seconds. In both cases, the solder point must be more than 2.0 mm from the colloid bottom.
How should XL-504UGD be stored before assembly?
The recommended storage environment is temperature ≤30°C and relative humidity ≤70%. Original package storage time is ≤3 months; longer storage requires a dry box with desiccant or nitrogen.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.