Specifications
| Type | Description |
|---|---|
| Part Number | EL_DSE-0001534-19-217-Y5C-AM1N1VY-3T-V4 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | SMD B; package dimensions shown in datasheet, unit mm, tolerances unless mentioned ±0.1 mm |
| Chip Material | AlGaInP |
| Emitted Color | Brilliant Yellow |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V, Ta=25°C |
| Forward Current | 25 mA, Ta=25°C |
| Peak Forward Current | 60 mA, duty 1/10 @ 1 kHz, Ta=25°C |
| Power Dissipation | 60 mW, Ta=25°C |
| Electrostatic Discharge | 2000 V, HBM, Ta=25°C |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | 18.0-36.0 mcd, IF=5 mA, Ta=25°C |
| Viewing Angle | 120 deg, 2θ1/2, Ta=25°C |
| Peak Wavelength | 591 nm typ, IF=5 mA, Ta=25°C |
| Dominant Wavelength | 585.5-594.5 nm, IF=5 mA, Ta=25°C |
| Spectrum Radiation Bandwidth | 15 nm typ, IF=5 mA, Ta=25°C |
| Forward Voltage | 1.7-2.2 V, IF=5 mA, Ta=25°C |
| Reverse Current | 10 µA max, VR=5 V, Ta=25°C |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| Forward Voltage Tolerance | ±0.05 V |
| Luminous Intensity Bin M1 | 18.0-22.5 mcd, IF=5 mA |
| Luminous Intensity Bin M2 | 22.5-28.5 mcd, IF=5 mA |
| Luminous Intensity Bin N1 | 28.5-36.0 mcd, IF=5 mA |
| Dominant Wavelength Bin D3 | 585.5-588.5 nm, IF=5 mA |
| Dominant Wavelength Bin D4 | 588.5-591.5 nm, IF=5 mA |
| Dominant Wavelength Bin D5 | 591.5-594.5 nm, IF=5 mA |
| Forward Voltage Bin 19 | 1.7-1.8 V, IF=5 mA |
| Forward Voltage Bin 20 | 1.8-1.9 V, IF=5 mA |
| Forward Voltage Bin 21 | 1.9-2.0 V, IF=5 mA |
| Forward Voltage Bin 22 | 2.0-2.1 V, IF=5 mA |
| Forward Voltage Bin 23 | 2.1-2.2 V, IF=5 mA |
| Carrier Tape Loaded Quantity | 3000 pcs per reel |
| Tape/Reel Packaging | 8 mm tape on 7 inch diameter reel |
| Post-Opening Storage Condition | 30°C or less and 60%RH or less |
| Floor Life After Opening | 168 hours / 7 days |
| Baking Treatment | 60±5°C for 24 hours |
| Pb-Free Reflow Peak Temperature | 260°C max |
| Reflow Time Above 255°C | 10 sec max |
| Reflow Time Above 217°C | 60-150 sec |
| Preheating Temperature Range | 150-200°C |
| Preheating Time | 60-120 sec |
| Maximum Reflow Cycles | 2 times |
| Soldering Iron Condition | Less than 350°C for 3 seconds, once per terminal, soldering iron capacity less than 25 W |
| Datasheet Status | request_only |
Product Overview
EL_DSE-0001534-19-217-Y5C-AM1N1VY-3T-V4 is an EVERLIGHT brilliant yellow SMD LED using AlGaInP chip material with water clear resin. The package is identified as SMD B, with datasheet package dimensions in millimeters and general tolerances of ±0.1 mm unless otherwise mentioned.
At IF=5 mA and Ta=25°C, the LED provides 18.0-36.0 mcd luminous intensity, 591 nm typical peak wavelength, 585.5-594.5 nm dominant wavelength, and 15 nm typical spectrum radiation bandwidth. The forward voltage range is 1.7-2.2 V at IF=5 mA, with reverse current specified as 10 µA maximum at VR=5 V.
Assembly data includes 8 mm tape on a 7 inch diameter reel, 3000 pcs per reel, and Pb-free reflow profile limits including 260°C maximum peak temperature. The device supports operating temperatures from -40 to +85°C and storage temperatures from -40 to +90°C, making it applicable to compact surface-mount yellow indication and status-lighting designs.
Key Features
- Brilliant Yellow emission with water clear resin
- AlGaInP chip material for yellow LED output
- 18.0-36.0 mcd luminous intensity at 5 mA
- 120 deg viewing angle at Ta=25°C
- 585.5-594.5 nm dominant wavelength range
- 1.7-2.2 V forward voltage at 5 mA
- 25 mA forward current absolute maximum rating
- 60 mA peak forward current at duty 1/10
- 8 mm tape on 7 inch reel packaging
- 3000 pcs loaded quantity per reel
Typical Applications
- Yellow status indication
- Surface-mount panel indicators
- Compact signal lighting
- Electronic equipment indicators
- Brilliant yellow display points
- PCB-mounted visual alerts
Procurement Notes
When requesting a quote for EL_DSE-0001534-19-217-Y5C-AM1N1VY-3T-V4, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does this EVERLIGHT SMD LED emit?
EL_DSE-0001534-19-217-Y5C-AM1N1VY-3T-V4 emits Brilliant Yellow light. The datasheet identifies the chip material as AlGaInP and the resin color as Water Clear in the device selection guide.
What luminous intensity range is specified at 5 mA?
At IF=5 mA and Ta=25°C, the luminous intensity range is 18.0-36.0 mcd. The datasheet also lists bin ranges M1, M2, and N1 covering that same intensity span.
What soldering limits apply to this SMD LED?
The soldering ratings include 260°C for 10 seconds for reflow soldering and 350°C for 3 seconds for hand soldering. The Pb-free profile specifies 260°C maximum peak temperature and no more than two reflow cycles.
How is this part packaged for assembly?
The datasheet lists tape/reel packaging as 8 mm tape on a 7 inch diameter reel. The carrier tape loaded quantity is specified as 3000 pcs per reel.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.