Specifications
| Type | Description |
|---|---|
| Part Number | EL_DSE-0026282-19-217-S3C-AL2N1VY-3T-V2 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | SMD-B; package dimensions shown in drawing, unit mm, tolerances unless mentioned ±0.1 mm |
| Chip Material | AlGaInP |
| Emitted Color | Reddish Orange |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V |
| Forward Current | 25 mA |
| Peak Forward Current | 60 mA |
| Power Dissipation | 60 mW |
| Electrostatic Discharge | 2000 V |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | 14.5 min, 36.0 max mcd |
| Viewing Angle | 120° typ |
| Peak Wavelength | 621 nm typ |
| Dominant Wavelength | 605.5 min, 625.5 max nm |
| Spectrum Radiation Bandwidth | 18 nm typ |
| Forward Voltage | 1.7 min, 2.2 max V |
| Reverse Current | 10 µA max |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| Forward Voltage Tolerance | ±0.05 V |
| Reverse Operation Note | Device is not designed for reverse operation |
| Luminous Intensity Bin L2 | 14.5 to 18.0 mcd |
| Luminous Intensity Bin M1 | 18.0 to 22.5 mcd |
| Luminous Intensity Bin M2 | 22.5 to 28.5 mcd |
| Luminous Intensity Bin N1 | 28.5 to 36.0 mcd |
| Dominant Wavelength Bin E1 | 605.5 to 609.5 nm |
| Dominant Wavelength Bin E2 | 609.5 to 613.5 nm |
| Dominant Wavelength Bin E3 | 613.5 to 617.5 nm |
| Dominant Wavelength Bin E4 | 617.5 to 621.5 nm |
| Dominant Wavelength Bin E5 | 621.5 to 625.5 nm |
| Forward Voltage Bin 19 | 1.7 to 1.8 V |
| Forward Voltage Bin 20 | 1.8 to 1.9 V |
| Forward Voltage Bin 21 | 1.9 to 2.0 V |
| Forward Voltage Bin 22 | 2.0 to 2.1 V |
| Forward Voltage Bin 23 | 2.1 to 2.2 V |
| Loaded Quantity | 3000 pcs per reel |
| Tape/Reel Packaging | 8 mm tape on 7 inch diameter reel |
| Pb-Free | Yes |
| RoHS Compliance | Product remains within RoHS compliant version |
| REACH Compliance | Compliant with EU REACH |
| Halogen Free Limit | Br <900 ppm, Cl <900 ppm, Br+Cl <1500 ppm |
| Post-Open Storage Condition | 30°C or less and 60%RH or less |
| Floor Life After Opening | 168 hours / 7 days |
| Baking Treatment | 60±5°C for 24 hours |
| Pb-Free Reflow Peak Temperature | 260°C max |
| Reflow Time Above 255°C | 10 sec max |
| Reflow Time Above 217°C | 30 sec max |
| Preheating Temperature Range | 150 to 200°C |
| Preheating Time | 60 to 120 sec |
| Reflow Soldering Limit | Not more than two times |
| Soldering Iron Power | 25 W max |
| Soldering Iron Tip Temperature | Less than 350°C for 3 sec within once per terminal |
| Datasheet Status | request_only |
Product Overview
EL_DSE-0026282-19-217-S3C-AL2N1VY-3T-V2 is an EVERLIGHT reddish orange SMD LED built with an AlGaInP chip and water clear resin. The package is identified as SMD-B, with mechanical dimensions provided in the package drawing and default dimensional tolerance of ±0.1 mm unless otherwise stated.
At IF=5 mA and Ta=25°C, the LED is specified for 14.5 to 36.0 mcd luminous intensity, 621 nm typical peak wavelength, and 605.5 to 625.5 nm dominant wavelength. The typical viewing angle is 120°, and the spectrum radiation bandwidth is 18 nm typical. Forward voltage is listed from 1.7 to 2.2 V, with reverse current limited to 10 µA maximum at VR=5 V for test purposes only.
Assembly data includes Pb-free reflow peak temperature of 260°C maximum, 10 seconds maximum above 255°C, and not more than two reflow passes. The device is supplied on 8 mm tape with a 7 inch reel, 3000 pieces per reel, for surface-mount LED assembly.
Key Features
- Reddish orange SMD LED with AlGaInP chip
- Water clear resin in SMD-B package
- 14.5 to 36.0 mcd at IF=5 mA
- 120° typical viewing angle at Ta=25°C
- 621 nm typical peak wavelength at IF=5 mA
- 1.7 to 2.2 V forward voltage range
- 25 mA forward current absolute maximum
- 260°C maximum Pb-free reflow peak temperature
- 8 mm tape on 7 inch reel packaging
- 3000 pieces loaded per reel
Typical Applications
- Reddish orange status indicators
- Surface-mount signal lighting
- Compact panel indication
- Color-coded equipment indicators
- Low-current visual indication
- PCB-mounted warning indicators
Procurement Notes
When requesting a quote for EL_DSE-0026282-19-217-S3C-AL2N1VY-3T-V2, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does this EVERLIGHT SMD LED emit?
EL_DSE-0026282-19-217-S3C-AL2N1VY-3T-V2 emits reddish orange light. The datasheet lists an AlGaInP chip, water clear resin, 621 nm typical peak wavelength, and 605.5 to 625.5 nm dominant wavelength at IF=5 mA.
What are the main optical ratings at IF=5 mA?
At IF=5 mA and Ta=25°C, luminous intensity is specified from 14.5 to 36.0 mcd. The typical viewing angle is 120°, peak wavelength is 621 nm typical, and spectrum radiation bandwidth is 18 nm typical.
Can this LED be used in reverse operation?
The datasheet states that the device is not designed for reverse operation. The 5 V reverse-voltage condition is associated with reverse-current testing only, where reverse current is specified as 10 µA maximum at VR=5 V.
What soldering limits apply to this part?
Pb-free reflow peak temperature is 260°C maximum, with 10 seconds maximum above 255°C and 30 seconds maximum above 217°C. Reflow soldering is limited to not more than two times. Hand soldering is less than 350°C for 3 seconds per terminal.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.