XL-2835SURC-02 Red SMD LED

Specifications

Product Overview

XL-2835SURC-02 is a XINGLIGHT red SMD LED supplied in an SMD 2835 package. The package outline is 2.8 x 3.5 x 0.8 mm, with red light output and transparent colloid. It is identified as RoHS-compliant and has a moisture sensitivity level of MSL 3.

At Ta=25°C, the LED is rated for 200 mW maximum power dissipation, 60 mA maximum continuous forward current, 150 mA peak forward current under pulsed conditions, and 5 V maximum reverse voltage. At IF=60 mA and Ta=25°C, the datasheet lists 550-900 mcd luminous intensity, 620-630 nm dominant wavelength, 625 nm typical peak wavelength, 1.8-2.4 V forward voltage, 120° typical viewing angle, and 20 nm typical half wave width.

Assembly guidance includes lead soldering at 260°C for no more than 6 s, hand soldering below 300°C with less than 30 W iron power, no more than two reflow cycles, and a recommended maximum welding temperature of 240±5°C for 6 s. The part is suitable for red visual indication, PCB-mounted indicators, status panels, and signal display positions where these electrical, optical, and storage limits fit the design.

Key Features

• Red SMD LED with transparent colloid
• SMD 2835 package, 2.8 x 3.5 x 0.8 mm
• 550-900 mcd luminous intensity at IF=60 mA
• 620-630 nm dominant wavelength at IF=60 mA
• 1.8-2.4 V forward voltage at IF=60 mA
• 120° typical viewing angle at IF=60 mA
• 60 mA maximum continuous forward current at Ta=25°C
• 200 mW maximum power dissipation at Ta=25°C
• RoHS compliant according to the extracted datasheet facts
• MSL 3 moisture sensitivity level

Typical Applications

• Red PCB status indicators
• Panel indicator lamps
• Signal display positions
• Equipment visual alerts
• Backlit legends using red LEDs
• General red indication circuits

Procurement Notes

When requesting a quote for XL-2835SURC-02, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.