Specifications
| Type | Description |
|---|---|
| Part Number | EL_PD15-22C-TR8datasheetv6 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Component Type | Sensor |
| Package Case | Miniature flat top view lens SMD package; package dimensions in mm with tolerance ±0.1 mm unless specified |
| Device Number | PD15-22C/TR8 |
| Chip Material | Silicon |
| Lens Color | Water clear |
| Package Type | Miniature flat top view lens SMD package molded in black plastic |
| Spectral Matching | Visible and infrared emitting diode |
| Reverse Voltage | 32 V |
| Operating Temperature | -40 to +100 °C |
| Storage Temperature | -40 to +100 °C |
| Soldering Temperature | 260 °C; soldering time ≤5 seconds |
| Power Dissipation | 150 mW at or below 25 °C free air temperature |
| ESD HBM Level | Min. 2000 V |
| Range of Spectral Bandwidth | 400 to 1100 nm at 10% of λp, Ta=25°C |
| Wavelength of Peak Sensitivity | Typ. 940 nm at Ta=25°C |
| Open-Circuit Voltage | Typ. 0.41 V at Ee=1 mW/cm², λp=940 nm, Ta=25°C |
| Short-Circuit Current | Min. 4.0 µA at Ee=1 mW/cm², λp=940 nm, Ta=25°C |
| Reverse Light Current | Min. 4.2 µA, Typ. 10.0 µA at Ee=1 mW/cm², λp=940 nm, VR=5 V, Ta=25°C |
| Dark Reverse Current | Max. 10 nA at Ee=0 mW/cm², VR=10 V, Ta=25°C |
| Reverse Breakdown Voltage | Min. 32 V, Typ. 170 V at IR=100 µA, Ee=0 mW/cm², Ta=25°C |
| Total Capacitance | Typ. 6.0 pF at f=1 MHz, VR=3 V, Ta=25°C |
| View Angle | Typ. 130 deg at 2θ1/2, VR=5 V, Ta=25°C |
| Carrier Tape Quantity | 3000 pcs/reel |
| Terminal 1 | Anode |
| Terminal 2 | Cathode |
| Hand Soldering Iron Temperature | Less than 350 °C; 3 seconds within once; soldering iron capacity less than 25 W |
| Datasheet Status | request_only |
Product Overview
EL_PD15-22C-TR8datasheetv6 is an EVERLIGHT silicon PIN photodiode sensor identified in the datasheet device selection guide as PD15-22C/TR8. The chip material is silicon, and the lens color is water clear. Its miniature flat top view lens SMD package is molded in black plastic, with package dimensions specified in millimeters and a ±0.1 mm tolerance unless otherwise noted.
The photodiode is specified for spectral matching with visible and infrared emitting diodes. At 25 °C, its spectral bandwidth is 400 to 1100 nm at 10% of λp, with typical peak sensitivity at 940 nm. Electrical values include typical 0.41 V open-circuit voltage, minimum 4.0 µA short-circuit current, minimum 4.2 µA and typical 10.0 µA reverse light current, maximum 10 nA dark reverse current, and typical 6.0 pF total capacitance.
Assembly and handling limits include 260 °C soldering temperature for no more than 5 seconds, and hand soldering below 350 °C for 3 seconds within once using a soldering iron capacity under 25 W. Terminals are defined as anode on terminal 1 and cathode on terminal 2.
Key Features
- Silicon PIN photodiode sensor construction
- Water-clear lens over silicon chip
- Miniature flat top view SMD package
- Black plastic molded package body
- Spectral matching for visible and infrared emitters
- 400 to 1100 nm spectral bandwidth
- Typical 940 nm peak sensitivity
- 32 V absolute maximum reverse voltage
- Typical 6.0 pF total capacitance
- Typical 130 degree view angle
- Terminal 1 anode, terminal 2 cathode
- 3000 pieces per reel carrier tape
Typical Applications
- Visible emitter sensing
- Infrared emitter sensing
- 940 nm optical detection
- Surface-mount photodiode assemblies
- Wide-angle light detection
- Low-capacitance optical sensing
Procurement Notes
When requesting a quote for EL_PD15-22C-TR8datasheetv6, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What type of component is EL_PD15-22C-TR8datasheetv6?
EL_PD15-22C-TR8datasheetv6 is described by the extracted datasheet facts as a silicon PIN photodiode sensor from EVERLIGHT, categorized under LED and identified by device number PD15-22C/TR8.
What spectral range does this photodiode cover?
The photodiode has a specified spectral bandwidth range of 400 to 1100 nm at 10% of λp and Ta=25°C. Its wavelength of peak sensitivity is typically 940 nm.
What package is specified for PD15-22C/TR8?
The datasheet describes the device as a miniature flat top view lens SMD package molded in black plastic. Package dimensions are given in millimeters with ±0.1 mm tolerance unless otherwise specified.
What are the soldering limits for this device?
The soldering temperature limit is 260 °C for a soldering time of 5 seconds or less. Hand soldering is specified below 350 °C for 3 seconds within once using an iron capacity below 25 W.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.