Specifications
| Type | Description |
|---|---|
| Part Number | XL-1005SURC |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 0402 SMD, 1.0 x 0.5 x 0.4 mm |
| Outline Dimensions | 1.0 x 0.5 x 0.4 mm; L/W/H |
| Luminous Color | Red; transparent/water-clear colloid |
| Moisture Sensitivity Level | MSL 3 |
| RoHS Compliance | Complies with RoHS Directive; environmental protection products |
| Maximum Power Dissipation | 50 mW at Ta=25°C |
| Maximum Continuous Forward Current | 20 mA at Ta=25°C |
| Peak Forward Current | 60 mA; pulse width ≤0.1 ms, duty ≤1/10, Ta=25°C |
| Maximum Reverse Voltage | 5 V at Ta=25°C |
| ESD Withstand Voltage | 2000 V; antistatic ability, Ta=25°C |
| Operating Temperature Range | -40 to +85 °C; Ta=25°C rating table |
| Storage Temperature Range | -40 to +85 °C; Ta=25°C rating table |
| Lead Soldering Temperature/Time | 260°C for ≤6 s; absolute maximum rating |
| Luminous Intensity | 80 to 120 mcd at IF=20 mA, Ta=25°C |
| Dominant Wavelength | 620 to 625 nm at IF=20 mA, Ta=25°C |
| Peak Wavelength | 625 nm typ at IF=20 mA, Ta=25°C |
| Forward Voltage | 1.9 to 2.1 V at IF=20 mA, Ta=25°C |
| Viewing Angle | 120° typ; 2θ1/2, IF=20 mA, Ta=25°C |
| Half Wave Width | 20 nm typ at IF=20 mA, Ta=25°C |
| Reverse Current | ≤1 µA at VR=5 V, Ta=25°C |
| Brightness Bin | D2: 80 to 120 mcd at IF=20 mA, brightness error ±10% |
| Voltage Bin | N11-4: 1.9 to 2.1 V at IF=20 mA, voltage error ±0.1 V |
| Wavelength Bin | HR02: 620 to 625 nm at IF=20 mA, wavelength error ±1 nm |
| Test Ambient Temperature | 25±5°C unless otherwise indicated |
| Dimension Tolerance | ±0.25 mm unless otherwise noted |
| Tape/Reel Dimension Tolerance | ±0.15 mm for belt and disk dimensions |
| Hand Soldering Iron Power | <30 W; hand soldering recommended only for repair/rework |
| Hand Soldering Temperature | <300°C; each terminal once only, duration <3 s |
| Maximum Reflow Cycles | 2 times for reflow soldering process |
| Recommended Maximum Welding Temperature | 240±5°C for 6 s |
| Cleaning Condition | Alcohol cleaning under 30°C for 3 min or 50°C for 30 s after soldering |
| Ultrasonic Cleaning Power | ≤300 W; pretest required before ultrasonic cleaning |
| Unopened Storage Condition | ≤30°C, ≤60% RH, use within 1 year |
| Opened Storage Condition | ≤30°C, ≤40% RH, solder within 168 hours / 7 days |
| Recommended Workshop Condition | ≤30°C, ≤60% RH after opening package |
| Baking Condition | 60±5°C for 24 hours if desiccant/package failed or storage time exceeded |
| Datasheet Status | request_only |
Product Overview
The XL-1005SURC is a XINGLIGHT red 0402 SMD LED with a 1.0 x 0.5 x 0.4 mm L/W/H outline. The device uses a transparent/water-clear colloid and is specified as an environmental protection product complying with the RoHS Directive. It is supplied as an MSL 3 component, so moisture handling and floor-life controls are part of the assembly process.
Electrical and optical values are specified at IF=20 mA and Ta=25°C unless noted. The LED provides 80 to 120 mcd luminous intensity, 620 to 625 nm dominant wavelength, 625 nm typical peak wavelength, 1.9 to 2.1 V forward voltage, 120° typical viewing angle, 20 nm typical half wave width, and reverse current of ≤1 µA at VR=5 V.
