Specifications
| Type | Description |
|---|---|
| Part Number | XL-504UYD |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Appearance Dimension | F5 / 5.5 x 5.0 x 8.7 x 28 mm |
| Luminous Color | Yellow |
| Colloid Color | Yellow colloid |
| RoHS Compliance | Meets ROHS requirements |
| Moisture Sensitivity Level | MSL 2 |
| Consumed Power | 70 mW |
| Max Continuous Forward Current | 20 mA |
| Peak Forward Current | 80 mA |
| Operating Ambient Temperature | -20°C to +85°C |
| Storage Ambient Temperature | -40°C to +85°C |
| Wave Soldering Condition | 240°C, <=6 s |
| Manual Welding Condition | 300°C, 3 s |
| Luminous Intensity | 400 min, 600 typ, 900 max mcd |
| Dominant Wavelength | 585 min, 590 typ, 595 max nm |
| Peak Wavelength | 590 typ nm |
| Forward Voltage | 1.8 min, 2.0 typ, 2.4 max V |
| Viewing Angle | 30 typ deg |
| Spectral Width at Half Height | 20 typ nm |
| Reverse Current | <=10 µA |
| Luminous Intensity Tolerance | ±10% |
| Forward Voltage Tolerance | ±0.1 V |
| Wavelength Tolerance | ±1 nm |
| Brightness Grade A5 | 400 to 500 mcd |
| Brightness Grade A6 | 500 to 700 mcd |
| Brightness Grade A7 | 700 to 900 mcd |
| Voltage Grade N12-7 | 1.8 to 2.0 V |
| Voltage Grade N12-8 | 2.0 to 2.2 V |
| Voltage Grade N12-9 | 2.2 to 2.4 V |
| Wavelength Grade HY03 | 585 to 587.5 nm |
| Wavelength Grade HY04 | 587.5 to 590 nm |
| Wavelength Grade HY05 | 590 to 592.5 nm |
| Wavelength Grade HY06 | 592.5 to 595 nm |
| Working Life Test | 1000 hrs, 22 pcs, fail qty 0/1 |
| High Temperature High Humidity Test | 1000 hrs, 22 pcs, fail qty 0/1 |
| High Temperature Storage Test | 1000 hrs, 22 pcs, fail qty 0/1 |
| Low Temperature Storage Test | 1000 hrs, 22 pcs, fail qty 0/1 |
| Cold and Hot Cycle Test | 100 cycles, 22 pcs, fail qty 0/1 |
| Hot and Cold Impact Test | 100 cycles, 22 pcs, fail qty 0/1 |
| Resistance to Soldering Heat Test | 2 times, 22 pcs, fail qty 0/1 |
| Lead Integrity Test | 3 times, 22 pcs, fail qty 0/1 |
| Dimension Tolerance | ±0.50 mm unless otherwise mentioned |
| Packaging | In bags; moisture proof and anti-electrostatic foil bag |
| Recommended Storage Environment | Temperature <=30°C, relative humidity <=70% |
| Cleaning Limit | Ethanol wipe or soak no more than 3 minutes |
| Lead Bending Clearance | 2 mm from colloid |
| Electrostatic Protection Limit | HBM <1000 V; machine discharge mode <100 V |
| Datasheet Status | request_only |
Product Overview
The XL-504UYD is a XINGLIGHT yellow through-hole LED built in an F5 package with yellow colloid. Its appearance dimension is specified as 5.5 x 5.0 x 8.7 x 28 mm, with a general dimension tolerance of ±0.50 mm unless otherwise mentioned. The LED is suited to PCB-mounted indication and yellow signal output where a 30° typical viewing angle is appropriate.
At IF=20mA and Ta=25°C, the device provides 400 min, 600 typ, and 900 max mcd luminous intensity. Optical wavelength data includes 585 to 595 nm dominant wavelength, 590 nm typical peak wavelength, and 20 nm typical spectral width at half height. Forward voltage is specified from 1.8 to 2.4 V at the same test current.
Assembly limits include 240°C wave soldering for no more than 6 s and 300°C manual welding for 3 s, with the solder point more than 2.0 mm from the colloid bottom. Handling guidance includes MSL 2, moisture-proof anti-electrostatic foil bag packaging, controlled storage, ethanol cleaning limits, and electrostatic protection below the stated HBM and machine discharge limits.
Key Features
- Yellow luminous color with yellow colloid body
- F5 through-hole package, 5.5 x 5.0 x 8.7 x 28 mm
- 400 to 900 mcd luminous intensity at IF=20mA
- 585 to 595 nm dominant wavelength at IF=20mA
- 1.8 to 2.4 V forward voltage at IF=20mA
- 20 mA maximum continuous forward current at Ta=25°C
- 30° typical viewing angle at IF=20mA
- MSL 2 moisture sensitivity classification
- Meets RoHS requirements
- Moisture-proof anti-electrostatic foil bag packaging
Typical Applications
- Yellow panel indicators
- PCB status indicators
- Signal lamps
- Instrument indication lights
- Through-hole LED assemblies
- Color-coded warning indicators
Procurement Notes
When requesting a quote for XL-504UYD, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
FAQ
What package is used for the XL-504UYD LED?
The XL-504UYD uses an F5 through-hole LED package. The specified appearance dimension is 5.5 x 5.0 x 8.7 x 28 mm, with a general dimension tolerance of ±0.50 mm unless otherwise mentioned.
What are the main optical ratings for XL-504UYD?
At IF=20mA and Ta=25°C, luminous intensity is 400 min, 600 typ, and 900 max mcd. Dominant wavelength is 585 to 595 nm, peak wavelength is 590 nm typical, and viewing angle is 30° typical.
What soldering limits apply to this through-hole LED?
Wave soldering is specified at 240°C for no more than 6 s. Manual welding is specified at 300°C for 3 s. In both cases, the solder point must be more than 2.0 mm from the colloid bottom.
How should XL-504UYD be stored and handled?
Recommended storage is temperature <=30°C and relative humidity <=70%, with original box storage recommended for no more than three months. Packaging is in moisture-proof anti-electrostatic foil bags, and electrostatic protection limits are HBM <1000 V and machine discharge mode <100 V.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.