Specifications
| Type | Description |
|---|---|
| Part Number | EL_DSE-0006617-19-217-GHC-YR1S2-3T-V5 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package Case | SMD B; package dimensions shown in datasheet drawing, unit mm, tolerance ±0.1 mm unless specified |
| Product Series | 19-217/GHC-YR1S2/3T |
| LED Type | Mono-color SMD LED |
| Emitted Color | Brilliant Green |
| Chip Material | InGaN |
| Resin Color | Water Clear |
| Forward Current | 25 mA |
| Peak Forward Current | 50 mA |
| Power Dissipation | 95 mW |
| Electrostatic Discharge | 150 V |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | 112 min, 285 max mcd |
| Viewing Angle | 120 deg typ |
| Peak Wavelength | 518 nm typ |
| Dominant Wavelength | 520 min, 535 max nm |
| Spectrum Radiation Bandwidth | 35 nm typ |
| Forward Voltage | 2.7 min, 3.3 typ, 3.7 max V |
| Reverse Current | 50 µA max |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| Luminous Intensity Bin R1 | 112 to 140 mcd |
| Luminous Intensity Bin R2 | 140 to 180 mcd |
| Luminous Intensity Bin S1 | 180 to 225 mcd |
| Luminous Intensity Bin S2 | 225 to 285 mcd |
| Dominant Wavelength Bin X | 520 to 525 nm |
| Dominant Wavelength Bin Y | 525 to 530 nm |
| Dominant Wavelength Bin Z | 530 to 535 nm |
| Tape Packaging | 8 mm tape on 7 inch diameter reel |
| Loaded Quantity | 3000 pcs per reel |
| Carrier Tape Dimension Tolerance | ±0.1 mm unless specified |
| Reel Dimension Tolerance | ±0.1 mm unless specified |
| Package Dimension Tolerance | ±0.1 mm unless specified |
| Post-Opening Storage Condition | 30°C or less and 60%RH or less |
| Floor Life After Opening | 168 hours / 7 days |
| Pb-Free Reflow Peak Temperature | 260°C max |
| Time Above 255°C | 10 sec max |
| Time Above 217°C | 30 sec max |
| Preheating Temperature Range | 150 to 200°C |
| Preheating Time | 60 to 120 sec |
| Reflow Soldering Cycles | Not more than two times |
| Soldering Iron Power | Less than 25 W |
| Soldering Iron Tip Temperature | Less than 350°C for 3 sec within once per terminal |
| RoHS Compliance | Product will remain within RoHS compliant version |
| REACH Compliance | Compliant with EU REACH |
| Halogen Free Requirement | Br <900 ppm, Cl <900 ppm, Br+Cl <1500 ppm |
| Datasheet Status | request_only |
Product Overview
EL_DSE-0006617-19-217-GHC-YR1S2-3T-V5 is an EVERLIGHT mono-color SMD brilliant green LED from the 19-217/GHC-YR1S2/3T product series. The device selection data identifies brilliant green emission, InGaN chip material, and water clear resin construction.
The LED is specified for 25 mA forward current at 25°C, with 50 mA peak forward current under duty 1/10 at 1 kHz. At IF=20 mA and Ta=25°C, the forward voltage range is 2.7 V minimum, 3.3 V typical, and 3.7 V maximum. Optical data includes 112 to 285 mcd luminous intensity, 518 nm typical peak wavelength, 520 to 535 nm dominant wavelength, 35 nm typical spectral bandwidth, and 120 degree typical viewing angle.
The package case is SMD B, with package dimensions defined by the datasheet drawing and ±0.1 mm tolerance unless specified. Assembly and handling data include 260°C for 10 seconds reflow soldering, 350°C for 3 seconds hand soldering, Pb-free reflow peak temperature of 260°C maximum, and not more than two reflow cycles. The device is supplied in 8 mm tape on a 7 inch reel, 3000 pieces per reel.
Key Features
- Mono-color SMD LED with brilliant green emission
- InGaN chip material with water clear resin
- 112 to 285 mcd luminous intensity at 20 mA
- 520 to 535 nm dominant wavelength range
- 120 degree typical viewing angle at 25°C
- 2.7 to 3.7 V forward voltage range
- 25 mA forward current absolute maximum rating
- 8 mm tape on 7 inch reel packaging
- 3000 pieces loaded per reel
- RoHS compliant version and EU REACH compliant
Typical Applications
- Status indicator lighting
- Brilliant green panel indicators
- Compact SMD light points
- PCB-mounted visual indication
- Equipment front-panel indicators
- Consumer electronics indicators
- Green signal indication
Procurement Notes
When requesting a quote for EL_DSE-0006617-19-217-GHC-YR1S2-3T-V5, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What type of LED is EL_DSE-0006617-19-217-GHC-YR1S2-3T-V5?
EL_DSE-0006617-19-217-GHC-YR1S2-3T-V5 is specified as a mono-color SMD brilliant green LED from EVERLIGHT. The device selection data lists InGaN chip material and a water clear resin color.
What optical output is specified at 20 mA?
At IF=20 mA and Ta=25°C, the datasheet specifies luminous intensity from 112 mcd minimum to 285 mcd maximum. It also lists a 518 nm typical peak wavelength and 120 degree typical viewing angle.
What soldering limits apply to this SMD LED?
The soldering data lists 260°C for 10 seconds as the reflow soldering temperature and 350°C for 3 seconds for hand soldering. The Pb-free profile gives 260°C maximum peak temperature and not more than two reflow cycles.
How is this EVERLIGHT LED packaged for assembly?
The device is supplied as 8 mm tape on a 7 inch diameter reel. The carrier tape section lists 3000 pieces per reel, with carrier tape and reel dimension tolerance of ±0.1 mm unless otherwise specified.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.