Specifications
| Type | Description |
|---|---|
| Part Number | XL815-G |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package Case | DIP4, DIP4-M, SMD4 |
| Current Transfer Ratio | 600-7500 %; IF=1 mA, VCE=2 V |
| Isolation Voltage | 5000 Vrms; 40-60% RH, AC for 1 minute |
| Operating Temperature | -55 to +110 °C; maximum rating |
| Forward Current | 60 mA; Ta=25°C unless otherwise specified |
| Reverse Voltage | 6 V; Ta=25°C unless otherwise specified |
| Peak Forward Current | 1 A; pulse width <=1 us, duty ratio 0.001 |
| Input Power Dissipation | 100 mW; Ta=25°C unless otherwise specified |
| Input Power Dissipation Derating Factor | 5.8 mW/°C; above Ta=100°C |
| Input Thermal Resistance Junction-Ambient | 325 °C/W; Ta=25°C unless otherwise specified |
| Input Thermal Resistance Junction-Case | 200 °C/W; Ta=25°C unless otherwise specified |
| Collector Power Dissipation | 150 mW; Ta=25°C unless otherwise specified |
| Collector Current | 80 mA; Ta=25°C unless otherwise specified |
| Collector-Emitter Voltage | 40 V; Ta=25°C unless otherwise specified |
| Emitter-Collector Voltage | 7 V; Ta=25°C unless otherwise specified |
| Total Power Dissipation | 200 mW; Ta=25°C unless otherwise specified |
| Storage Temperature Range | -55 to +125 °C; maximum rating |
| Soldering Temperature | 260 °C; 10 seconds |
| Forward Voltage | typ 1.2 V, max 1.4 V; IF=20 mA, Ta=25°C |
| Input Reverse Current | max 10 uA; VR=4 V, Ta=25°C |
| Terminal Capacitance | typ 30 pF, max 250 pF; VR=0 V, f=1 kHz, Ta=25°C |
| Collector-Emitter Dark Current | max 1000 nA; VCE=10 V, Ta=25°C |
| Collector-Emitter Breakdown Voltage | min 40 V; IC=0.1 mA, IF=0, Ta=25°C |
| Emitter-Collector Breakdown Voltage | min 7 V; IE=10 uA, IF=0, Ta=25°C |
| Collector-Emitter Saturation Voltage | typ 0.8 V, max 1 V; IF=20 mA, IC=5 mA, Ta=25°C |
| Isolation Resistance | min 5×10^10 ohm; VIO=500 Vdc, 40-60% RH, Ta=25°C |
| Isolation Capacitance | typ 0.6 pF, max 1.0 pF; VIO=0, f=1 MHz, Ta=25°C |
| Cut-off Frequency | typ 6 kHz; VCE=5 V, IC=2 mA, RL=100 ohm, -3 dB |
| Turn-on Time | typ 60 us, max 300 us; VCE=2 V, RL=100 ohm |
| Turn-off Time | typ 53 us, max 250 us; IC=10 mA |
| Molding Compound Flammability | UL 94V-0; mechanical data |
| DIP4 Shipping Quantity | 100 pcs/tube; XL815 package option |
| DIP4-M Shipping Quantity | 100 pcs/tube; XL815M package option |
| SMD4 Shipping Quantity | 2000 pcs/tape and reel; XL815S package option |
| Reflow Preheat Temperature | 150-200 °C; Ts |
| Reflow Preheat Time | 60-120 s; ts |
| Reflow Ramp-up Rate | max 3 °C/s; TL to TP |
| Reflow Liquidus Temperature | 217 °C; TL |
| Reflow Time Above Liquidus | 60-150 s; tL |
| Reflow Peak Temperature | 260 °C; Tp |
| Hand Soldering Temperature | 360 °C +5°C within 3 s; product rework or sample testing |
| Datasheet Status | request_only |
Product Overview
The XL815-G is a XINGLIGHT Photo Darlington optocoupler in the LED category. Its input side is specified with 60 mA forward current, 6 V reverse voltage, 100 mW input power dissipation, and 325 °C/W junction-to-ambient thermal resistance. The output side is specified for 80 mA collector current, 40 V collector-emitter voltage, and 150 mW collector power dissipation.
Key Features
- 600-7500 % current transfer ratio at IF=1 mA
- 5000 Vrms isolation voltage for one minute
- -55 to +110 °C operating temperature range
- 60 mA maximum forward current rating
- 80 mA collector current rating
- 40 V collector-emitter voltage rating
- Typical 6 kHz cut-off frequency
- Typical 60 us turn-on time
- Typical 53 us turn-off time
- UL 94V-0 molding compound flammability
- DIP4, DIP4-M, and SMD4 package options
- 260 °C peak reflow temperature profile
Typical Applications
- Isolated signal transfer
- Input-output electrical isolation
- Low-frequency switching interfaces
- Darlington optocoupler output stages
- Control circuit isolation
- SMD4 tape-and-reel assembly
- DIP4 tube-based assembly
Procurement Notes
When requesting a quote for XL815-G, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
XL815M Photo Darlington: 5kV Isolation for SMPS Feedback Loops
The XL815M is a high-isolation Photo Darlington transistor designed for critical feedback and signal isolation in switching power supplies. This technical brief provides enginee...
XL815 Photo Darlington: Isolation & Feedback Control for Power Systems
The XL815 is a high-isolation Photo Darlington transistor designed for feedback loops in switching power supplies and circuit isolation. This article provides a concise engineer...
FAQ
What type of device is the XL815-G?
The XL815-G is a XINGLIGHT Photo Darlington optocoupler in the LED category. The extracted datasheet facts list package support for DIP4, DIP4-M, and SMD4.
What isolation rating is specified for XL815-G?
The datasheet extraction specifies 5000 Vrms isolation voltage under 40-60% RH with AC applied for 1 minute. Isolation resistance is listed as a minimum of 5×10^10 ohm at VIO=500 Vdc.
What switching times are listed for XL815-G?
The listed turn-on time is typ 60 us and max 300 us at VCE=2 V with RL=100 ohm. Turn-off time is typ 53 us and max 250 us at IC=10 mA.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.