Specifications
| Type | Description |
|---|---|
| Part Number | XL-PT928-6C |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | Through-hole infrared receiver package, 4.6 x 4.5 x 2.5 mm |
| Component Type | Sensor |
| Outline Dimensions | 4.6 x 4.5 x 2.5 mm; L/W/H |
| Optical Function | Infrared receiver tube; transparent colloid |
| Moisture Sensitivity Level | MSL 3 |
| RoHS Compliance | Complies with RoHS Directive |
| Power Dissipation | 75 mW max; maximum rating |
| Collector-Emitter Voltage | 30 V max; maximum rating, VCEO |
| Emitter-Collector Voltage | 5 V max; maximum rating, VECO |
| On-State Collector Current Maximum Rating | 20 mA max; IC(ON) |
| Operating Ambient Temperature | -20°C to +85°C; Topr |
| Storage Ambient Temperature | -40°C to +85°C; Tstg |
| Wave Soldering Condition | 260°C max, <=6 s; soldering point at least 2.0 mm from colloid bottom |
| Manual Welding Condition | 300°C, 3 s; soldering point at least 2.0 mm from colloid bottom |
| Pulse Rating Note | Pulse width <=0.1 ms, duty <=1/10 |
| Collector-Emitter Breakdown Voltage | 30 V min; IC=100 uA, Ee=0 mW/cm², Ta=25°C |
| Emitter-Collector Breakdown Voltage | 5 V min; IC=100 uA, Ee=0 mW/cm², Ta=25°C |
| Collector-Emitter Saturation Voltage | 0.4 V max; IC=2 mA, Ee=1 mW/cm², Ta=25°C |
| Collector Dark Current | 100 nA max; Ee=0 mW/cm², VCE=20 V, Ta=25°C |
| Rise Time | 15 us typ; VCE=5 V, IC=1 mA, RL=1000 ohm, Ta=25°C |
| Fall Time | 15 us typ; VCE=5 V, IC=1 mA, RL=1000 ohm, Ta=25°C |
| On-State Collector Current | 0.513 to 3.433 mA; Ee=0.55 mW/cm², VCE=5 V, Ta=25°C |
| Spectral Bandwidth Range | 400 to 1100 nm; λ0.5, Ta=25°C |
| Peak Sensitivity Wavelength | 940 nm typ; λP, Ta=25°C |
| Rank 6-1 On-State Collector Current | 2.115 to 3.443 mA; Ee=0.55 mW/cm², VCE=5 V |
| Rank 6-2 On-State Collector Current | 1.701 to 2.585 mA; Ee=0.55 mW/cm², VCE=5 V |
| Rank 7-1 On-State Collector Current | 1.314 to 2.079 mA; Ee=0.55 mW/cm², VCE=5 V |
| Rank 7-2 On-State Collector Current | 0.927 to 1.606 mA; Ee=0.55 mW/cm², VCE=5 V |
| Rank 7-3 On-State Collector Current | 0.513 to 1.133 mA; Ee=0.55 mW/cm², VCE=5 V |
| Dimensional Tolerance | ±0.30 mm; unless otherwise specified |
| Recommended Maximum Soldering Temperature | 240°C for 6 s; wave peak welding recommendation |
| Soldering Iron Temperature | <300°C for <=3 s; each terminal, soldering iron capacity <25 W |
| Storage Condition | Temperature <=30°C, relative humidity <=70%; recommended use from original box within 3 months |
| Lead Forming Clearance | 2 mm from colloid; required distance before bending bracket/leads |
| Datasheet Status | request_only |
Product Overview
XL-PT928-6C is a XINGLIGHT infrared receiving phototransistor classified in the LED category. The package is a through-hole infrared receiver type with 4.6 x 4.5 x 2.5 mm outline dimensions and transparent colloid construction for infrared receiver tube function. Unless otherwise specified, dimensional tolerance is ±0.30 mm.
Electrical limits include 75 mW maximum power dissipation, 30 V maximum collector-emitter voltage, 5 V maximum emitter-collector voltage, and 20 mA maximum on-state collector current. At Ta=25°C, the device specifies 30 V minimum collector-emitter breakdown voltage, 5 V minimum emitter-collector breakdown voltage, 0.4 V maximum collector-emitter saturation voltage, and 100 nA maximum collector dark current.
Optical response covers a 400 to 1100 nm spectral bandwidth range with 940 nm typical peak sensitivity wavelength. The on-state collector current range is 0.513 to 3.433 mA at Ee=0.55 mW/cm² and VCE=5 V, with rank bins from 6-1 through 7-3. Assembly guidance includes wave soldering limits, manual welding limits, storage conditions, and 2 mm lead-forming clearance from the colloid.
Key Features
- Through-hole infrared receiver package, 4.6 x 4.5 x 2.5 mm
- Transparent colloid infrared receiver tube construction
- MSL 3 moisture sensitivity classification
- RoHS Directive compliance stated in datasheet
- 75 mW maximum power dissipation rating
- 30 V maximum collector-emitter voltage rating
- 940 nm typical peak sensitivity wavelength
- 400 to 1100 nm spectral bandwidth range
- 15 us typical rise and fall times
- 2 mm lead-forming clearance from colloid
Typical Applications
- Infrared receiver circuits
- Phototransistor sensing circuits
- 940 nm infrared detection
- Through-hole sensor assemblies
- Temperature-rated IR receiving modules
- Ranked collector-current designs
Procurement Notes
When requesting a quote for XL-PT928-6C, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
FAQ
What type of device is XL-PT928-6C?
XL-PT928-6C is an infrared receiving phototransistor from XINGLIGHT. The extracted datasheet facts identify it as a sensor-type LED-category component with transparent colloid infrared receiver tube construction.
What package size does XL-PT928-6C use?
The device uses a through-hole infrared receiver package with outline dimensions of 4.6 x 4.5 x 2.5 mm. The datasheet also lists a dimensional tolerance of ±0.30 mm unless otherwise specified.
What are the key electrical limits for XL-PT928-6C?
Maximum ratings include 75 mW power dissipation, 30 V collector-emitter voltage, 5 V emitter-collector voltage, and 20 mA on-state collector current. Operating ambient temperature is specified from -20°C to +85°C.
What optical response is specified for XL-PT928-6C?
The spectral bandwidth range is 400 to 1100 nm at Ta=25°C, and the typical peak sensitivity wavelength is 940 nm. The on-state collector current range is 0.513 to 3.433 mA under the stated irradiance and voltage conditions.
What soldering guidance applies to XL-PT928-6C?
Wave soldering is rated at 260°C maximum for <=6 seconds with the soldering point at least 2.0 mm from the colloid bottom. The datasheet also recommends a 240°C for 6 seconds wave peak welding condition and <300°C for <=3 seconds soldering iron use.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.