XL-IRM0038C Infrared Remote Receiver Module

Specifications

Product Overview

The XL-IRM0038C is a XINGLIGHT infrared remote receiver module classified in the LED category. It uses an epoxy resin plastic encapsulated semi-circular spherical SMD package with a 4.5 x 4.0 x 2.3 mm body and 3.1 mm lead length, supporting compact surface-mount receiver layouts.

Electrical characteristics include a recommended supply voltage range of 2.7 V to 5.5 V and a 37.9 kHz typical input frequency. At VDD=5 V and Ta=25°C, working current is specified at 0.3 mA minimum, 0.4 mA typical, and 0.5 mA maximum. Output logic is TTL and CMOS compatible with active-low behavior.

Receiver performance is specified at 15 m minimum and 20 m typical at 0 degrees, and 5 m minimum and 7 m typical at left 35 degrees or right 35 degrees. Assembly limits include wave soldering at 240°C for no more than 6 seconds and manual welding at 300°C for 3 seconds.

Key Features

• Infrared remote receiver module for 37.9 kHz carrier signals
• Epoxy resin semi-circular spherical SMD package
• 4.5 x 4.0 x 2.3 mm package body
• Recommended supply range from 2.7 V to 5.5 V
• 0.4 mA typical working current at VDD=5 V
• 20 m typical receive distance at 0 degrees
• 7 m typical receive distance at left or right 35 degrees
• TTL and CMOS compatible active-low output
• 6 kHz typical band-pass filter width
• REACH and RoHS certified product description

Typical Applications

• Infrared remote receiver circuits
• 37.9 kHz remote-control reception
• TTL-compatible IR input stages
• CMOS-compatible IR input stages
• SMD infrared receiver assemblies
• Active-low receiver output interfaces

Procurement Notes

When requesting a quote for XL-IRM0038C, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.