UCC27531 Single Gate Driver

Specifications

Product Overview

The UCC27531 is a Texas Instruments single-channel high-speed gate driver for MOSFET and IGBT power switches. It provides a single non-inverting input and supports TTL and CMOS compatible input logic with thresholds independent of supply voltage. Device variants support enable function availability as Yes/No and output configuration as Split/Single.

The driver operates from a recommended VDD range of 10 V to 35 V, with 35 V maximum VDD identified for the UCC27531. At 18 V VDD, the driver provides 2.5 A peak source current and 5 A peak sink current. Timing parameters include 17 ns typical propagation delay, 15 ns typical rise time, and 7 ns typical fall time with a 1800 pF load.

Package options include SOT-23-6 DBV at 2.90 mm x 1.60 mm and SOIC-8 D at 4.90 mm x 3.91 mm. Assembly and limit data include 300°C lead temperature for 10 seconds, 260°C reflow temperature, -65°C to 150°C storage temperature, ±4000 V HBM ESD rating, and ±1000 V CDM ESD rating.

Key Features

• Single-channel high-speed driver for MOSFET and IGBT switches
• 2.5 A peak source current at 18 V VDD
• 5 A peak sink current at 18 V VDD
• 10 V to 35 V recommended VDD operating range
• 17 ns typical propagation delay
• 15 ns rise time with 1800 pF load
• 7 ns fall time with 1800 pF load
• TTL and CMOS compatible input logic
• Single non-inverting input, no inverting input support
• Integrated VDD undervoltage lockout holds output low
• Input and enable pins tolerate -5 VDC below ground
• Output held low when input is floating

Typical Applications

• MOSFET gate drive
• IGBT gate drive
• Power switch control
• Single-channel power stages
• TTL logic driven gate control
• CMOS logic driven gate control
• Split output gate drive
• Single output gate drive

Procurement Notes

When requesting a quote for UCC27531, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For power IC and power device sourcing, voltage rating, current rating, power dissipation, package thermal performance, protection features, qualification grade and application conditions should be reviewed before approval.