Specifications
| Type | Description |
|---|---|
| Part Number | XL-3210SURUGC |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | SMD LED, 3.2 x 1.0 x 1.5 mm |
| Outline Dimensions | 3.2 x 1.0 x 1.5 mm; L/W/H |
| Luminous Color | Red and green; bi-color LED |
| Lens / Colloid | Water clear / transparent colloid; package appearance |
| Moisture Sensitivity Level | MSL 3 |
| Consumed Power | 50 mW; Red, Ta=25°C |
| Consumed Power | 70 mW; Green, Ta=25°C |
| Peak Forward Current | 80 mA; Red, pulse width <=0.1 ms, duty <=1/10, Ta=25°C |
| Peak Forward Current | 80 mA; Green, pulse width <=0.1 ms, duty <=1/10, Ta=25°C |
| Forward Working Current | 20 mA; Red, Ta=25°C |
| Forward Working Current | 20 mA; Green, Ta=25°C |
| Reverse Voltage | 5 V; Red, Ta=25°C |
| Reverse Voltage | 5 V; Green, Ta=25°C |
| ESD Rating | 2000 V; antistatic ability |
| Operating Ambient Temperature | -40°C to +85°C; Topr |
| Storage Ambient Temperature | -40°C to +85°C; Tstg |
| Reflow Soldering Limit | 260°C, 6 s; absolute maximum soldering condition |
| Manual Welding Limit | 300°C, 3 s; absolute maximum soldering condition |
| Light Intensity | min 180 mcd; Red, IF=20 mA, Ta=25°C |
| Light Intensity | typ 750 mcd; Green, IF=20 mA, Ta=25°C |
| Dominant Wavelength | 620-630 nm; Red, IF=20 mA, Ta=25°C |
| Dominant Wavelength | 520-530 nm; Green, IF=20 mA, Ta=25°C |
| Peak Wavelength | typ 625 nm; Red, IF=20 mA, Ta=25°C |
| Peak Wavelength | typ 525 nm; Green, IF=20 mA, Ta=25°C |
| Half Wave Width | typ 20 nm; Red, IF=20 mA, Ta=25°C |
| Half Wave Width | typ 30 nm; Green, IF=20 mA, Ta=25°C |
| Forward Voltage | 1.7-2.3 V; Red, IF=20 mA, Ta=25°C |
| Forward Voltage | 2.6-3.2 V; Green, IF=20 mA, Ta=25°C |
| Viewing Angle | typ 120 deg; Red/Green, IF=20 mA, 2θ1/2, Ta=25°C |
| Reverse Current | max 5 uA; Red, VR=5 V, Ta=25°C |
| Reverse Current | max 5 uA; Green, VR=5 V, Ta=25°C |
| Brightness Grade D3 | 120-150 mcd; IF=20 mA |
| Brightness Grade D4 | 150-180 mcd; IF=20 mA |
| Brightness Grade D5 | 180-210 mcd; IF=20 mA |
| Brightness Grade D6 | 210-240 mcd; IF=20 mA |
| Brightness Grade E4 | 500-550 mcd; IF=20 mA |
| Brightness Grade E5 | 550-600 mcd; IF=20 mA |
| Brightness Grade E6 | 600-700 mcd; IF=20 mA |
| Brightness Grade E7 | 700-800 mcd; IF=20 mA |
| Brightness Grade E8 | 800-900 mcd; IF=20 mA |
| Brightness Grade E9 | 900-1000 mcd; IF=20 mA |
| Brightness Grade F1 | 1000-1150 mcd; IF=20 mA |
| Voltage Grade N12-7 | 1.8-2.0 V; IF=20 mA |
| Voltage Grade N12-8 | 2.0-2.2 V; IF=20 mA |
| Voltage Grade N12-9 | 2.2-2.4 V; IF=20 mA |
| Voltage Grade N13-2 | 2.6-2.8 V; IF=20 mA |
| Voltage Grade N13-3 | 2.8-3.0 V; IF=20 mA |
| Voltage Grade N13-4 | 3.0-3.2 V; IF=20 mA |
| Wavelength Grade HR02 | 620-625 nm; IF=20 mA |
| Wavelength Grade HR03 | 625-630 nm; IF=20 mA |
| Wavelength Grade HG03 | 520-525 nm; IF=20 mA |
| Wavelength Grade HG04 | 525-530 nm; IF=20 mA |
| Test Environment Temperature | 25±5°C; unless otherwise indicated |
| Dimension Tolerance | ±0.25 mm; unless otherwise noted |
| Tape / Reel Dimension Tolerance | ±0.1 mm; belt and disk dimensions |
| Recommended Maximum Reflow Soldering Temperature | 240±5°C for 6 s; product recommended maximum welding temperature |
| Maximum Reflow Cycles | 2 times; reflow soldering |
| Hand Soldering Iron Power | less than 30 W; hand soldering recommended only for repair/rework |
| Hand Soldering Temperature | under 300°C; each terminal one time only |
| Hand Soldering Duration | less than 3 s; each terminal one time only |
| Cleaning Solvent | Alcohol recommended; after soldering |
| Cleaning Condition | under 30°C for 3 minutes or under 50°C for 30 seconds; alcohol cleaning after soldering |
