Specifications
| Type | Description |
|---|---|
| Part Number | XL-HD3535UGC-A4 |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 3535 SMD LED, 3.5 x 3.5 x 2.2 mm |
| Outline Dimensions | 3.5 x 3.5 x 2.2 mm; L/W/H |
| Luminous Color | Green; transparent colloid |
| Colloid | Transparent; green LED |
| Moisture Sensitivity Level | MSL 3; moisture sensitivity level stated as 3 levels |
| Power Dissipation | 3000 mW; Ta=25°C absolute maximum rating |
| Forward Current | 700 mA; Ta=25°C absolute maximum rating |
| Electrostatic Discharge | 2000 V; Ta=25°C absolute maximum rating |
| Operating Temperature Range | -40 to +105°C; absolute maximum rating |
| Storage Temperature Range | -40 to +85°C; absolute maximum rating |
| Lead Soldering Temperature | 260°C for ≤6 s; absolute maximum rating |
| Pulse Width | ≤0.1 ms; note for absolute maximum ratings |
| Pulse Duty Cycle | ≤1/10; note for absolute maximum ratings |
| Luminous Flux | 110-150 lm; IF=350 mA, Ta=25°C |
| Dominant Wavelength | 515-535 nm; IF=350 mA, Ta=25°C |
| Peak Wavelength | 525 nm typ; IF=350 mA, Ta=25°C |
| Forward Voltage | 2.8-3.4 V; IF=350 mA, Ta=25°C |
| Half Light Angle | 120 deg typ; 2θ1/2, Ta=25°C |
| Junction Temperature | 125°C max; Ta=25°C |
| Reverse Current | 5 µA max; VR=5 V, Ta=25°C |
| Brightness Bin K4 | 110-120 lm; IF=350 mA |
| Brightness Bin K5 | 120-130 lm; IF=350 mA |
| Brightness Bin K6 | 130-140 lm; IF=350 mA |
| Brightness Bin K7 | 140-150 lm; IF=350 mA |
| Voltage Bin N13-3 | 2.8-3.0 V; IF=350 mA |
| Voltage Bin N13-4 | 3.0-3.2 V; IF=350 mA |
| Voltage Bin N13-5 | 3.2-3.4 V; IF=350 mA |
| Wavelength Bin HG02 | 515-520 nm; IF=350 mA |
| Wavelength Bin HG03 | 520-525 nm; IF=350 mA |
| Wavelength Bin HG04 | 525-530 nm; IF=350 mA |
| Wavelength Bin HG05 | 530-535 nm; IF=350 mA |
| Test Environment Temperature | 25±5°C; unless otherwise indicated |
| Room Temperature Life Test | 1000 hrs, 22 samples, 0 failures; Ta=25±5°C, IF=700 mA |
| High Temperature Storage Test | 1000 hrs, 22 samples, 0 failures; Ta=85±5°C |
| Low Temperature Storage Test | 1000 hrs, 22 samples, 0 failures; Ta=-35±5°C |
| High Temperature Humidity Test | 1000 hrs, 22 samples, 0 failures; Ta=85±5°C, RH=85% |
| Cold Heat Strike Test | 50 cycles, 22 samples, 0 failures; -10±5°C to 100±5°C |
| Cold Heat Cycle Test | 50 cycles, 22 samples, 0 failures; -35°C to 25°C to 85°C to -35°C |
| Reliability Judging Criterion - Forward Voltage | ≤ initial data x 1.1; IF=700 mA |
| Reliability Judging Criterion - Reverse Current | ≤10 µA; VR=5 V |
| Reliability Judging Criterion - Luminous Intensity | ≥ initial data x 0.7; IF=700 mA |
| Unspecified Dimension Tolerance | ±0.25 mm; outline dimensions unless otherwise noted |
| Tape and Reel Dimensional Tolerance | ±0.1 mm; belt and disk dimensions |
| Hand Soldering Iron Power | <30 W; recommended for hand soldering |
| Hand Soldering Temperature | <300°C; each terminal once only |
| Hand Soldering Time | <3 s; per LED terminal, one time only |
| Reflow Soldering Count | maximum 2 times; Pb-free reflow soldering |
| Recommended Maximum Welding Temperature | 240±5°C for 6 s; reflow soldering recommendation |
| Cleaning Condition | ≤30°C for 3 min or ≤50°C for 30 s; alcohol solvent cleaning after soldering |
