Specifications
| Type | Description |
|---|---|
| Part Number | XL-IRM0038A |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Component Type | Sensor |
| Package / Case | Epoxy resin plastic encapsulated semi-circular spherical package, 5.0 x 5.0 x 3.5 mm body, 22 mm pin length |
| Supply Voltage Absolute Maximum | 6.0 V |
| Operating Ambient Temperature | -20°C to +85°C |
| Storage Ambient Temperature | -40°C to +125°C |
| Wave Soldering Condition | 240°C, <=6 s |
| Manual Welding Condition | 300°C, 3 s |
| Working Current | 0.3 min, 0.4 typ, 0.5 max mA |
| Receive Distance | 6 min, 8 typ m |
| Receive Distance | 5 min, 6 typ m |
| Receive Distance | 5 min, 6 typ m |
| Carrier Frequency | 37.9 kHz typ |
| BPF Width | 6 kHz typ |
| Low Level Output Voltage | 250 mV max |
| High Level Output Voltage | 4.5 min, 5.0 max V |
| Output Pulse Width Low | 400 min, 600 typ, 800 max us |
| Output Pulse Width High | 400 min, 640 typ, 800 max us |
| Minimum Pulse Width | 350 us min |
| Minimum Interval | 450 us min |
| Encoding Pause Time | 45 us min |
| Recommended Supply Voltage | 2.7 min, 5.5 max V |
| Recommended Input Frequency | 37.9 kHz typ |
| Recommended Operating Temperature | 25°C typ |
| Receive Distance Grade L1 | 6 min, 8 max m |
| Receive Distance Grade L2 | 10 min, 15 max m |
| Receive Distance Grade L3 | 15 min, 20 max m |
| Working Voltage Grade V1 | 2.5 min, 5.5 max V |
| Working Voltage Grade V2 | 2.7 min, 5.5 max V |
| Working Current Grade I1 | 0.3 min, 0.5 max mA |
| Working Current Grade I2 | 0.4 min, 0.7 max mA |
| Output Logic Compatibility | TTL and CMOS compatible, active low output |
| Internal Optical Element | High-speed high-sensitivity PIN photodiode with low-power high-gain preamplifier IC |
| Shielding | Internal and external dual shielding anti-interference design |
| Dimension Tolerance | ±0.3 mm |
| Packaging | Moisture proof and anti-electrostatic foil bag |
| Reliability Solder Heat Resistance | 260°C ±5°C for <=5 s, 20/20 passed |
| Reliability ESD Test | 4 kV, 20/20 passed |
| Reliability Vibration Test | 10-50 Hz, 1.5 mm amplitude, 30 min, 20/20 passed |
| Reliability High Temperature Storage | 85°C ±2°C for 240 h, 20/20 passed |
| Reliability Low Temperature Storage | -20°C ±2°C for 240 h, 20/20 passed |
| Reliability High Temperature High Humidity Storage | 85°C, 85% RH for 240 h, 20/20 passed |
| Reliability Temperature Cycling | -20°C for 30 s to +85°C for 30 s, 10 cycles, 20/20 passed |
| Pin Bend Test | 2.5 N external force, each pin bent 2 times, 20/20 passed |
| Storage Recommendation | Temperature <=30°C, relative humidity <=70%, use within 3 months in original box |
| Cleaning Limit | Ethanol wipe or soak <=3 min |
| Lead Forming Clearance | >=2 mm from colloid/body |
| ESD Handling Limit | HBM <1000 V, machine discharge mode <100 V |
| Datasheet Status | request_only |
Product Overview
The XL-IRM0038A is a XINGLIGHT infrared remote receiver listed in the LED category. Its internal optical element combines a high-speed, high-sensitivity PIN photodiode with a low-power high-gain preamplifier IC. The output is TTL and CMOS compatible with active-low logic, and the device uses an internal and external dual shielding anti-interference design.
The package is an epoxy resin plastic encapsulated semi-circular spherical body measuring 5.0 x 5.0 x 3.5 mm, with 22 mm pin length and ±0.3 mm dimensional tolerance unless otherwise specified. Recommended operating conditions include a 2.7 to 5.5 V supply range, 37.9 kHz typical input frequency, and 25°C typical operating temperature.
Electrical parameters include 0.3 to 0.5 mA working current at VDD=5 V and Ta=25°C, 250 mV maximum low-level output at 2.0 mA sink current, and 4.5 to 5.0 V high-level output with VCC=5 V. Assembly limits include 240°C wave soldering for up to 6 seconds and 300°C manual welding for 3 seconds.
Key Features
- 37.9 kHz typical carrier frequency
- 6 kHz typical BPF width
- 2.7 to 5.5 V recommended supply range
- 0.4 mA typical working current at 5 V
- TTL and CMOS compatible active-low output
- High-sensitivity PIN photodiode with preamplifier IC
- Internal and external dual shielding design
- 6 to 8 m typical receive distance at 0°
- Epoxy resin semi-circular spherical package
- Moisture proof anti-electrostatic foil bag packaging
Typical Applications
- Infrared remote control receivers
- Consumer remote input modules
- TTL-compatible receiver interfaces
- CMOS-compatible receiver interfaces
- 37.9 kHz IR signal reception
- Active-low digital output sensing
- Low-current infrared receiver circuits
Procurement Notes
When requesting a quote for XL-IRM0038A, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
FAQ
What is the recommended supply voltage for XL-IRM0038A?
The recommended supply voltage range for XL-IRM0038A is 2.7 V minimum to 5.5 V maximum under recommended usage conditions. The absolute maximum supply voltage is 6.0 V at Ta=25°C.
What carrier frequency does XL-IRM0038A use?
XL-IRM0038A has a 37.9 kHz typical carrier frequency at Ta=25°C. The recommended input frequency is also listed as 37.9 kHz typical under recommended usage conditions.
What output logic is supported by XL-IRM0038A?
The output is TTL and CMOS compatible and uses active-low logic. Electrical output limits include 250 mV maximum low-level output at Isink=2.0 mA and 4.5 V minimum to 5.0 V maximum high-level output at VCC=5 V.
What soldering limits apply to XL-IRM0038A?
Wave soldering is specified at 240°C for no more than 6 seconds. Manual welding is specified at 300°C for 3 seconds. A solder heat resistance reliability test used 260°C ±5°C for no more than 5 seconds, with 20/20 passed.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.