Specifications
| Type | Description |
|---|---|
| Part Number | XL-304UGC |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | F3 / 3.8 x 3.0 x 5.2 x 28 mm through-hole LED |
| Appearance Dimension | F3 / 3.8 x 3.0 x 5.2 x 28 mm |
| Luminous Color | Green; white/water colloid body |
| Moisture Sensitivity Level | MSL 2 |
| RoHS Compliance | Meets RoHS requirements; environmental protection product |
| Power Dissipation | 70 mW at Ta=25°C |
| Maximum Continuous Forward Current | 20 mA at Ta=25°C |
| Peak Forward Current | 80 mA at Ta=25°C |
| Operating Ambient Temperature | -20°C to +85°C |
| Storage Ambient Temperature | -40°C to +85°C |
| Wave Soldering Temperature | 240°C max, <=6 s; solder point more than 2.0 mm from colloid bottom |
| Manual Welding Temperature | 300°C, 3 s; solder point more than 2.0 mm from colloid bottom |
| Luminous Intensity | 8000 min, 10000 typ, 12000 max mcd at IF=20mA, Ta=25°C |
| Dominant Wavelength | 515 min, 530 max nm at IF=20mA, Ta=25°C |
| Peak Wavelength | 525 typ nm at IF=20mA, Ta=25°C |
| Forward Voltage | 2.8 min, 3.0 typ, 3.4 max V at IF=20mA, Ta=25°C |
| Viewing Angle | 30 typ deg at IF=20mA, Ta=25°C, 2θ1/2 |
| Spectral Width at Half Height | 30 typ nm at IF=20mA, Ta=25°C |
| Reverse Current | <=10 uA at VR=5V, Ta=25°C |
| Luminous Intensity Tolerance | ±10% |
| Forward Voltage Tolerance | ±0.1 V |
| Chromaticity Coordinate Tolerance | ±0.01 for X,Y coordinates |
| Wavelength Tolerance | ±1 nm for monochromatic wavelength |
| Brightness Grade C1 | 8000 to 10000 mcd at IF=20mA |
| Brightness Grade C2 | 10000 to 12000 mcd at IF=20mA |
| Voltage Grade N13-3 | 2.8 to 3.0 V at IF=20mA |
| Voltage Grade N13-4 | 3.0 to 3.2 V at IF=20mA |
| Voltage Grade N13-5 | 3.2 to 3.4 V at IF=20mA |
| Wavelength Grade HG02 | 515 to 520 nm at IF=20mA |
| Wavelength Grade HG03 | 520 to 525 nm at IF=20mA |
| Wavelength Grade HG04 | 525 to 530 nm at IF=20mA |
| Outline Dimension Tolerance | ±0.50 mm unless otherwise specified |
| Storage Before Use | Temperature <=30°C, relative humidity <=70%, recommended use within 3 months in original box; for longer storage, use drying box with desiccant or nitrogen |
| Electrostatic Protection | HBM <1000 V, machine discharge mode <100 V; use antistatic devices for InGaN series products |
| Packaging | Bags; moisture proof and anti-electrostatic foil bag |
| Datasheet Status | request_only |
Product Overview
XL-304UGC is a XINGLIGHT green through-hole indicator LED with an F3 / 3.8 x 3.0 x 5.2 x 28 mm appearance dimension. The device uses a white/water colloid body and is supplied as an environmental protection product that meets RoHS requirements. It is categorized as an LED and identified as a green through-hole indicator LED.
At IF=20mA and Ta=25°C, the datasheet specifies luminous intensity from 8000 to 12000 mcd, with 10000 mcd typical. The dominant wavelength range is 515 to 530 nm, the peak wavelength is 525 nm typical, forward voltage is 2.8 to 3.4 V, and the typical viewing angle is 30° at 2θ1/2. Reverse current is specified at <=10 uA with VR=5V.
Assembly limits include wave soldering at 240°C maximum for <=6 s and manual welding at 300°C for 3 s, both with the solder point more than 2.0 mm from the colloid bottom. Operating ambient temperature is -20°C to +85°C, storage ambient temperature is -40°C to +85°C, and storage before use is recommended within 3 months in the original box at <=30°C and <=70% relative humidity.
Key Features
- Green through-hole indicator LED in F3 package
- 3.8 x 3.0 x 5.2 x 28 mm appearance dimension
- 8000 to 12000 mcd luminous intensity at 20 mA
- 515 to 530 nm dominant wavelength range
- 525 nm typical peak wavelength at 20 mA
- 2.8 to 3.4 V forward voltage range
- 30 degree typical viewing angle at 2θ1/2
- 20 mA maximum continuous forward current
- MSL 2 moisture sensitivity level
- Moisture proof anti-electrostatic foil bag packaging
Typical Applications
- Panel status indicators
- Green signal indication
- Through-hole PCB assemblies
- Equipment status displays
- Control panel indicators
- Visual operating-state indication
Procurement Notes
When requesting a quote for XL-304UGC, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Alternatives
EVERLIGHT
204-10SUGC/S400-A5-L
Cross-reference candidate from XINGLIGHT replacement table; validate package, optical/electrical parameters, binning and sourcing requirements before substitution.
Application Verification Recommended
Related Technical Articles
FAQ
What type of LED is XL-304UGC?
XL-304UGC is a XINGLIGHT green through-hole indicator LED. The datasheet identifies its appearance dimension as F3 / 3.8 x 3.0 x 5.2 x 28 mm and lists the luminous color as green with a white/water colloid body.
What are the main optical specifications at 20 mA?
At IF=20mA and Ta=25°C, XL-304UGC is specified for 8000 to 12000 mcd luminous intensity, 515 to 530 nm dominant wavelength, 525 nm typical peak wavelength, 30 nm typical spectral width, and a 30° typical viewing angle.
What soldering limits apply to this through-hole LED?
Wave soldering is specified at 240°C maximum for <=6 s, while manual welding is specified at 300°C for 3 s. In both cases, the solder point must be more than 2.0 mm from the colloid bottom.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.