Specifications
| Type | Description |
|---|---|
| Part Number | XL-1615SURUWC |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | SMD 1.6 x 1.5 x 0.6 mm |
| Outline Dimensions | 1.6 x 1.5 x 0.6 mm; L/W/H |
| Luminous Color and Colloid | Red and white / yellow colloid; general characteristics |
| Moisture Sensitivity Level | MSL 3; general characteristics |
| RoHS Compliance | Complies with RoHS Directive; environmental protection products |
| Power Dissipation, Red | 50 mW max; Ta=25°C |
| Power Dissipation, White | 70 mW max; Ta=25°C |
| Peak Forward Current, Red | 80 mA max; Ta=25°C |
| Peak Forward Current, White | 80 mA max; Ta=25°C |
| Forward Working Current, Red | 20 mA max; Ta=25°C |
| Forward Working Current, White | 20 mA max; Ta=25°C |
| Reverse Voltage, Red | 5 V max; Ta=25°C |
| Reverse Voltage, White | 5 V max; Ta=25°C |
| ESD Rating | 2000 V; Ta=25°C |
| Operating Ambient Temperature | -40°C to +85°C; Topr |
| Storage Temperature | -40°C to +85°C; Tstg |
| Soldering Condition, Reflow | 260°C, 6 s; Tsol |
| Soldering Condition, Manual | 300°C, 3 s; Tsol |
| Luminous Intensity, Red | 80-210 mcd; IF=20 mA, Ta=25°C |
| Luminous Intensity, White | 300-600 mcd; IF=20 mA, Ta=25°C |
| Peak Wavelength, Red | 625 nm typ; IF=20 mA, Ta=25°C |
| Dominant Wavelength, Red | 620-625 nm; IF=20 mA, Ta=25°C |
| Forward Voltage, Red | 1.8-2.1 V; IF=20 mA, Ta=25°C |
| Forward Voltage, White | 2.6-3.4 V; IF=20 mA, Ta=25°C |
| Spectral Half Width, Red | 20 nm typ; IF=20 mA, Ta=25°C |
| Color Coordinate X, White | 0.2388 typ; IF=20 mA, Ta=25°C |
| Color Coordinate Y, White | 0.2165 typ; IF=20 mA, Ta=25°C |
| Viewing Angle | 130 deg typ; 2θ1/2, Ta=25°C |
| Reverse Current | 1 μA max; VR=5 V |
| Brightness Grading | D2:80-120, D3:120-150, D4:150-180, D5:180-210, D9:300-350, E1:350-400, E2:400-450, E3:450-500, E4:500-550, E5:550-600 mcd; IF=20 mA, brightness error ±10% |
| Voltage Grading | R8-3:1.8-2.1, N13-2:2.6-2.8, N13-3:2.8-3.0, N13-4:3.0-3.2, N13-5:3.2-3.4 V; IF=20 mA, voltage error ±0.1 V |
| Wavelength Grading | HR02:620-625 nm; IF=20 mA, wavelength error ±1 nm |
| Dimension Tolerance | ±0.25 mm; unless otherwise noted |
| Recommended Hand Soldering | Soldering iron <30 W, temperature <300°C, <3 s per terminal, one time only; repair/rework use |
| Recommended Maximum Reflow Temperature | 240±5°C for 6 s; product recommendation |
| Reflow Cycle Limit | Maximum 2 times; reflow soldering |
| Opened Package Floor Life | 168 hours / 7 days; ≤30°C and <40%RH after opening |
| Baking Condition | 60±5°C for 24 hours; if desiccant faded or storage time exceeded |
| Datasheet Status | request_only |
Product Overview
XL-1615SURUWC is a XINGLIGHT red/white bicolor SMD LED built in a compact 1.6 x 1.5 x 0.6 mm package. The datasheet identifies the luminous color and colloid as red and white with yellow colloid, with dimensions controlled to ±0.25 mm unless otherwise noted.
At IF=20 mA and Ta=25°C, the red channel is specified at 80-210 mcd with a 625 nm typical peak wavelength, 620-625 nm dominant wavelength, and 20 nm typical spectral half width. The white channel is specified at 300-600 mcd with typical color coordinates of x=0.2388 and y=0.2165. Both channels have a 130° typical viewing angle.
Electrical and assembly limits include 20 mA maximum forward working current per color, 80 mA maximum peak forward current per color, 5 V maximum reverse voltage per color, and 1 μA maximum reverse current at VR=5 V. The part is MSL 3, supports a 168-hour floor life after opening at ≤30°C and <40%RH, and has defined reflow, hand soldering, and baking conditions.
Key Features
- Red and white bicolor emission in SMD package
- 1.6 x 1.5 x 0.6 mm outline dimensions
- Yellow colloid with red and white luminous colors
- 20 mA maximum forward working current per color
- Red luminous intensity range of 80-210 mcd
- White luminous intensity range of 300-600 mcd
- Red peak wavelength specified at 625 nm typical
- 130 degree typical viewing angle at Ta=25°C
- MSL 3 moisture sensitivity classification
- RoHS Directive compliant according to datasheet
Typical Applications
- Compact status indicators
- Red and white signal lamps
- Panel indication lights
- Portable device indicators
- Consumer electronics displays
- Multicolor notification LEDs
- SMD circuit board indicators
Procurement Notes
When requesting a quote for XL-1615SURUWC, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Alternatives
LITEON
LTW-C195UCKF-5A
Cross-reference candidate from XINGLIGHT replacement table; validate package, optical/electrical parameters, binning and sourcing requirements before substitution.
LITEON
19-223/S2T1D-C30/2T
Cross-reference candidate from XINGLIGHT replacement table; validate package, optical/electrical parameters, binning and sourcing requirements before substitution.
Application Verification Recommended
FAQ
What type of LED is XL-1615SURUWC?
XL-1615SURUWC is a XINGLIGHT red/white bicolor SMD LED. The datasheet lists a 1.6 x 1.5 x 0.6 mm package and red and white luminous colors with yellow colloid.
What are the forward voltage ranges for each color?
At IF=20 mA and Ta=25°C, the red channel forward voltage is specified as 1.8-2.1 V. The white channel forward voltage is specified as 2.6-3.4 V.
What soldering limits are specified for this LED?
The datasheet lists reflow soldering at 260°C for 6 s and manual soldering at 300°C for 3 s. It also recommends a maximum reflow temperature of 240±5°C for 6 s and a maximum of two reflow cycles.
What handling conditions apply after the package is opened?
XL-1615SURUWC is rated MSL 3. After opening, the floor life is 168 hours or 7 days at ≤30°C and <40%RH. Baking is specified at 60±5°C for 24 hours if required.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.