| Ultrasonic Cleaning Power | max 300 W; pretest recommended before cleaning |
| Unopened Storage Condition | 30°C or less, less than 60% RH, use within 1 year; before opening package |
| Opened Storage Condition | 30°C or less, less than 40% RH, solder within 168 hours / 7 days; after opening package |
| Recommended Workshop Condition | 30°C or less, less than 60% RH; product operation environment |
| Baking Condition | 60±5°C for 24 hours; if desiccant has faded or LEDs exceeded storage time |
| Datasheet Status | request_only |
Product Overview
XL-3210SURUGC is a XINGLIGHT red and green bi-color LED intended for surface-mount assembly. The package outline is 3.2 x 1.0 x 1.5 mm, with a water clear lens and transparent colloid appearance. The datasheet lists the device as an LED component with MSL 3 moisture sensitivity.
Electrical and optical ratings are specified at Ta=25°C unless otherwise noted. Both red and green channels use 20 mA forward working current and 5 V reverse voltage ratings. Red luminous output is specified as minimum 180 mcd at IF=20 mA, while green luminous output is typical 750 mcd at the same current. Dominant wavelength ranges are 620-630 nm for red and 520-530 nm for green.
Assembly limits include an absolute reflow soldering limit of 260°C for 6 seconds and a recommended maximum reflow condition of 240±5°C for 6 seconds, with up to 2 reflow cycles. Hand soldering guidance specifies less than 30 W iron power, under 300°C, and less than 3 seconds per terminal.
Key Features
- Red and green bi-color LED output
- 3.2 x 1.0 x 1.5 mm SMD package
- Water clear lens with transparent colloid
- MSL 3 moisture sensitivity level
- 20 mA forward working current per color
- Red dominant wavelength range of 620-630 nm
- Green dominant wavelength range of 520-530 nm
- Typical 120 degree viewing angle
- -40°C to +85°C operating temperature range
- 2000 V antistatic ability rating
Typical Applications
- Bi-color status indicators
- Panel indication lights
- Mode and state indication
- Compact surface-mount displays
- Red green signal indication
- PCB-mounted visual alerts
Procurement Notes
When requesting a quote for XL-3210SURUGC, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
FAQ
What type of LED is XL-3210SURUGC?
XL-3210SURUGC is a XINGLIGHT red and green bi-color LED in an SMD LED package measuring 3.2 x 1.0 x 1.5 mm, with a water clear lens and transparent colloid package appearance.
What are the forward voltage ratings for each color?
At IF=20 mA and Ta=25°C, the red channel forward voltage is specified as 1.7-2.3 V. Under the same test condition, the green channel forward voltage is specified as 2.6-3.2 V.
What optical wavelengths are specified for this LED?
The red channel has a 620-630 nm dominant wavelength and typical 625 nm peak wavelength. The green channel has a 520-530 nm dominant wavelength and typical 525 nm peak wavelength, both specified at IF=20 mA and Ta=25°C.
What soldering conditions are listed in the datasheet?
The absolute reflow soldering limit is 260°C for 6 seconds. The recommended maximum reflow soldering temperature is 240±5°C for 6 seconds, with a maximum of 2 reflow cycles. Hand soldering is under 300°C for less than 3 seconds per terminal.
How should opened packages be stored before soldering?
After opening the package, the storage condition is 30°C or less and less than 40% RH. The datasheet specifies soldering within 168 hours, or 7 days, after opening.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 1, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.