Specifications
| Type | Description |
|---|---|
| Part Number | XL-2835WWC-02XL-2835WWC-02 |
| Manufacturer | XINGLIGHT |
| Product Type | Warm white SMD LED |
| Category | LED |
| Datasheet Part Number | XL-2835WWC-02 |
| Outline Dimensions | 2.8 x 3.5 x 0.8 mm |
| Luminous Color | White light |
| Moisture Sensitivity Level | MSL 3 |
| Maximum Power Dissipation | 200 mW |
| Maximum Continuous Forward Current | 60 mA |
| Peak Forward Current | 150 mA |
| Maximum Reverse Voltage | 5 V |
| ESD Rating | 2000 V |
| Operating Temperature Range | -40 to +85°C |
| Storage Temperature Range | -40 to +85°C |
| Lead Soldering Temperature/Time | 260°C <=6 s |
| Luminous Flux | 20-33 lm |
| Color Temperature | 2800-3200 K |
| Forward Voltage | 2.8-3.4 V |
| Color Rendering Index | Ra min 70 |
| Viewing Angle | 120 deg typ |
| Reverse Current | 5 uA max |
| Brightness Bin J1 | 20-23 lm |
| Brightness Bin J2 | 23-27 lm |
| Brightness Bin J3 | 27-33 lm |
| Voltage Bin N13-3 | 2.8-3.0 V |
| Voltage Bin N13-4 | 3.0-3.2 V |
| Voltage Bin N13-5 | 3.2-3.4 V |
| Color Temperature Bin WW2-4 | 2800-3000 K |
| Color Temperature Bin WW4-4 | 3000-3200 K |
| Default Test Environment Temperature | 25±5°C |
| Hand Soldering Iron Power | <30 W |
| Hand Soldering Temperature | <300°C |
| Reflow Soldering Cycles | Maximum 2 times |
| Recommended Maximum Welding Temperature | 240±5°C for 6 s |
| Storage Before Opening | <=30°C, <60% RH, use within 1 year |
| Storage After Opening | <=30°C, <10% RH, solder within 168 hours |
| Recommended Workshop Condition | <=30°C, <60% RH |
| Baking Condition | 60±5°C for 24 hours |
| Datasheet Status | request_only |
Product Overview
XL-2835WWC-02 is a XINGLIGHT warm white SMD LED. The manufacturer datasheet lists the base technical datasheet part number as XL-2835WWC-02 and defines an SMD 2835 outline with 2.8 x 3.5 x 0.8 mm dimensions.
At IF=60 mA and Ta=25°C, the LED is specified for 20-33 lm luminous flux, 2800-3200 K color temperature, 2.8-3.4 V forward voltage, Ra 70 minimum color rendering index, and 120 degree typical viewing angle. Absolute maximum ratings include 200 mW power dissipation, 60 mA continuous forward current, 150 mA peak forward current under the stated pulse condition, and 5 V maximum reverse voltage.
Assembly and storage controls are part of the datasheet requirements. The device is rated MSL 3, supports a maximum of two reflow soldering cycles, and has a recommended maximum welding temperature of 240±5°C for 6 seconds. After package opening, storage is limited to <=30°C and <10% RH with soldering within 168 hours.
Key Features
- SMD 2835 package, 2.8 x 3.5 x 0.8 mm
- White light output with yellow colloid construction
- 20-33 lm luminous flux at IF=60 mA
- 2800-3200 K warm white color temperature range
- 2.8-3.4 V forward voltage at IF=60 mA
- Ra 70 minimum color rendering index
- 120 degree typical viewing angle
- MSL 3 moisture sensitivity level
- 60 mA maximum continuous forward current
- 2000 V ESD rating at Ta=25°C
Typical Applications
- Warm white LED lighting
- SMD indicator lighting
- Backlighting assemblies
- Compact lighting modules
- Low-profile electronic illumination
- Warm white display accents
FAQ
What package is used for this XINGLIGHT LED?
The datasheet identifies an SMD 2835 package with outline dimensions of 2.8 x 3.5 x 0.8 mm. This package information comes from the manufacturer technical datasheet.
What are the optical ratings at IF=60 mA?
At IF=60 mA and Ta=25°C, the datasheet specifies 20-33 lm luminous flux, 2800-3200 K color temperature, Ra 70 minimum color rendering index, and a 120 degree typical viewing angle.
What forward voltage range is specified?
The forward voltage range is 2.8-3.4 V at IF=60 mA and Ta=25°C. The datasheet also lists voltage bins N13-3, N13-4, and N13-5 covering 2.8-3.4 V.
What soldering limits are listed in the datasheet?
The datasheet lists lead soldering at 260°C for <=6 seconds, hand soldering below 300°C for less than 3 seconds per terminal, and a recommended maximum welding temperature of 240±5°C for 6 seconds.
What storage handling is required after opening?
After opening the package, the datasheet specifies storage at <=30°C and <10% RH, with soldering within 168 hours. If required by the stated condition, baking is specified at 60±5°C for 24 hours.