Specifications
| Type | Description |
|---|---|
| Part Number | XL-IRM0038M |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | Epoxy resin plastic encapsulated straw-hat / semi-spherical package, Ø5.0 x 6.0 x 22 mm |
| Supply Voltage Absolute Maximum | 6.0 V; Ta=25°C |
| Operating Ambient Temperature | -20°C to +85°C; absolute maximum rating, Ta=25°C |
| Storage Ambient Temperature | -40°C to +125°C; absolute maximum rating, Ta=25°C |
| Wave Soldering Condition | 240°C, ≤6 s; welding condition |
| Manual Soldering Condition | 300°C, 3 s; welding condition |
| Working Current | Min 0.3 mA, Typ 0.4 mA, Max 0.5 mA; VDD=5 V, Ta=25°C |
| Receive Distance at 0° | Min 6 m, Typ 8 m; Ta=25°C |
| Receive Distance at Left 35° | Min 5 m, Typ 6 m; Ta=25°C |
| Receive Distance at Right 35° | Min 5 m, Typ 6 m; Ta=25°C |
| Carrier Frequency | Typ 37.9 kHz; Ta=25°C |
| BPF Width | Typ 6 kHz; Ta=25°C |
| Low Level Output Voltage | Max 250 mV; Isink=2.0 mA, Ta=25°C |
| High Level Output Voltage | Min 4.5 V, Max 5.0 V; VCC=5 V, Ta=25°C |
| Output Pulse Width Low | Min 400 µs, Typ 600 µs, Max 800 µs; burst wave, Vin=500 µVp-p |
| Output Pulse Width High | Min 400 µs, Typ 640 µs, Max 800 µs; burst wave, Vin=50 mVp-p |
| Minimum Pulse Width | Min 350 µs; Vin=50 mVp-p |
| Minimum Interval | Min 450 µs; Vin=50 mVp-p |
| Encoding Pause Time | Min 45 µs; Vin=50 mVp-p |
| Recommended Supply Voltage | Min 2.7 V, Max 5.5 V; recommended usage condition |
| Recommended Input Frequency | Typ 37.9 kHz; recommended usage condition |
| Recommended Operating Temperature | Typ 25°C; recommended usage condition |
| Receive Distance Grade L1 | Min 6 m, Max 8 m; ICC=0.5 mA |
| Receive Distance Grade L2 | Min 10 m, Max 15 m; ICC=0.5 mA |
| Receive Distance Grade L3 | Min 15 m, Max 20 m; ICC=0.5 mA |
| Working Voltage Grade V1 | Min 2.5 V, Max 5.5 V; ICC=0.5 mA |
| Working Voltage Grade V2 | Min 2.7 V, Max 5.5 V; ICC=0.5 mA |
| Working Current Grade I1 | Min 0.3 mA, Max 0.5 mA; VDD=5 V |
| Working Current Grade I2 | Min 0.4 mA, Max 0.7 mA; VDD=5 V |
| Output Logic Compatibility | TTL and CMOS compatible, active low; product characteristic |
| Receiving Angle | ±35° characterized; receive distance specified at left 35° and right 35° |
| Reliability Test - Solder Heat Resistance | 260°C ±5°C for ≤5 s, 20/20 passed; non-stressed state |
| Reliability Test - ESD | 4 kV, 20/20 passed; 100 pF capacitor, 1.5 kΩ resistor, each pin |
| Reliability Test - Vibration | 10-50 Hz, 1.5 mm amplitude, 30 min, 20/20 passed; X, Y, Z axes |
| Reliability Test - High Temperature Storage | 85°C ±2°C for 240 h, 20/20 passed; storage test |
| Reliability Test - Low Temperature Storage | -20°C ±2°C for 240 h, 20/20 passed; storage test |
| Reliability Test - High Temperature High Humidity Storage | 85°C, 85% RH for 240 h, 20/20 passed; storage test |
| Reliability Test - Thermal Cycling | 10 cycles, 20/20 passed; -20°C for 30 s to +85°C for 30 s |
| Reliability Test - Lead Bending | 2.5 N external force, bend each pin 2 times, 20/20 passed; lead bending test |
| Datasheet Status | request_only |
Product Overview
The XL-IRM0038M is a XINGLIGHT infrared remote receiver module listed in the LED category. Its structure is an epoxy resin plastic encapsulated straw-hat / semi-spherical package with Ø5.0 x 6.0 x 22 mm dimensions, intended for reception of infrared remote-control signals and active-low digital output compatibility with TTL and CMOS interfaces.
Key operating parameters include a recommended supply voltage range of 2.7 V to 5.5 V, a typical input and carrier frequency of 37.9 kHz, and typical BPF width of 6 kHz. At VDD=5 V and Ta=25°C, the working current is specified from 0.3 mA to 0.5 mA. Output levels are defined as a maximum 250 mV low level at Isink=2.0 mA and 4.5 V to 5.0 V high level with VCC=5 V.
Receiving performance is characterized at 0° and ±35°. The module is specified for 6 m minimum and 8 m typical receive distance at 0°, and 5 m minimum and 6 m typical at both left 35° and right 35°. Assembly limits include 240°C for ≤6 s wave soldering and 300°C for 3 s manual soldering.
Key Features
- 37.9 kHz typical carrier frequency
- 6 kHz typical band-pass filter width
- 2.7 V to 5.5 V recommended supply range
- 0.3 mA to 0.5 mA working current at 5 V
- Active-low output compatible with TTL and CMOS logic
- 8 m typical receive distance at 0°
- 6 m typical receive distance at left and right 35°
- 250 mV maximum low-level output at 2.0 mA sink
- 400 µs to 800 µs low output pulse width
- 400 µs to 800 µs high output pulse width
- Epoxy resin semi-spherical straw-hat package
- Wave and manual soldering limits specified
Typical Applications
- Infrared remote control receivers
- Consumer remote-control interfaces
- TTL logic input signal receivers
- CMOS logic input signal receivers
- 37.9 kHz IR receiver circuits
- Active-low digital receiver outputs
- Panel-mounted IR reception points
- Embedded control input modules
Procurement Notes
When requesting a quote for XL-IRM0038M, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
FAQ
What supply voltage is recommended for XL-IRM0038M?
The recommended supply voltage for XL-IRM0038M is specified from 2.7 V minimum to 5.5 V maximum under the recommended usage condition. The absolute maximum supply voltage is 6.0 V at Ta=25°C.
What carrier frequency does XL-IRM0038M receive?
XL-IRM0038M is specified with a typical carrier frequency of 37.9 kHz at Ta=25°C. The recommended input frequency is also listed as 37.9 kHz, with a typical BPF width of 6 kHz.
What output logic does the module provide?
The output is TTL and CMOS compatible and active low. Electrical limits include a maximum low-level output voltage of 250 mV at Isink=2.0 mA and a high-level output voltage from 4.5 V to 5.0 V with VCC=5 V.
What receive distance is specified for XL-IRM0038M?
At Ta=25°C, receive distance is specified as 6 m minimum and 8 m typical at 0°. At both left 35° and right 35°, the receive distance is specified as 5 m minimum and 6 m typical.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.