Specifications
| Type | Description |
|---|---|
| Part Number | EL_DSE-0008610-19-217-R6C-P1Q2-3T-V6 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | SMD B; package dimensions shown in datasheet, unit mm, tolerances ±0.1 mm unless mentioned |
| Emitted Color | Brilliant Red |
| Chip Material | AlGaInP |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V, absolute maximum rating at Ta=25°C |
| Forward Current | 25 mA, absolute maximum rating at Ta=25°C |
| Peak Forward Current | 60 mA, duty 1/10 at 1 kHz, Ta=25°C |
| Power Dissipation | 60 mW, absolute maximum rating at Ta=25°C |
| Electrostatic Discharge | 2000 V HBM, absolute maximum rating at Ta=25°C |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | Min 45.0 mcd, Typ not specified, Max 112 mcd at IF=20 mA, Ta=25°C |
| Viewing Angle | Typ 120 deg, 2θ1/2, Ta=25°C |
| Peak Wavelength | Typ 632 nm at IF=20 mA, Ta=25°C |
| Dominant Wavelength | Typ 624 nm at IF=20 mA, Ta=25°C |
| Spectrum Radiation Bandwidth | Typ 20 nm at IF=20 mA, Ta=25°C |
| Forward Voltage | Min 1.7 V, Typ 2.0 V, Max 2.4 V at IF=20 mA, Ta=25°C |
| Reverse Current | Max 10 µA at VR=5 V, Ta=25°C |
| Luminous Intensity Tolerance | ±11% |
| Luminous Intensity Bin P1 | 45.0 to 57.0 mcd at IF=20 mA |
| Luminous Intensity Bin P2 | 57.0 to 72.0 mcd at IF=20 mA |
| Luminous Intensity Bin Q1 | 72.0 to 90.0 mcd at IF=20 mA |
| Luminous Intensity Bin Q2 | 90.0 to 112 mcd at IF=20 mA |
| Loaded Quantity | 3000 pcs per reel |
| Tape and Reel Packaging | 8 mm tape on 7 inch diameter reel |
| Storage Before Opening | 30°C or less and 90%RH or less |
| Floor Life After Opening | 1 year at 30°C or less and 60%RH or less |
| Baking Treatment | 60±5°C for 24 hours if silica gel faded or LEDs exceed storage time |
| Reflow Cycles | Not more than two times |
| Datasheet Status | request_only |
Product Overview
EL_DSE-0008610-19-217-R6C-P1Q2-3T-V6 is an EVERLIGHT SMD brilliant red LED using AlGaInP chip material and water clear resin. The emitted color is brilliant red, with optical characteristics specified at IF=20 mA and Ta=25°C, including 632 nm typical peak wavelength, 624 nm typical dominant wavelength, and 20 nm typical spectrum radiation bandwidth.
The LED provides 45.0 to 112 mcd luminous intensity at IF=20 mA, with bin ranges P1, P2, Q1, and Q2 covering 45.0 to 112 mcd. Its typical viewing angle is 120 degrees, supporting applications that need a broad visible indication pattern.
Electrical limits include 5 V reverse voltage, 25 mA forward current, 60 mA peak forward current under duty 1/10 at 1 kHz, and 60 mW power dissipation at Ta=25°C. Forward voltage is specified as 1.7 V minimum, 2.0 V typical, and 2.4 V maximum at IF=20 mA.
The SMD B package is supplied in carrier tape packaging with 3000 pieces per reel, using 8 mm tape on a 7 inch diameter reel. Assembly guidance includes reflow soldering at 260°C for 10 seconds, hand soldering at 350°C for 3 seconds, and no more than two reflow cycles.
Key Features
- Brilliant red emission with AlGaInP chip material
- Water clear resin in SMD B package
- 45.0 to 112 mcd luminous intensity at 20 mA
- 624 nm typical dominant wavelength at 20 mA
- 120 degree typical viewing angle
- 1.7 V to 2.4 V forward voltage range
- 25 mA forward current absolute maximum rating
- 60 mA peak forward current at 1 kHz duty
- 260°C reflow soldering for 10 seconds
- 3000 pieces per 7 inch reel
Typical Applications
- Brilliant red status indicators
- Surface-mount signal indicators
- Panel indicator lighting
- Compact red visual alerts
- Broad-angle indication designs
- Tape-and-reel LED assembly
Procurement Notes
When requesting a quote for EL_DSE-0008610-19-217-R6C-P1Q2-3T-V6, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does EL_DSE-0008610-19-217-R6C-P1Q2-3T-V6 emit?
EL_DSE-0008610-19-217-R6C-P1Q2-3T-V6 emits brilliant red light. The datasheet lists AlGaInP chip material, water clear resin, 632 nm typical peak wavelength, and 624 nm typical dominant wavelength at IF=20 mA and Ta=25°C.
What luminous intensity range is specified for this LED?
The luminous intensity is specified as 45.0 mcd minimum and 112 mcd maximum at IF=20 mA and Ta=25°C. The datasheet also lists bin ranges P1, P2, Q1, and Q2 covering 45.0 to 112 mcd.
What soldering limits apply to this SMD LED?
The soldering ratings specify reflow soldering at 260°C for 10 seconds and hand soldering at 350°C for 3 seconds. The reflow soldering precaution states that reflow cycles should be not more than two times.
How is this EVERLIGHT LED packaged for assembly?
The device uses tape and reel packaging with 8 mm tape on a 7 inch diameter reel. The carrier tape packaging loaded quantity is listed as 3000 pieces per reel.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.