XL-2012UYC Yellow SMD LED

Specifications

Product Overview

The XINGLIGHT XL-2012UYC is a yellow surface-mount LED supplied in a 2012 SMD package with 2.0 x 1.2 x 0.8 mm outline dimensions. The device uses a transparent/water colloid construction and is specified as a yellow luminous-color LED for compact board-level indication and display use.

At IF=20 mA and Ta=25°C, XL-2012UYC provides 80 to 210 mcd luminous intensity, 585 to 595 nm dominant wavelength, 590 nm typical peak wavelength, 20 nm typical half-wave width, and a 120° typical viewing angle. Forward voltage is specified from 1.8 to 2.4 V at the same test current, with reverse current limited to ≤1 µA at VR=5 V.

Absolute maximum ratings include 50 mW power dissipation, 20 mA continuous forward current, 80 mA peak forward current for pulse width ≤0.1 ms and duty ≤1/10, 5 V reverse voltage, and a 2000 V ESD rating. Operating and storage temperature ranges are both -40 to +85°C.

Assembly guidance includes MSL 3 handling, recommended maximum reflow soldering of 240 ±5°C for 6 s, up to two reflow cycles, and hand soldering limited to <300°C for <3 s per terminal using an iron below 30 W.

Key Features

• 2012 SMD package, 2.0 x 1.2 x 0.8 mm
• Yellow luminous output with transparent/water colloid construction
• 80 to 210 mcd luminous intensity at 20 mA
• 585 to 595 nm dominant wavelength at 20 mA
• 1.8 to 2.4 V forward voltage at 20 mA
• 120° typical viewing angle for board-level indication
• 20 mA maximum continuous forward current rating
• 80 mA peak forward current under pulsed conditions
• -40 to +85°C operating temperature range
• MSL 3 moisture sensitivity classification
• RoHS Directive compliance stated in datasheet
• Two maximum reflow soldering cycles specified

Typical Applications

• Yellow status indicators
• Compact panel indicators
• PCB-mounted signal lights
• Consumer device indicators
• Instrumentation display points
• Control panel backlighting
• Portable equipment indicators
• Reflow-assembled LED boards

Procurement Notes

When requesting a quote for XL-2012UYC, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.