Specifications
| Type | Description |
|---|---|
| Part Number | TLV2462 |
| Manufacturer | Texas Instruments |
| Product Type | Operational Amplifier |
| Category | Signal Chain |
| Component Type | Other |
| Package Case | SOIC (D), MSOP (DGK), PDIP (P), TSSOP/PW, ceramic DIP (JG), ceramic flatpack (U), chip carrier (FK); TLV2462 also listed in SOIC, MSOP, PDIP, ceramic options |
| Amplifier Channels | 2 |
| Amplifier Type | Low-power rail-to-rail input/output operational amplifier |
| Input Common-Mode Range | Extends beyond supply rails |
| Output Swing | Rail-to-rail output swing |
| Supply Voltage Range | 2.7-6 V |
| Input Offset Voltage | 100 µV |
| Input Offset Voltage | 150 µV |
| Input Offset Voltage Max | 2000 µV |
| Input Offset Voltage Max | 1500 µV |
| Supply Current Per Channel | 500 µA/channel |
| Supply Current Per Channel | 550 µA |
| Input Bias Current | 1300 pA |
| Gain Bandwidth Product | 6.4 MHz |
| Slew Rate | 1.6 V/µs |
| Input Noise Voltage | 11 nV/√Hz |
| Output Drive Capability | ±80 mA |
| Output Current | 25 mA |
| Shutdown Function | No shutdown terminal for TLV2462 |
| Shutdown Supply Current | 0.3 µA/channel for TLV2460/3/5 only |
| Shutdown Output State | High impedance |
| Operating Temperature Range | 0°C to 70°C |
| Operating Temperature Range | -40°C to 125°C |
| Operating Temperature Range | -55°C to 125°C |
| TLV2462 SOIC Pinout | Pin 1=1OUT, 2=1IN-, 3=1IN+, 4=GND, 5=2IN+, 6=2IN-, 7=2OUT, 8=VDD+ |
| TLV2462 U Package Pinout | Pin 1=NC, 2=1OUT, 3=1IN-, 4=1IN+, 5=GND, 6=2IN+, 7=2IN-, 8=2OUT, 9=VDD+, 10=NC |
| Package Ordering Option | R suffix indicates tape-and-reel packaging |
| Datasheet Status | request_only |
Product Overview
The TLV2462 is a Texas Instruments dual operational amplifier in the TLV246x low-power rail-to-rail input/output op amp family. The dual-channel pinout identifies separate 1OUT/2OUT and 1IN/2IN signal paths, supporting two amplifier channels in one device. Its input common-mode range extends beyond the supply rails, and the output stage provides rail-to-rail swing for low-voltage systems.
Electrical parameters from the datasheet include a 2.7-6 V supply voltage range, 6.4 MHz gain bandwidth product, 1.6 V/µs slew rate, 11 nV/√Hz input noise voltage, and 1300 pA input bias current. Supply current is specified as 500 µA/channel in the feature list and 550 µA per channel in the selection guide.
Package options include SOIC, MSOP, PDIP, TSSOP/PW, ceramic DIP, ceramic flatpack, and chip-carrier variants. The TLV2462 pinout does not include a shutdown terminal; shutdown-mode data in the family datasheet applies to TLV2460, TLV2463, and TLV2465 members.
Key Features
- Dual operational amplifier with two channels
- Rail-to-rail input and output operational amplifier
- Input common-mode range extends beyond supply rails
- Rail-to-rail output swing for low-voltage systems
- 2.7-6 V supply voltage operating range
- 6.4 MHz gain bandwidth product
- 1.6 V/µs slew rate
- 11 nV/√Hz input noise voltage
- 1300 pA input bias current
- No shutdown terminal on TLV2462
Typical Applications
- Low-voltage signal conditioning
- Dual-channel amplifier circuits
- Rail-to-rail input circuits
- Rail-to-rail output circuits
- SOIC-based signal-chain assemblies
- MSOP-based compact amplifier layouts
- PDIP prototyping amplifier circuits
Procurement Notes
When requesting a quote for TLV2462, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For analog and signal-chain sourcing, supply voltage, bandwidth, accuracy, noise level, package, temperature grade, input/output configuration and qualification requirements should be verified before approval.
FAQ
How many amplifier channels does the TLV2462 include?
The TLV2462 includes two amplifier channels. The datasheet pinout identifies separate 1OUT and 2OUT pins plus corresponding 1IN and 2IN input pins for the dual operational amplifier configuration.
What supply voltage range is specified for TLV2462?
The TLV2462 is specified in the TLV246x selection guide with a 2.7-6 V supply voltage range, matching its low-voltage rail-to-rail input/output operational amplifier family description.
Does the TLV2462 include a shutdown terminal?
No. The TLV2462 pinouts list no shutdown terminal. Shutdown-mode specifications in the family datasheet apply to TLV2460, TLV2463, and TLV2465 family members, not to the TLV2462 pinout.
Which package options are listed for TLV2462?
Package options include SOIC, MSOP, PDIP, TSSOP/PW, ceramic DIP, ceramic flatpack, and chip carrier. The TLV2462 package notes also state that an R suffix indicates tape-and-reel packaging.
How can I source the TLV2462 operational amplifier?
Submit an RFQ through the product page. Our team reviews each sourcing request individually and provides options for the TLV2462 and other Texas Instruments operational amplifiers.
How can I confirm the TLV2462 matches my circuit requirements?
Review the TLV2462 datasheet for electrical specifications including gain bandwidth, slew rate, and supply voltage range. For detailed design verification, consult the application notes on Rail-to-Rail IO Operational Amplifiers from Texas Instruments.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.