XL-3216UYC-FB High Brightness Yellow SMD LED

Specifications

Product Overview

XL-3216UYC-FB is a XINGLIGHT high brightness yellow SMD LED supplied in a compact 3216 package. The appearance dimensions are 3.2 x 1.6 x 0.9 mm, with an outline dimensional tolerance of ±0.25 mm unless otherwise noted. The device is described as a yellow LED with transparent colloid encapsulation and RoHS Directive compliance.

At IF=20 mA and Ta=25°C, the LED is specified for 80 to 180 mcd luminous intensity, 585 to 595 nm dominant wavelength, 588 nm typical peak wavelength, 20 nm typical half wave width, and 120° typical viewing angle. Forward voltage is 1.8 to 2.4 V at IF=20 mA, and reverse current is ≤1 µA at VR=5 V.

Absolute maximum ratings include 50 mW power dissipation, 20 mA continuous forward current, 80 mA peak forward current for pulse width ≤0.1 ms and duty ≤1/10, 5 V reverse voltage, and 2000 V antistatic ability. Assembly guidance includes MSL 3 handling, lead soldering at 260°C for ≤6 s, hand soldering below 300°C for less than 3 s per terminal, and up to two reflow cycles.

Key Features

• 3216 SMD package, 3.2 x 1.6 x 0.9 mm
• High brightness yellow emission with transparent colloid
• 80 to 180 mcd luminous intensity at 20 mA
• 585 to 595 nm dominant wavelength range
• 1.8 to 2.4 V forward voltage at 20 mA
• 120° typical viewing angle for broad indication
• 20 mA maximum continuous forward current rating
• 80 mA peak forward current under pulsed conditions
• MSL 3 moisture sensitivity classification
• RoHS Directive compliance stated in datasheet
• -40 to +85°C operating temperature range
• 2000 V antistatic ability rating

Typical Applications

• Yellow status indicators
• PCB-mounted signal lamps
• Compact panel indication
• Display indicator points
• Equipment warning indicators
• Low-profile SMD indicator arrays
• Color-coded user interfaces

Procurement Notes

When requesting a quote for XL-3216UYC-FB, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.