Specifications
| Type | Description |
|---|---|
| Part Number | XL-4543PDC |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 4.8 x 4.4 x 8.7 x 1.5 mm infrared receiver tube, black colloid |
| Appearance Dimension | 4.8 x 4.4 x 8.7 x 1.5 mm; package outline |
| Luminous Color and Colloid | Infrared receiver tube / black colloid; product characteristic |
| RoHS Compliance | Complies with RoHS Directive; environmental protection products |
| Moisture Sensitivity Level | MSL 3 |
| Collector-Emitter Voltage | 30 V max; maximum rating |
| Emitter-Collector Voltage | 5 V max; maximum rating |
| Operating Ambient Temperature | -20°C to +85°C; maximum rating |
| Storage Ambient Temperature | -40°C to +85°C; maximum rating |
| Reflow Soldering Condition | 260°C, 6 s; welding condition maximum rating |
| Manual Soldering Condition | 300°C, 3 s; welding condition maximum rating |
| Pulse Width | ≤0.1 ms; note for ratings |
| Duty Cycle | ≤1/10; note for ratings |
| Reverse Voltage | 30 V min; Ir=100 uA, Ta=25°C |
| Forward Voltage | 0.7 V min, 5 V max; Ir=10 mA, Ta=25°C |
| Light Current | 25 uA min, 35 uA typ, 45 uA max; VR=5 V, E=1.0 mW/cm², λ=940 nm, Ta=25°C |
| Dark Current | 30 nA max; VR=10 V, E=0 mW/cm², Ta=25°C |
| Short Circuit Current | 25 uA min, 35 uA typ, 45 uA max; Vr=0 V, E=10 mW/cm², λ=940 nm, Ta=25°C |
| Range of Spectral Bandwidth | 700 nm min, 1100 nm max; Ta=25°C |
| Peak Wavelength | 940 nm typ; Ta=25°C |
| Rise Time | 30 ns typ; VCE=5 V, Ic=1 mA, RL=1 kΩ, Ta=25°C |
| Fall Time | 30 ns typ; VCE=5 V, Ic=1 mA, RL=1 kΩ, Ta=25°C |
| Collector-Base Capacitance | 30 pF typ; f=1 MHz, CCB=3 V, Ta=25°C |
| View Angle | ±60° typ; Vr=5 V, E=1.0 mW/cm², λ=940 nm, Ta=25°C |
| Dimension Tolerance | ±0.25 mm; unless otherwise mentioned |
| Packaging Dimensional Tolerance | ±0.1 mm; belt and disk dimensions |
| Recommended Manual Soldering Iron Power | <30 W; hand soldering |
| Recommended Maximum Welding Temperature | 240±5°C for 6 s; product recommended maximum welding temperature |
| Maximum Reflow Soldering Cycles | 2 times; reflow soldering |
| Datasheet Status | request_only |
Product Overview
The XL-4543PDC is a XINGLIGHT infrared receiver phototransistor in the LED category. Its package outline is specified as 4.8 x 4.4 x 8.7 x 1.5 mm, using an infrared receiver tube structure with black colloid. The package drawing notes a general dimension tolerance of ±0.25 mm, while belt and disk packaging dimensions use ±0.1 mm tolerance.
Optical and electrical parameters are centered on 940 nm infrared reception. At Ta=25°C, the device has a 700 nm to 1100 nm spectral bandwidth, 940 nm typical peak wavelength, and ±60° typical view angle. Light current is 25 uA minimum, 35 uA typical, and 45 uA maximum at VR=5 V, E=1.0 mW/cm², and λ=940 nm. Dark current is specified at 30 nA maximum with VR=10 V and E=0 mW/cm².
For circuit and assembly planning, maximum ratings include 30 V collector-emitter voltage, 5 V emitter-collector voltage, -20°C to +85°C operating temperature, and -40°C to +85°C storage temperature. The datasheet also specifies MSL 3 handling, RoHS compliance, 260°C for 6 s reflow maximum rating, 300°C for 3 s manual soldering maximum rating, and a recommended 240±5°C for 6 s maximum welding temperature.
Key Features
- Infrared receiver phototransistor in black colloid package
- 4.8 x 4.4 x 8.7 x 1.5 mm outline
- RoHS compliant environmental protection product
- MSL 3 moisture sensitivity level
- 940 nm typical peak wavelength response
- 700 nm to 1100 nm spectral bandwidth
- 25 uA to 45 uA light current range
- 30 nA maximum dark current at VR=10 V
- 30 ns typical rise and fall times
- ±60° typical infrared view angle
Typical Applications
- 940 nm infrared signal reception
- Infrared sensing over 700-1100 nm
- Wide-angle infrared receiver layouts
- Low-dark-current detection circuits
- Short-pulse infrared detection circuits
- Reflow-assembled infrared sensor boards
Procurement Notes
When requesting a quote for XL-4543PDC, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
FAQ
What type of device is the XL-4543PDC?
The XL-4543PDC is an XINGLIGHT infrared receiver phototransistor in the LED category. The datasheet describes it as an infrared receiver tube with black colloid and a 4.8 x 4.4 x 8.7 x 1.5 mm package outline.
What wavelength range does XL-4543PDC support?
At Ta=25°C, the specified spectral bandwidth spans 700 nm minimum to 1100 nm maximum. The typical peak wavelength is 940 nm, matching the test conditions used for light current, short circuit current, and view angle.
What are the main soldering limits for XL-4543PDC?
The maximum rating lists reflow soldering at 260°C for 6 s and manual soldering at 300°C for 3 s. The recommended maximum welding temperature is 240±5°C for 6 s, with reflow limited to 2 cycles.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.