Images for reference only

XL-A524SURUBC Red Blue Common Cathode LED

Q: What LED configuration does XL-A524SURUBC use?

XL-A524SURUBC is specified as a red/blue dual-color LED with a common cathode configuration. This means the red and blue LED channels share a cathode connection while retaining separate color operation.

Q: What are the optical ratings at 20 mA?

At IF=20 mA and Ta=25°C, the red channel is rated 400-700 mcd with 630-640 nm dominant wavelength. The blue channel is rated 900-1800 mcd with 460-475 nm dominant wavelength.

Q: What soldering limits apply to this through-hole LED?

Wave soldering is limited to 240°C max for no more than 6 seconds. Manual soldering is specified at 300°C for 3 seconds. In both cases, the soldering point must be more than 2.0 mm from the colloid bottom.

Q: What storage conditions are recommended for XL-A524SURUBC?

The recommended storage environment is temperature <=30°C and relative humidity <=70%. Original box storage duration is specified as no more than 3 months.

RFQ Available Sourcing Support Alternative Matching RoHS

Part Number: XL-A524SURUBC
Manufacturer: XINGLIGHT
Package: F5 through-hole LED, 5.8 x 5.0 x 8.7 x 28 mm
Category: LED
Product Type: SMD LED

Request Quote Request Datasheet

Quick Sourcing Note

XL-A524SURUBC from XINGLIGHT is a red/blue common cathode LED in an F5 through-hole package measuring 5.8 x 5.0 x 8.7 x 28 mm. It uses a transparent water-clear colloid and supports 20 mA continuous forward current per color at Ta=25°C. Red output is specified at 400-700 mcd with 630-640 nm dominant wavelength, while blue output is 900-1800 mcd with 460-475 nm dominant wavelength. The device has a 30 deg typical viewing angle, MSL 2 classification, RoHS compliance, and operating temperature range from -20 to +85°C for panel indication, dual-color status display, and through-hole LED assemblies.

Specifications

Type	Description
Part Number	XL-A524SURUBC
Manufacturer	XINGLIGHT
Product Type	SMD LED
Category	LED
Package / Case	F5 through-hole LED, 5.8 x 5.0 x 8.7 x 28 mm
LED Configuration	Common cathode; red/blue dual-color LED
Lens / Colloid	Transparent / water-clear colloid; high brightness red and blue LED
Moisture Sensitivity Level	MSL 2; product specification
RoHS Compliance	Meets RoHS requirements; environmental protection product
Max Power Dissipation, Red	50 mW; Ta=25°C
Max Power Dissipation, Blue	70 mW; Ta=25°C
Max Continuous Forward Current, Red	20 mA; Ta=25°C
Max Continuous Forward Current, Blue	20 mA; Ta=25°C
Peak Forward Current, Red	80 mA; Ta=25°C
Peak Forward Current, Blue	80 mA; Ta=25°C
Operating Temperature Range	-20 to +85 °C; absolute maximum rating
Storage Temperature Range	-40 to +85 °C; absolute maximum rating
Wave Soldering Temperature	240 °C max, <=6 s; soldering point more than 2.0 mm from colloid bottom
Manual Soldering Temperature	300 °C, 3 s; soldering point more than 2.0 mm from colloid bottom
Luminous Intensity, Red	400-700 mcd; IF=20 mA, Ta=25°C
Luminous Intensity, Blue	900-1800 mcd; IF=20 mA, Ta=25°C
Dominant Wavelength, Red	630-640 nm; IF=20 mA, Ta=25°C
Dominant Wavelength, Blue	460-475 nm; IF=20 mA, Ta=25°C
Peak Wavelength, Red	640 nm typ; IF=20 mA, Ta=25°C
Peak Wavelength, Blue	465 nm typ; IF=20 mA, Ta=25°C
Forward Voltage, Red	1.8-2.4 V; IF=20 mA, Ta=25°C
Forward Voltage, Blue	2.8-3.4 V; IF=20 mA, Ta=25°C
Viewing Angle	30 deg typ; IF=20 mA, red and blue
Reverse Current, Red	<=10 µA; VR=5 V, Ta=25°C
Reverse Current, Blue	<=10 µA; VR=5 V, Ta=25°C
Luminous Intensity Tolerance	±10%; optical measurement note
Forward Voltage Tolerance	±0.1 V; electrical measurement note
Wavelength Tolerance	±1 nm; optical measurement note
Brightness Bin A5	400-500 mcd; IF=20 mA
Brightness Bin A6	500-700 mcd; IF=20 mA
Brightness Bin A8	900-1200 mcd; IF=20 mA
Brightness Bin A9	1200-1500 mcd; IF=20 mA
Brightness Bin E1	1500-1800 mcd; IF=20 mA
Voltage Bin N12-7	1.8-2.0 V; IF=20 mA
Voltage Bin N12-8	2.0-2.2 V; IF=20 mA
Voltage Bin N12-9	2.2-2.4 V; IF=20 mA
Voltage Bin N13-3	2.8-3.0 V; IF=20 mA
Voltage Bin N13-4	3.0-3.2 V; IF=20 mA
Voltage Bin N13-5	3.2-3.4 V; IF=20 mA
Wavelength Bin HB04	460-465 nm; IF=20 mA
Wavelength Bin HB05	465-470 nm; IF=20 mA
Wavelength Bin HB06	470-475 nm; IF=20 mA
Wavelength Bin HR04	630-635 nm; IF=20 mA
Wavelength Bin HR05	635-640 nm; IF=20 mA
Working Life Test	1000 h, 22 pcs, fail quantity 0/1; Ta=25°C ±5°C, IF=20 mA
High Temperature High Humidity Test	1000 h, 22 pcs, fail quantity 0/1; Ta=85°C ±5°C, RH=85-90%
High Temperature Storage Test	1000 h, 22 pcs, fail quantity 0/1; ambient temperature Ta=85°C ±5°C
Low Temperature Storage Test	1000 h, 22 pcs, fail quantity 0/1; ambient temperature Ta=-40°C ±5°C
Cold and Hot Cycle Test	100 cycles, 22 pcs, fail quantity 0/1; 100°C ±5°C for 30 min, 5 min transition, -40°C ±5°C for 30 min
Hot and Cold Impact Test	100 cycles, 22 pcs, fail quantity 0/1; 105°C ±5°C for 5 min, -45°C ±5°C for 5 min
Resistance to Soldering Heat Test	2 times, 22 pcs, fail quantity 0/1; solder temperature T.sol=250°C ±5°C
Lead Integrity Test	3 times, 22 pcs, fail quantity 0/1; load 2.5 N (0.25 kgf), bend 0° to 90° to 0°
Dimensional Tolerance	±0.50 mm; unless otherwise specified
Storage Condition	Temperature <=30°C, relative humidity <=70%; recommended LED storage environment
Recommended Original Package Storage Duration	No more than 3 months; original box storage
Minimum Lead Bend Distance	2 mm from colloid; lead forming / bracket bending
Cleaning With Ethanol	No more than 3 minutes; room temperature cleaning
ESD Human Body Model Limit	<1000 V; InGaN series product use
ESD Machine Model Limit	<100 V; InGaN series product use
Datasheet Status	request_only

