Specifications
| Type | Description |
|---|---|
| Part Number | TLV9062 |
| Manufacturer | Texas Instruments |
| Product Type | Operational Amplifier |
| Category | Signal Chain |
| Channel Count | 2 |
| Amplifier Architecture | CMOS operational amplifier |
| Input and Output Swing | Rail-to-rail input and output |
| Supply Voltage Range | 1.8 V to 5.5 V |
| Minimum Operating Supply Voltage | 1.8 V |
| Unity-Gain Bandwidth | 10 MHz |
| Input Offset Voltage | ±0.3 mV |
| Broadband Noise | 10 nV/√Hz |
| Input Bias Current | 0.5 pA |
| Quiescent Current | 538 µA |
| Unity-Gain Stability | Unity-gain stable |
| Integrated EMI/RFI Filtering | Internal RFI and EMI filter |
| Phase Reversal | No phase reversal in overdrive condition |
| Capacitive Load Drive | 100 pF |
| High Capacitive Load Stabilization | Resistive open-loop output impedance simplifies stabilization with higher capacitive loads |
| Shutdown Variant | TLV9062S |
| Shutdown Current | <1 µA typical |
| Operating Temperature Range | -40°C to 125°C |
| Absolute Maximum Supply Voltage | 0 V min, 6 V max |
| Absolute Maximum Common-Mode Input Voltage | (V-) - 0.5 V min, (V+) + 0.5 V max |
| Absolute Maximum Differential Input Voltage | (V+) - (V-) + 0.2 V max |
| Absolute Maximum Input Current | -10 mA min, 10 mA max |
| Output Short-Circuit Rating | Continuous |
| Specified Ambient Temperature | -40°C to 125°C |
| Maximum Junction Temperature | 150°C |
| Storage Temperature Range | -65°C to 150°C |
| Input Clamp Protection | Input pins diode-clamped to power-supply rails |
| TLV9062 SOIC Package | D, 8 pins, 4.90 mm x 3.90 mm |
| TLV9062 TSSOP Package | PW, 8 pins, 3.00 mm x 4.40 mm |
| TLV9062 VSSOP Package | DGK, 8 pins, 3.00 mm x 3.00 mm |
| TLV9062 SOT-23 Package | DDF, 8 pins, 2.90 mm x 1.60 mm |
| TLV9062 WSON Package | DSG, 8 pins, 2.00 mm x 2.00 mm |
| TLV9062 Pin 1 | OUT1 |
| TLV9062 Pin 2 | IN1- |
| TLV9062 Pin 3 | IN1+ |
| TLV9062 Pin 4 | V- |
| TLV9062 Pin 5 | IN2+ |
| TLV9062 Pin 6 | IN2- |
| TLV9062 Pin 7 | OUT2 |
| TLV9062 Pin 8 | V+ |
| Thermal Pad Connection | Connect thermal pad to V- |
| Datasheet Status | request_only |
Product Overview
The TLV9062 is a Texas Instruments dual CMOS operational amplifier for Signal_Chain circuits requiring two amplifier channels in an 8-pin package. It provides rail-to-rail input and output operation across a 1.8 V to 5.5 V supply range, with operation specified down to a 1.8 V minimum supply voltage.
Core electrical parameters include 10 MHz unity-gain bandwidth, ±0.3 mV input offset voltage, 10 nV/√Hz broadband noise, 0.5 pA input bias current, and 538 µA quiescent current. The amplifier is unity-gain stable, has no phase reversal in overdrive conditions, and integrates an internal RFI and EMI filter.
The TLV9062 supports 100 pF capacitive load drive, and its resistive open-loop output impedance simplifies stabilization with higher capacitive loads. Package choices include SOIC-8, TSSOP-8, VSSOP-8, SOT-23-8, and WSON-8. The WSON package includes an exposed thermal pad that should be connected to V-.
Key Features
- Dual CMOS operational amplifier with two channels
- Rail-to-rail input and output operation
- 1.8 V to 5.5 V supply range
- 10 MHz unity-gain bandwidth
- ±0.3 mV input offset voltage
- 10 nV/√Hz broadband noise
- 0.5 pA input bias current
- 538 µA quiescent current
- Internal RFI and EMI filter
- 100 pF capacitive load drive
- No phase reversal in overdrive condition
- -40°C to 125°C operating temperature range
Typical Applications
- Low-voltage signal-chain amplification
- Rail-to-rail analog front ends
- Dual-channel signal conditioning
- Unity-gain buffer circuits
- Capacitive-load amplifier stages
- EMI/RFI-filtered signal paths
- Overdrive-tolerant amplifier circuits
Procurement Notes
When requesting a quote for TLV9062, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For analog and signal-chain sourcing, supply voltage, bandwidth, accuracy, noise level, package, temperature grade, input/output configuration and qualification requirements should be verified before approval.
FAQ
What type of amplifier is the TLV9062?
The TLV9062 is a Texas Instruments dual CMOS operational amplifier. It has two channels, rail-to-rail input and output operation, and is categorized here as a Signal_Chain component.
What supply voltage range does the TLV9062 support?
The TLV9062 operates from 1.8 V to 5.5 V. The extracted datasheet facts also identify 1.8 V as the minimum operating supply voltage for low-voltage operation.
Which packages are available for the TLV9062?
The TLV9062 is listed in SOIC-8, TSSOP-8, VSSOP-8, SOT-23-8, and WSON-8 packages. The WSON-8 package has an exposed thermal pad that should be connected to V-.
Does the TLV9062 include EMI or RFI filtering?
Yes. The extracted facts identify an internal RFI and EMI filter as a device feature of the TLV9062 family, supporting use in signal paths where integrated filtering is required.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.