Specifications
| Type | Description |
|---|---|
| Part Number | EL_DSE-0001398-19-217-S2C-AL1M2VY-3T |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | SMD B; dimensions shown in drawing, unit mm, tolerances ±0.1 mm unless mentioned |
| Emitted Color | Brilliant Orange |
| Chip Material | AlGaInP |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V |
| Forward Current | 25 mA |
| Peak Forward Current | 60 mA |
| Power Dissipation | 60 mW |
| Electrostatic Discharge | 2000 V |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | 11.5 to 28.5 mcd |
| Viewing Angle | 120 deg |
| Peak Wavelength | 611 nm typ |
| Dominant Wavelength | 600.5 to 612.5 nm |
| Spectrum Radiation Bandwidth | 17 nm typ |
| Forward Voltage | 1.70 to 2.20 V |
| Reverse Current | 10 µA max |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| Forward Voltage Tolerance | ±0.05 V |
| Luminous Intensity Bin L1 | 11.5 to 14.5 mcd |
| Luminous Intensity Bin L2 | 14.5 to 18.0 mcd |
| Luminous Intensity Bin M1 | 18.0 to 22.5 mcd |
| Luminous Intensity Bin M2 | 22.5 to 28.5 mcd |
| Dominant Wavelength Bin D8 | 600.5 to 603.5 nm |
| Dominant Wavelength Bin D9 | 603.5 to 606.5 nm |
| Dominant Wavelength Bin D10 | 606.5 to 609.5 nm |
| Dominant Wavelength Bin D11 | 609.5 to 612.5 nm |
| Forward Voltage Bin 19 | 1.70 to 1.80 V |
| Forward Voltage Bin 20 | 1.80 to 1.90 V |
| Forward Voltage Bin 21 | 1.90 to 2.00 V |
| Forward Voltage Bin 22 | 2.00 to 2.10 V |
| Forward Voltage Bin 23 | 2.10 to 2.20 V |
| Loaded Quantity | 3000 pcs per reel |
| Tape and Reel Packaging | 8 mm tape on 7 inch diameter reel |
| Moisture Storage Before Opening | 30°C or less and 90% RH or less |
| Floor Life After Opening | 1 year |
| Baking Treatment | 60±5°C for 24 hours |
| Reflow Peak Temperature | 260°C max |
| Reflow Time Above 255°C | 10 sec max |
| Reflow Time Above 217°C | 60 to 120 sec |
| Preheating Temperature | 150 to 200°C |
| Preheating Time | 60 to 150 sec |
| Maximum Reflow Cycles | 2 times |
| Soldering Iron Limit | Less than 350°C for 3 sec within once |
| Datasheet Status | request_only |
Product Overview
The EVERLIGHT EL_DSE-0001398-19-217-S2C-AL1M2VY-3T is specified as a Brilliant Orange SMD LED. The device selection guide lists AlGaInP chip material and water clear resin color, with the package identified as SMD B using drawing dimensions in millimeters and ±0.1 mm tolerances unless otherwise noted.
At IF=5 mA and Ta=25°C, optical characteristics include 11.5 to 28.5 mcd luminous intensity, 120 degree viewing angle, 611 nm typical peak wavelength, 600.5 to 612.5 nm dominant wavelength, and 17 nm typical spectrum radiation bandwidth. Electrical data includes 1.70 to 2.20 V forward voltage and 10 µA maximum reverse current at VR=5 V.
For assembly and handling, the part is supplied as 8 mm tape on a 7 inch diameter reel with 3000 pcs per reel. The Pb-free reflow profile allows 260°C maximum peak temperature, 10 seconds maximum above 255°C, 60 to 120 seconds above 217°C, and a maximum of 2 reflow cycles.
Key Features
- Brilliant orange emitted color with water clear resin
- AlGaInP chip material listed in device guide
- 11.5 to 28.5 mcd at IF=5 mA
- 120 degree viewing angle at Ta=25°C
- 600.5 to 612.5 nm dominant wavelength
- 1.70 to 2.20 V forward voltage
- 10 µA maximum reverse current at VR=5 V
- 25 mA absolute maximum forward current
- 8 mm tape on 7 inch reel packaging
- 3000 pieces loaded per reel
Typical Applications
- Orange status indicators
- Panel annunciator LEDs
- SMD indicator assemblies
- Wide-angle visual indication
- Reflow-assembled LED boards
- Brilliant orange signal lights
Procurement Notes
When requesting a quote for EL_DSE-0001398-19-217-S2C-AL1M2VY-3T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does EL_DSE-0001398-19-217-S2C-AL1M2VY-3T emit?
The device selection guide specifies Brilliant Orange emitted color. The LED uses AlGaInP chip material and water clear resin, with dominant wavelength specified from 600.5 to 612.5 nm at IF=5 mA and Ta=25°C.
What are the forward voltage and current ratings?
At IF=5 mA and Ta=25°C, forward voltage is specified from 1.70 to 2.20 V. Absolute maximum forward current is 25 mA at Ta=25°C, and peak forward current is 60 mA for duty 1/10 at 1 kHz.
How is this EVERLIGHT SMD LED packaged?
The datasheet identifies SMD B as the package case. Packaging information lists 8 mm tape on a 7 inch diameter reel, with a loaded quantity of 3000 pieces per reel.
What soldering profile limits apply to this part?
The Pb-free reflow profile specifies 260°C maximum peak temperature, 10 seconds maximum above 255°C, 60 to 120 seconds above 217°C, and 150 to 200°C preheating for 60 to 150 seconds. Maximum reflow cycles are 2 times.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.