Assembly limits include 260°C for ≤6 s lead soldering, a recommended maximum welding temperature of 240±5°C for 6 s, and a maximum of 2 reflow cycles. Hand soldering is recommended only for repair or rework using <30 W and <300°C for <3 s per terminal.
Key Features
- Red emission with transparent/water-clear colloid
- 0402 SMD package, 1.0 x 0.5 x 0.4 mm
- 80 to 120 mcd luminous intensity at 20 mA
- 620 to 625 nm dominant wavelength at 20 mA
- 1.9 to 2.1 V forward voltage at 20 mA
- 120° typical viewing angle for broad indication
- 20 mA maximum continuous forward current
- 50 mW maximum power dissipation at 25°C
- MSL 3 moisture sensitivity classification
- RoHS Directive compliant environmental protection product
Typical Applications
- Compact red status indicators
- Portable device indicator LEDs
- Dense 0402 SMD assemblies
- Panel and keypad indication
- Low-profile red signal points
- Circuit board visual feedback
Procurement Notes
When requesting a quote for XL-1005SURC, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Alternatives
LITEON
LTST-C283KRKT-5A
Cross-reference candidate from XINGLIGHT replacement table; validate package, optical/electrical parameters, binning and sourcing requirements before substitution.
LITEON
16-213/R6C-A2225VZ/3T
Cross-reference candidate from XINGLIGHT replacement table; validate package, optical/electrical parameters, binning and sourcing requirements before substitution.
LITEON
19-213SURC/S530-A2/TR8
Cross-reference candidate from XINGLIGHT replacement table; validate package, optical/electrical parameters, binning and sourcing requirements before substitution.
Application Verification Recommended
Related Technical Articles
XL-1005SURC 0402 SMD LED: Red LED Binning for SMT Production
The XL-1005SURC is a miniature 0402 red SMD LED designed for automotive, industrial, and consumer electronics. This article provides critical specs, absolute ratings, and assemb...
XL-1005SURC-SA SMD LED — Technical Specifications & Design Guide
The XL-1005SURC-SA from XINGLIGHT is a LED designed for indicator and backlight applications. This technical guide helps design engineers and procurement teams evaluate the comp...
XL-1005SURC-F SMD LED — Technical Specifications & Design Guide
The XL-1005SURC-F from XINGLIGHT is a LED designed for indicator and backlight applications. This technical guide helps design engineers and procurement teams evaluate the compo...
FAQ
What package size does the XL-1005SURC use?
The XL-1005SURC uses a 0402 SMD package with outline dimensions of 1.0 x 0.5 x 0.4 mm for length, width, and height. The datasheet also notes a general dimension tolerance of ±0.25 mm unless otherwise specified.
What are the main optical ratings at 20 mA?
At IF=20 mA and Ta=25°C, the LED is specified for 80 to 120 mcd luminous intensity, 620 to 625 nm dominant wavelength, 625 nm typical peak wavelength, 120° typical viewing angle, and 20 nm typical half wave width.
What forward voltage range is specified for XL-1005SURC?
The forward voltage is specified as 1.9 to 2.1 V at IF=20 mA and Ta=25°C. The listed voltage bin is N11-4, also covering 1.9 to 2.1 V with a voltage error of ±0.1 V.
What soldering limits apply to this LED?
The absolute maximum lead soldering condition is 260°C for ≤6 s. The recommended maximum welding temperature is 240±5°C for 6 s, with a maximum of 2 reflow cycles. Hand soldering is limited to <30 W and <300°C for <3 s per terminal.
How should XL-1005SURC be stored after opening?
After opening the package, the storage condition is ≤30°C and ≤40% RH, and soldering should occur within 168 hours or 7 days. The recommended workshop condition after opening is ≤30°C and ≤60% RH.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.