XL-1005SURC-SA Red SMD LED

Specifications

Product Overview

XL-1005SURC-SA is a XINGLIGHT red SMD LED supplied in an 0402 package with 1.0 x 0.5 x 0.4 mm outline dimensions. The device is described as a red LED using transparent or water colloid construction, with MSL 3 moisture sensitivity and compliance with the RoHS Directive.

Electrical and optical data are specified at IF=20 mA and Ta=25°C unless otherwise indicated. The part has 80 to 240 mcd luminous intensity, 620 to 630 nm dominant wavelength, 625 nm typical peak wavelength, 20 nm typical half wave width, and 120° typical viewing angle. Forward voltage is graded across 1.9 to 2.2 V, with reverse current limited to <=1 µA at VR=5 V.

Assembly data includes a 260°C <=6 s absolute lead soldering rating, recommended maximum welding at 240±5°C for 6 s, and a maximum of two reflow cycles. Hand soldering is recommended only for repair or rework using <30 W, <300°C, and <3 s per terminal. These characteristics suit compact red status indication, panel indicators, portable electronics, and dense surface-mount assemblies.

Key Features

• 0402 SMD package, 1.0 x 0.5 x 0.4 mm
• Red luminous color with transparent water colloid
• 80 to 240 mcd luminous intensity at 20 mA
• 620 to 630 nm dominant wavelength range
• 625 nm typical peak wavelength at 20 mA
• 1.9 to 2.2 V forward voltage range
• 120° typical viewing angle at 20 mA
• 20 mA maximum continuous forward current
• 5 V maximum reverse voltage rating
• -40 to +85°C operating temperature range
• MSL 3 moisture sensitivity classification
• RoHS Directive compliance stated

Typical Applications

• Red status indicators
• Compact panel indicators
• Portable device indicators
• Dense surface-mount assemblies
• Low-profile red indication circuits
• Reflow-assembled LED boards
• Repair or rework assemblies

Procurement Notes

When requesting a quote for XL-1005SURC-SA, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.