XL-0201SURC High Brightness Red SMD LED

Specifications

Product Overview

XINGLIGHT XL-0201SURC is a high brightness red SMD LED supplied in an 0201 package with 0.65 x 0.35 x 0.4 mm L/W/H dimensions. The device is specified with transparent colloid appearance and a moisture sensitivity level of MSL 3.

At IF=20 mA and Ta=25°C, the LED is rated for 120 to 240 mcd luminous intensity, 615 to 630 nm dominant wavelength, typ 625 nm peak wavelength, typ 20 nm half wave width, and typ 120° viewing angle. Forward voltage is specified from 1.7 to 2.3 V, with reverse current limited to max 1 µA at VR=5 V.

Absolute maximum ratings include 50 mW power dissipation, 20 mA continuous forward current, 60 mA peak forward current for pulse width ≤0.1 ms and duty ≤1/10, 5 V reverse voltage, and 2000 V ESD rating at Ta=25°C. Assembly guidance includes 260°C lead soldering for ≤6 s, recommended maximum welding at 240±5°C for 6 s, and a maximum of two reflow soldering cycles.

Key Features

• 0201 SMD LED package, 0.65 x 0.35 x 0.4 mm
• High brightness red output with transparent colloid appearance
• 120 to 240 mcd luminous intensity at 20 mA
• 615 to 630 nm dominant wavelength range
• Typ 625 nm peak wavelength at 20 mA
• 1.7 to 2.3 V forward voltage range
• Typ 120° viewing angle for wide indication coverage
• 20 mA maximum continuous forward current rating
• 60 mA peak forward current under specified pulse conditions
• MSL 3 moisture sensitivity classification
• 2000 V ESD rating at Ta=25°C
• Maximum two reflow soldering cycles

Typical Applications

• Compact red status indicators
• Space-constrained PCB indicators
• Portable device signal lights
• Backlighting points requiring red emission
• Panel and keypad indication
• Low-profile electronic assemblies
• Repair or rework with controlled hand soldering

Procurement Notes

When requesting a quote for XL-0201SURC, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.