Specifications
| Type | Description |
|---|---|
| Part Number | EL_DSE-0001230-19-217-BHC-XK1L2B11X-3T-V3 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | SMD B; package dimensions not legible in provided text; 8 mm tape on 7 inch diameter reel |
| Emitted Color | Blue |
| Chip Material | InGaN |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V, Ta=25°C |
| Forward Current | 10 mA, Ta=25°C |
| Peak Forward Current | 40 mA, duty 1/10 at 1 kHz, Ta=25°C |
| Power Dissipation | 40 mW, Ta=25°C |
| Electrostatic Discharge | 150 V, HBM |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | Min 7.2 mcd, Max 18.0 mcd at IF=2 mA, Ta=25°C |
| Viewing Angle | Typ 120 deg, 2θ1/2, Ta=25°C |
| Peak Wavelength | Typ 468 nm at IF=2 mA, Ta=25°C |
| Dominant Wavelength | Min 465.0 nm, Max 470.0 nm at IF=2 mA, Ta=25°C |
| Spectrum Radiation Bandwidth | Typ 25 nm at IF=2 mA, Ta=25°C |
| Forward Voltage | Min 2.60 V, Max 2.90 V at IF=2 mA, Ta=25°C |
| Reverse Current | Max 50 μA at VR=5 V, Ta=25°C |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| Forward Voltage Tolerance | ±0.05 V |
| Luminous Intensity Bin K1 | 7.2 to 9.0 mcd at IF=2 mA |
| Luminous Intensity Bin K2 | 9.0 to 11.5 mcd at IF=2 mA |
| Luminous Intensity Bin L1 | 11.5 to 14.5 mcd at IF=2 mA |
| Luminous Intensity Bin L2 | 14.5 to 18.0 mcd at IF=2 mA |
| Dominant Wavelength Bin X | 465.0 to 470.0 nm at IF=2 mA |
| Forward Voltage Bin 28 | 2.60 to 2.70 V at IF=2 mA |
| Forward Voltage Bin 29 | 2.70 to 2.80 V at IF=2 mA |
| Forward Voltage Bin 30 | 2.80 to 2.90 V at IF=2 mA |
| Loaded Quantity | 3000 pcs per reel |
| Storage After Opening | 30°C or less and 60%RH or less |
| Floor Life After Opening | 168 hours / 7 days |
| Baking Treatment | 60±5°C for 24 hours |
| Reflow Cycles | Maximum 2 times |
| Datasheet Status | request_only |
Product Overview
EL_DSE-0001230-19-217-BHC-XK1L2B11X-3T-V3 is an EVERLIGHT mono-color blue SMD LED. The device selection information identifies blue emitted color, InGaN chip material, and water clear resin. The package is listed as SMD B, with package dimensions not legible in the provided text, and carrier packaging uses 8 mm tape on a 7 inch diameter reel.
At Ta=25°C, the absolute maximum ratings include 5 V reverse voltage, 10 mA forward current, 40 mA peak forward current under duty 1/10 at 1 kHz, and 40 mW power dissipation. Operating temperature is -40 to +85°C, with storage from -40 to +90°C.
Optical and electrical characteristics at IF=2 mA and Ta=25°C include 7.2 to 18.0 mcd luminous intensity, 120 degree typical viewing angle, 468 nm typical peak wavelength, 465.0 to 470.0 nm dominant wavelength, and 25 nm typical spectral bandwidth. Assembly limits include 260°C for 10 seconds reflow soldering, 350°C for 3 seconds hand soldering, and a maximum of two reflow cycles.
Key Features
- Blue mono-color SMD LED with InGaN chip
- Water clear resin listed in device selection guide
- Luminous intensity range 7.2 to 18.0 mcd
- Dominant wavelength range 465.0 to 470.0 nm
- Typical 468 nm peak wavelength at 2 mA
- Typical 120 degree viewing angle specification
- Forward voltage range 2.60 to 2.90 V
- Maximum reverse current 50 μA at 5 V
- Supports maximum two reflow soldering cycles
- Carrier tape load quantity 3000 pcs per reel
Typical Applications
- Blue status indicators
- SMD display indicators
- Panel indication lights
- Compact electronic indicators
- Color-coded signal indication
Procurement Notes
When requesting a quote for EL_DSE-0001230-19-217-BHC-XK1L2B11X-3T-V3, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does this EVERLIGHT SMD LED emit?
The datasheet extraction identifies EL_DSE-0001230-19-217-BHC-XK1L2B11X-3T-V3 as a mono-color blue SMD LED. The device selection guide lists blue emitted color, InGaN chip material, and water clear resin.
What are the optical specifications at 2 mA?
At IF=2 mA and Ta=25°C, luminous intensity is specified from 7.2 to 18.0 mcd. The typical viewing angle is 120 degrees, typical peak wavelength is 468 nm, and dominant wavelength is 465.0 to 470.0 nm.
What assembly limits are specified for soldering?
The extracted soldering limits specify 260°C for 10 seconds for reflow soldering and 350°C for 3 seconds for hand soldering. The reflow soldering process is limited to a maximum of two cycles.
How should the opened moisture-proof package be stored?
After opening the moisture-proof package, storage must be 30°C or less and 60%RH or less. The listed floor life after opening is 168 hours, or 7 days.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.