Specifications
| Type | Description |
|---|---|
| Part Number | TLV9052 |
| Manufacturer | Texas Instruments |
| Product Type | Operational Amplifier |
| Category | Signal Chain |
| Component Type | Other |
| Package / Case | TLV9052: SOIC-8 4.9mm × 6mm, TSSOP-8 3mm × 6.4mm, VSSOP-8 3mm × 4.9mm, SOT-23-8 2.9mm × 2.8mm, WSON-8 2mm × 2mm |
| Channel Count | 2 channels; TLV9052 device variant |
| Amplifier Type | Rail-to-rail input and output operational amplifier; TLV905x family |
| Slew Rate | 15 V/µs; feature summary |
| Quiescent Current | 330 µA; feature summary |
| Input Offset Voltage | ±0.33 mV; feature summary |
| Unity-Gain Bandwidth | 5 MHz; feature summary |
| Broadband Noise | 15 nV/√Hz; feature summary |
| Input Bias Current | 2 pA; feature summary |
| Supply Voltage Operating Range | 1.8 V to 6.0 V; recommended operating conditions, VS = (V+) - (V-) |
| Low Voltage Operation | 1.8 V minimum; device description |
| Maximum Recommended Supply Voltage | 6.0 V; recommended operating conditions, VS = (V+) - (V-) |
| Absolute Maximum Supply Voltage | 7 V; absolute maximum ratings over operating free-air temperature |
| Recommended Input Pin Voltage | (V-) - 0.1 V to (V+) + 0.1 V; recommended operating conditions |
| Absolute Maximum Common-Mode Input Voltage | (V-) - 0.5 V to (V+) + 0.5 V; absolute maximum ratings, signal input pins |
| Absolute Maximum Differential Input Voltage | (V+) - (V-) + 0.2 V; absolute maximum ratings, signal input pins |
| Absolute Maximum Input Current | -10 mA to 10 mA; absolute maximum ratings, signal input pins |
| Output Short-Circuit Rating | Continuous; short-circuit to ground, one amplifier per package |
| Specified Temperature Range | -40°C to 125°C; recommended operating conditions |
| Maximum Junction Temperature | 150°C; absolute maximum ratings |
| Storage Temperature Range | -65°C to 150°C; absolute maximum ratings |
| ESD HBM Rating | ±4000 V; all packages except TLV9051 X2SON, per ANSI/ESDA/JEDEC JS-001 |
| ESD CDM Rating | ±1500 V; all packages, per JEDEC JESD22-C101 |
| Capacitive Load Drive | 150 pF; TLV905x family description |
| Stability | Unity-gain stable; feature summary |
| Input Protection | Input pins are diode-clamped to power-supply rails; absolute maximum ratings note |
| RFI and EMI Filter | Internal RFI and EMI filter included; feature summary |
| Phase Reversal | Free from phase reversal; overdrive condition |
| TLV9052 Pin 1 | OUT1; TLV9052 8-pin packages |
| TLV9052 Pin 2 | IN1-; TLV9052 8-pin packages |
| TLV9052 Pin 3 | IN1+; TLV9052 8-pin packages |
| TLV9052 Pin 4 | V-; TLV9052 8-pin packages; negative supply or ground for single-supply operation |
| TLV9052 Pin 5 | IN2+; TLV9052 8-pin packages |
| TLV9052 Pin 6 | IN2-; TLV9052 8-pin packages |
| TLV9052 Pin 7 | OUT2; TLV9052 8-pin packages |
| TLV9052 Pin 8 | V+; TLV9052 8-pin packages; positive supply |
| Datasheet Status | request_only |
Product Overview
The TLV9052 is the dual-channel member of the Texas Instruments TLV905x rail-to-rail input and output operational amplifier family. It provides 2 channels, 5 MHz unity-gain bandwidth, 15 V/µs slew rate, 330 µA quiescent current, ±0.33 mV input offset voltage, 15 nV/√Hz broadband noise, and 2 pA input bias current.
The recommended supply range is 1.8 V to 6.0 V, with low-voltage operation specified down to 1.8 V. Recommended input pin voltage spans (V-) - 0.1 V to (V+) + 0.1 V. Absolute maximum limits include 7 V supply voltage, common-mode input voltage from (V-) - 0.5 V to (V+) + 0.5 V, differential input voltage of (V+) - (V-) + 0.2 V, and input current from -10 mA to 10 mA.
Package options for TLV9052 include SOIC-8, TSSOP-8, VSSOP-8, SOT-23-8, and WSON-8. The 8-pin pinout assigns OUT1, IN1-, IN1+, V-, IN2+, IN2-, OUT2, and V+ to pins 1 through 8. The device is unity-gain stable, drives 150 pF capacitive loads, includes an internal RFI and EMI filter, and is free from phase reversal under overdrive conditions.
Key Features
- 2-channel TLV9052 dual operational amplifier
- Rail-to-rail input and output amplifier architecture
- 5 MHz unity-gain bandwidth
- 15 V/µs slew rate
- 330 µA quiescent current
- ±0.33 mV input offset voltage
- 15 nV/√Hz broadband noise
- 2 pA input bias current
- 1.8 V to 6.0 V recommended supply range
- Unity-gain stable with 150 pF capacitive load drive
- Internal RFI and EMI filter included
- Free from phase reversal under overdrive conditions
Typical Applications
- Low-voltage signal conditioning
- Dual-channel sensor interface stages
- Rail-to-rail analog front ends
- Unity-gain buffer circuits
- Capacitive load amplifier outputs
- Filtered signal-chain amplifier nodes
- Single-supply operational amplifier circuits
Procurement Notes
When requesting a quote for TLV9052, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For analog and signal-chain sourcing, supply voltage, bandwidth, accuracy, noise level, package, temperature grade, input/output configuration and qualification requirements should be verified before approval.
FAQ
What type of amplifier is the TLV9052?
The TLV9052 is a Texas Instruments dual RRIO operational amplifier. The extracted datasheet facts identify it as a 2-channel rail-to-rail input and output operational amplifier in the Signal_Chain category.
What supply voltage range is recommended for TLV9052?
The recommended operating supply voltage range is 1.8 V to 6.0 V, measured as VS = (V+) - (V-). The facts also specify 1.8 V minimum low-voltage operation and 6.0 V maximum recommended supply voltage.
Which packages are listed for the TLV9052?
The listed TLV9052 package options are SOIC-8 4.9mm × 6mm, TSSOP-8 3mm × 6.4mm, VSSOP-8 3mm × 4.9mm, SOT-23-8 2.9mm × 2.8mm, and WSON-8 2mm × 2mm.
What are the key dynamic specifications of TLV9052?
Key dynamic specifications from the extracted facts include 5 MHz unity-gain bandwidth and 15 V/µs slew rate. The device is also specified as unity-gain stable and capable of 150 pF capacitive-load drive.
How are the TLV9052 8-pin package pins assigned?
For TLV9052 8-pin packages, pin 1 is OUT1, pin 2 IN1-, pin 3 IN1+, pin 4 V-, pin 5 IN2+, pin 6 IN2-, pin 7 OUT2, and pin 8 V+.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.