XL-IRM0038Q Infrared Remote Receiver Module

Specifications

Product Overview

The XL-IRM0038Q is an infrared remote receiver module from XINGLIGHT, integrating a high-speed, high-sensitivity PIN photodiode with a low-power, high-gain preamplifier IC in a single epoxy plastic sealed straw hat cylindrical package measuring Ø4.9 x 8.9 x 22 mm. The module provides TTL and CMOS compatible active-low output, making it suitable for direct interface with microcontroller and logic inputs.

Key operating parameters include a recommended supply voltage range of 2.7 V to 5.5 V, a 37.9 kHz typical carrier frequency, and a band-pass filter width of 6 kHz. The working current is typically 0.4 mA at VDD=5 V. The receiver achieves a typical receive distance of 15 meters at 0° receiving angle and 6 meters at ±35° receiving angle.

The module supports wave soldering at 240°C for up to 6 seconds and manual welding at 300°C for 3 seconds. It operates over an ambient temperature range of -20°C to +85°C and can be stored from -40°C to +125°C. Multiple receive distance and working current grades (L1/L2/L3, I1/I2) are available to suit different application requirements.

Key Features

• Infrared remote receiver module with active-low output
• TTL and CMOS compatible output logic
• 37.9 kHz typical carrier and input frequency
• 6 kHz typical band-pass filter width
• 0.4 mA typical working current at VDD=5 V
• 15 m typical receive distance at 0° angle
• 6 m typical receive distance at left 35° angle
• 6 m typical receive distance at right 35° angle
• 2.7 to 5.5 V recommended supply range
• Epoxy plastic sealed straw hat cylindrical package
• Wave soldering rated 240°C for up to 6 s
• Manual welding rated 300°C for 3 s

Typical Applications

• Infrared remote control receivers
• 37.9 kHz infrared signal detection
• TTL logic interface receiver inputs
• CMOS logic interface receiver inputs
• Active-low digital output receiver circuits
• Low-current infrared receiver modules
• Angle-sensitive infrared reception designs
• Consumer electronics remote control
• Home appliance IR control interfaces

Procurement Notes

When requesting a quote for XL-IRM0038Q, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.