| Ultrasonic Cleaning Power | ≤300 W; general maximum ultrasonic power |
| Unopened Storage Condition | ≤30°C, ≤60% RH, use within 1 year; before opening package |
| Opened Storage Condition | ≤30°C, ≤40% RH, solder within 168 hours; after opening package |
| Recommended Workshop Condition | ≤30°C, ≤60% RH; operation after package opening |
| Baking Condition | 60±5°C for 24 hours; if moisture absorbent fades or storage time exceeded |
| Datasheet Status | request_only |
Product Overview
XL-HD3535UGC-A4 is a XINGLIGHT green high power LED supplied in a 3535 SMD LED package. The package outline is 3.5 x 3.5 x 2.2 mm, with transparent colloid and green luminous color. Unspecified outline dimensions use a ±0.25 mm tolerance, while tape and reel belt and disk dimensions use ±0.1 mm tolerance.
At IF=350 mA and Ta=25°C, the device is specified for 110-150 lm luminous flux, 515-535 nm dominant wavelength, 525 nm typical peak wavelength, and 2.8-3.4 V forward voltage. The typical half light angle is 120 degrees, and reverse current is rated at 5 µA maximum at VR=5 V and Ta=25°C.
Absolute maximum ratings include 3000 mW power dissipation, 700 mA forward current, 2000 V electrostatic discharge rating, -40 to +105°C operating temperature range, -40 to +85°C storage temperature range, and 125°C maximum junction temperature. Assembly guidance includes MSL 3 handling, hand soldering below 300°C for under 3 s per terminal, and reflow soldering up to two times.
Key Features
- 3535 SMD package, 3.5 x 3.5 x 2.2 mm
- Green luminous color with transparent colloid construction
- 110-150 lm luminous flux at IF=350 mA
- 515-535 nm dominant wavelength at IF=350 mA
- 2.8-3.4 V forward voltage at IF=350 mA
- 120 degree typical half light angle at Ta=25°C
- 700 mA absolute maximum forward current rating
- -40 to +105°C operating temperature range
- MSL 3 moisture sensitivity level
- Pb-free reflow soldering, maximum two times
Typical Applications
- Green LED light engines
- High-output green indicators
- SMD lighting modules
- Wide-angle status illumination
- Controlled-wavelength green emitters
- Temperature-rated LED assemblies
Procurement Notes
When requesting a quote for XL-HD3535UGC-A4, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
FAQ
What package is used for XL-HD3535UGC-A4?
XL-HD3535UGC-A4 uses a 3535 SMD LED package with outline dimensions of 3.5 x 3.5 x 2.2 mm. The datasheet also states an unspecified outline dimension tolerance of ±0.25 mm.
What optical output is specified at 350 mA?
At IF=350 mA and Ta=25°C, XL-HD3535UGC-A4 is specified for 110-150 lm luminous flux, 515-535 nm dominant wavelength, 525 nm typical peak wavelength, and a 120 degree typical half light angle.
What are the main absolute maximum ratings?
The absolute maximum ratings include 3000 mW power dissipation, 700 mA forward current, 2000 V electrostatic discharge rating, -40 to +105°C operating temperature, and -40 to +85°C storage temperature.
How should opened packages be stored before soldering?
After opening the package, the storage condition is ≤30°C and ≤40% RH, with soldering within 168 hours. The recommended workshop condition after package opening is ≤30°C and ≤60% RH.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.