Specifications
| Type | Description |
|---|---|
| Part Number | CC2652P |
| Manufacturer | Texas Instruments |
| Product Type | Multiprotocol 2.4 GHz wireless MCU |
| Category | Microcontroller |
| Package / Case | RGZ VQFN48, 7.00 mm × 7.00 mm, 0.5 mm pitch |
| Component Type | MCU |
| CPU Core | Arm Cortex-M4F; Main system CPU |
| CPU Frequency | 48 MHz; Main CPU |
| CoreMark Score | 148; EEMBC CoreMark |
| Flash Memory | 352 kB; In-system programmable flash |
| ROM | 256 kB; Protocols and library functions |
| Cache SRAM | 8 kB; Alternatively available as general-purpose RAM |
| SRAM | 80 kB; Ultra-low leakage SRAM with parity protection |
| Sensor Controller SRAM | 4 kB; Ultra-low power sensor controller |
| GPIO Count | 26 GPIOs; RGZ VQFN48 package |
| Active RX Current | 6.9 mA; Active mode RX |
| Transmit Current | 7.3 mA; Active mode TX, 0 dBm |
| Transmit Current | 9.6 mA; Active mode TX, 5 dBm |
| Transmit Current | 22 mA; Active mode TX, +10 dBm |
| Transmit Current | 85 mA; Active mode TX, +20 dBm |
| MCU Active Current | 3.4 mA, 71 µA/MHz; Active mode MCU, 48 MHz, CoreMark |
| Sensor Controller Low-Power Current | 30.1 µA; Low-power mode, 2 MHz, running infinite loop |
| Sensor Controller Active Current | 808 µA; Active mode, 24 MHz, running infinite loop |
| Standby Current | 0.94 µA; RTC on, 80 kB RAM and CPU retention |
| Shutdown Current | 150 nA; Wakeup on external events |
| RF Frequency Band | 2.4 GHz; RF transceiver |
| Bluetooth Support | Bluetooth 5.2 Low Energy and earlier LE specifications; 2.4 GHz RF transceiver |
| IEEE 802.15.4 Support | IEEE 802.15.4 PHY and MAC; 2.4 GHz RF transceiver |
| Receiver Sensitivity | -100 dBm; IEEE 802.15.4, 2.4 GHz |
| Receiver Sensitivity | -105 dBm; Bluetooth 125 kbps LE Coded PHY |
| Maximum Output Power | +20 dBm; With temperature compensation |
| ADC Resolution | 12-bit; ADC peripheral |
| ADC Sample Rate | 200 kSamples/s; ADC peripheral |
| ADC Channels | 8 channels; ADC peripheral |
| General-Purpose Timers | 4 × 32-bit or 8 × 16-bit; Timer peripherals |
| UART Interfaces | 2; Serial peripherals |
| SSI Interfaces | 2; Supports SPI, MICROWIRE, TI modes |
| Cryptographic Acceleration | AES 128-bit and 256-bit, ECC, RSA, SHA2 up to SHA-512, TRNG; Security hardware peripherals |
| Package Orderable Part Number | CC2652P1FRGZ; Device information table |
| Package Type | VQFN, 48 pins; Device information table |
| Supported Protocols | Thread, Zigbee, Bluetooth 5.2 Low Energy, IEEE 802.15.4, 6LoWPAN, proprietary, SimpleLink TI 15.4 stack, DMM; Wireless protocol support |
| Operating Band Applications | 2400 MHz to 2480 MHz ISM and SRD systems; Applications list |
| Datasheet Status | request_only |
Product Overview
The CC2652P is a Texas Instruments multiprotocol 2.4 GHz wireless MCU in the Microcontroller category. Its main system CPU is an Arm Cortex-M4F operating at 48 MHz, with an EEMBC CoreMark score of 148. On-chip memory includes 352 kB of in-system programmable flash, 256 kB ROM for protocols and library functions, 80 kB ultra-low leakage SRAM with parity protection, 8 kB cache SRAM that can alternatively be used as general-purpose RAM, and 4 kB SRAM for the ultra-low power sensor controller.
The RF subsystem operates in the 2.4 GHz band and supports Bluetooth 5.2 Low Energy and earlier LE specifications, IEEE 802.15.4 PHY and MAC, Thread, Zigbee, 6LoWPAN, proprietary operation, SimpleLink TI 15.4 stack, and DMM. Receiver sensitivity is specified as -100 dBm for IEEE 802.15.4 at 2.4 GHz and -105 dBm for Bluetooth 125 kbps LE Coded PHY, with maximum output power of +20 dBm using temperature compensation.
For assembly, the documented package is RGZ VQFN48, 7.00 mm × 7.00 mm, 0.5 mm pitch; the device information table lists CC2652P1FRGZ as the orderable part number and VQFN with 48 pins. Peripheral resources include 26 GPIOs in the RGZ package, a 12-bit 200 kSamples/s ADC with 8 channels, timer, UART, SSI, and security acceleration blocks.
Key Features
- Arm Cortex-M4F main CPU operating at 48 MHz
- 352 kB in-system programmable flash memory
- 256 kB ROM for protocols and library functions
- 80 kB ultra-low leakage SRAM with parity protection
- 2.4 GHz RF transceiver with Bluetooth 5.2 LE support
- IEEE 802.15.4 PHY and MAC support
- Maximum +20 dBm output power with temperature compensation
- 12-bit ADC with 200 kSamples/s sample rate
- Two UART interfaces and two SSI interfaces
- Hardware acceleration for AES, ECC, RSA, SHA2, and TRNG
Typical Applications
- Thread wireless devices
- Zigbee network nodes
- Bluetooth 5.2 Low Energy systems
- IEEE 802.15.4 products
- 6LoWPAN connected devices
- Proprietary 2.4 GHz wireless systems
- SimpleLink TI 15.4 stack designs
- 2400 MHz to 2480 MHz ISM systems
Procurement Notes
When requesting a quote for CC2652P, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For MCU, processor and logic IC sourcing, package, operating voltage, temperature grade, speed or frequency grade, firmware or mask version, lifecycle status and programming requirements should be checked before approval.
FAQ
What type of device is the CC2652P?
The CC2652P is a Texas Instruments multiprotocol 2.4 GHz wireless MCU in the Microcontroller category. It integrates an Arm Cortex-M4F main system CPU, on-chip memory, RF transceiver functions, mixed-signal peripherals, and security acceleration hardware.
Which wireless protocols are supported by CC2652P?
The extracted datasheet facts list support for Thread, Zigbee, Bluetooth 5.2 Low Energy, IEEE 802.15.4, 6LoWPAN, proprietary operation, SimpleLink TI 15.4 stack, and DMM through the 2.4 GHz wireless platform.
What memory resources are specified for CC2652P?
The device includes 352 kB in-system programmable flash, 256 kB ROM for protocols and library functions, 80 kB ultra-low leakage SRAM with parity protection, 8 kB cache SRAM, and 4 kB sensor controller SRAM.
What package information is provided for CC2652P?
The package case is RGZ VQFN48, measuring 7.00 mm × 7.00 mm with 0.5 mm pitch. The device information table lists orderable part number CC2652P1FRGZ and package type VQFN with 48 pins.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.