Specifications
| Type | Description |
|---|---|
| Part Number | XL-2106PDC |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Inferred Category | LED |
| Component Type | Sensor |
| Package / Case | 0802 SMD, 2.1 x 0.55 x 1.0 mm |
| Outline Dimensions | 2.1 x 0.55 x 1.0 mm, L/W/H |
| Colloid | black colloid |
| RoHS Compliance | complies with RoHS directive, environmental protection process |
| Moisture Sensitivity Level | MSL 3 |
| Collector-Emitter Voltage | 30 V, absolute maximum rating, Ta=25°C |
| Emitter-Collector Voltage | 5 V, absolute maximum rating, Ta=25°C |
| ESD / Antistatic Ability | 2000 V, absolute maximum rating, Ta=25°C |
| Operating Temperature Range | -40 to +85 °C, Ta=25°C absolute maximum rating table |
| Storage Temperature Range | -40 to +85 °C, Ta=25°C absolute maximum rating table |
| Reflow Soldering Condition | 260°C, 6 s, absolute maximum soldering condition |
| Manual Soldering Condition | 300°C, 3 s, absolute maximum soldering condition |
| Collector-Emitter Breakdown Voltage | min 85 V, ICEO=100 µA, Ee=0 mW/cm², Ta=25°C |
| Emitter-Collector Breakdown Voltage | min 8.2 V, IECO=10 µA, Ee=0 mW/m², Ta=25°C |
| Collector-Base Breakdown Voltage | min 85 V, ICBO=100 µA, Ee=0 mW/cm², Ta=25°C |
| Collector Dark Current | max 30 nA, VCE=20 V, Ee=0 mW/cm², Ta=25°C |
| Collector-Emitter Saturation Voltage | max 0.3 V, IC=2 mA, IB=100 µA, Ee=1 mW/cm², Ta=25°C |
| Peak Sensitive Wavelength | 880 nm, Ta=25°C |
| Current Amplification Factor | 200 to 2300, VCE=5 V, IC=2 A, Ta=25°C |
| Photocurrent 1 | 300 to 400 µA, Ee=1 mW/cm², λp=850 nm, VCE=5 V, Ta=25°C |
| Photocurrent 2 | 500 to 600 µA, Ee=1 mW/cm², λp=940 nm, VCE=5 V, Ta=25°C |
| Spectral Bandwidth / Spectral Range | 700 to 1100 nm, Ta=25°C |
| Rise Time | 15 µs, VCE=5 V, IC=1 mA, RL=1000 Ω, Ta=25°C |
| Fall Time | 15 µs, VCE=5 V, IC=1 mA, RL=1000 Ω, Ta=25°C |
| Pin Configuration | collector, base, emitter, outline drawing |
| Dimension Tolerance | ±0.25 mm, unless otherwise noted |
| Tape/Reel Dimensional Tolerance | ±0.1 mm, belt and disk dimensions |
| Recommended Maximum Welding Temperature | 240±5°C for 6 s, reflow soldering guideline |
| Maximum Reflow Cycles | 2 times, reflow soldering guideline |
| Unopened Storage Condition | ≤30°C, ≤60% RH, use within 1 year, before opening package |
| Opened Storage Condition | ≤30°C, ≤40% RH, solder within 168 hours / 7 days, after opening package |
| Baking Condition | 60±5°C for 24 hours, if moisture absorbent material has faded or storage time exceeded |
| Datasheet Status | request_only |
Product Overview
Electrical data covers both absolute maximum ratings and optoelectronic characteristics. The device is rated for 30 V collector-emitter voltage, 5 V emitter-collector voltage, and 2000 V ESD / antistatic ability at Ta=25°C. Optical response is specified with an 880 nm peak sensitive wavelength, 700 to 1100 nm spectral range, and photocurrent ranges measured at 850 nm and 940 nm.
Key Features
- 0802 SMD package, 2.1 x 0.55 x 1.0 mm
- Black colloid phototransistor infrared receiver construction
- 700 to 1100 nm spectral response range
- 880 nm peak sensitive wavelength at Ta=25°C
- 300 to 400 µA photocurrent at 850 nm
- 500 to 600 µA photocurrent at 940 nm
- 15 µs rise time under specified test conditions
- 15 µs fall time under specified test conditions
- Collector, base and emitter pin configuration
- MSL 3 moisture sensitivity level
- RoHS directive compliance stated in datasheet
Typical Applications
- Infrared receiver circuits
- 850 nm optical detection
- 940 nm optical detection
- Compact SMD optical sensing
- Phototransistor sensor inputs
- Infrared presence sensing
- Optical switching circuits
Procurement Notes
When requesting a quote for XL-2106PDC, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
FAQ
What type of component is XL-2106PDC?
XL-2106PDC is identified as a XINGLIGHT phototransistor infrared receiver in the LED category. The extracted datasheet facts also classify it as a sensor and specify an 0802 SMD package.
What wavelength range does XL-2106PDC detect?
The datasheet facts specify a spectral range of 700 to 1100 nm at Ta=25°C. Peak sensitive wavelength is listed as 880 nm, with photocurrent data provided at 850 nm and 940 nm.
What package size is used for XL-2106PDC?
XL-2106PDC uses an 0802 SMD package. The outline dimensions are 2.1 x 0.55 x 1.0 mm for length, width and height, with ±0.25 mm dimension tolerance unless otherwise noted.
What storage limits apply after opening the package?
After opening the package, the storage condition is ≤30°C and ≤40% RH. The extracted datasheet facts state that parts should be soldered within 168 hours, or 7 days.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.