Product Overview

XL-A524SURUBC is a XINGLIGHT red blue common cathode LED built as an F5 through-hole component with a 5.8 x 5.0 x 8.7 x 28 mm package outline. The lens is specified as transparent / water-clear colloid for the high brightness red and blue LED structure, and the LED configuration is common cathode.

At IF=20 mA and Ta=25°C, the red channel provides 400-700 mcd luminous intensity, 630-640 nm dominant wavelength, 640 nm typical peak wavelength, and 1.8-2.4 V forward voltage. Under the same conditions, the blue channel provides 900-1800 mcd, 460-475 nm dominant wavelength, 465 nm typical peak wavelength, and 2.8-3.4 V forward voltage. Both channels have a 30 deg typical viewing angle and reverse current of <=10 µA at VR=5 V.

Assembly limits include wave soldering at 240°C max for <=6 s and manual soldering at 300°C for 3 s, with the soldering point more than 2.0 mm from the colloid bottom. Storage guidance specifies <=30°C and <=70% RH, with original-package storage no more than 3 months.

Key Features

Red and blue dual-color common cathode LED
F5 through-hole package, 5.8 x 5.0 x 8.7 x 28 mm
Transparent water-clear colloid lens construction
Red luminous intensity 400-700 mcd at 20 mA
Blue luminous intensity 900-1800 mcd at 20 mA
Red dominant wavelength range 630-640 nm
Blue dominant wavelength range 460-475 nm
30 deg typical viewing angle for both colors
20 mA continuous forward current per color
MSL 2 and RoHS-compliant product specification

Typical Applications

Dual-color status indicators
Panel-mounted signal lamps
Through-hole LED assemblies
Red and blue indication circuits
Common cathode display modules
Equipment front-panel indicators
Visual alarm or mode indicators

Procurement Notes

When requesting a quote for XL-A524SURUBC, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.

Alternatives

TOGIALED

TJ-L5FYTXHTCSLC2R6B-A5

Cross-reference candidate from XINGLIGHT replacement table; validate package, optical/electrical parameters, binning and sourcing requirements before substitution.

Application Verification Recommended

FAQ

What LED configuration does XL-A524SURUBC use?

XL-A524SURUBC is specified as a red/blue dual-color LED with a common cathode configuration. This means the red and blue LED channels share a cathode connection while retaining separate color operation.

What are the optical ratings at 20 mA?

At IF=20 mA and Ta=25°C, the red channel is rated 400-700 mcd with 630-640 nm dominant wavelength. The blue channel is rated 900-1800 mcd with 460-475 nm dominant wavelength.

What soldering limits apply to this through-hole LED?

Wave soldering is limited to 240°C max for no more than 6 seconds. Manual soldering is specified at 300°C for 3 seconds. In both cases, the soldering point must be more than 2.0 mm from the colloid bottom.

What storage conditions are recommended for XL-A524SURUBC?

The recommended storage environment is temperature <=30°C and relative humidity <=70%. Original box storage duration is specified as no more than 3 months.

Technical Review & Sourcing Note

Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.

This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.