XL-0807RGBC-WS2812B Addressable RGB LED

XINGLIGHT LED — specifications, applications, sourcing support and RFQ.

XL-0807RGBC-WS2812B XINGLIGHT SMD LED image

Images for reference only

XL-0807RGBC-WS2812B Addressable RGB LED

RFQ Available Sourcing Support Alternative Matching RoHS
Part Number
XL-0807RGBC-WS2812B
Manufacturer
XINGLIGHT
Package
0807 SMD, 2.0 x 1.8 x 0.8 mm
Category
LED
Product Type
SMD LED
Request Quote Request Datasheet

Quick Sourcing Note

XL-0807RGBC-WS2812B from XINGLIGHT is an LED in the addressable RGB LED category, supplied in an 0807 SMD package measuring 2.0 x 1.8 x 0.8 mm. It uses RGB emission with a transparent colloid and supports 800 Kbps data transmission, 24-bit GRB data, 256 grayscale levels, and at least 1024 points at a 30 frames/s refresh rate. Critical parameters include a 3.5-5.5 V chip supply range, 12 mA/channel preset constant current, 120 degree typical half-light angle, and -40 to +85 °C operating range. Typical applications include compact addressable RGB pixels, cascaded LED indicators, display points, and lighting modules.

Specifications

TypeDescription
Part NumberXL-0807RGBC-WS2812B
ManufacturerXINGLIGHT
Product TypeSMD LED
CategoryLED
Package / Case0807 SMD, 2.0 x 1.8 x 0.8 mm
Outline Dimensions2.0 x 1.8 x 0.8 mm; L/W/H
Luminous ColorRGB; transparent colloid
Moisture Sensitivity LevelMSL 5; specified moisture sensitivity level
Data Transmission Frequency800 Kbps; WS2812B functional characteristic
Supported Refresh Pointsnot less than 1024 points; 30 frames/s refresh rate
Grayscale Levels256 levels; PWM output control
Port Scan Frequency1.5 kHz; output port PWM control
Preset Constant Current12 mA/channel; optimized preset constant-current mode
Intra-chip Current Error<1.5%; constant-current accuracy
Inter-chip Current Error<3%; constant-current accuracy
Supply Voltage Absolute Maximum3.5-5.5 V; Ta=25°C
Logic Input Voltage Absolute Maximum-0.5 to VDD+5.5 V; Ta=25°C
Output Port Withstand Voltage10 V; Ta=25°C
Operating Temperature-40 to +85 °C; absolute maximum rating
Storage Temperature-40 to +85 °C; absolute maximum rating
Reflow Soldering Temperature260 °C for 6 s; absolute maximum rating
ESD Sensitivity3000 V HBM; absolute maximum rating
Red Light Intensitytyp 200 mcd; Ta=25°C
Green Light Intensitytyp 800 mcd; Ta=25°C
Blue Light Intensitytyp 300 mcd; Ta=25°C
Red Dominant Wavelength620-630 nm; IF=20 mA, Ta=25°C
Green Dominant Wavelength520-530 nm; IF=20 mA, Ta=25°C
Blue Dominant Wavelength460-475 nm; IF=20 mA, Ta=25°C
Red Peak Wavelengthtyp 625 nm; Ta=25°C
Green Peak Wavelengthtyp 525 nm; Ta=25°C
Blue Peak Wavelengthtyp 470 nm; Ta=25°C
Half Light Angletyp 120 deg; 2θ1/2, Ta=25°C
Chip Power Supply Voltagemin 3.5 V, max 5.5 V; electrical parameters, Ta=25°C
Static Currenttyp 0.35 mA; VDD=5 V, IOUT off
Input High Threshold Voltagemin 0.55 x VDD; DIN input high level
Input Low Threshold Voltagemax 0.3 x VDD; DIN input low level
DOUT Output Currenttyp 15 mA; DOUT high output, 10 ohm resistor to GND
DOUT Sink Currenttyp 17 mA; DOUT low output, current sunk from supply to DOUT
OUT RGB Output Currenttyp 12 mA; VDD=5 V, VDS=1 V
Output Current Variation vs VDStyp 0.5%; IOUT=12 mA, VDS=1.0-3.0 V
Output Current Variation vs VDDtyp 5.0%; IOUT=12 mA, VDD=4.5-5.5 V
Output Current Variation vs Temperaturetyp 5.0%; IOUT=12 mA, TA=-40°C to +85°C
Output PWM Frequencytyp 4.5 kHz; IOUT=5 mA, OUT port series 200 ohm resistor to VDD
Signal Transmission Delay tPLHtyp 80 ns; DOUT load capacitance 30 pF to ground, DIN to DOUT
Signal Transmission Delay tPHLtyp 80 ns; DOUT load capacitance 30 pF to ground, DIN to DOUT
DOUT Conversion Time tTLHtyp 12 ns; DOUT load capacitance 30 pF to ground
DOUT Conversion Time tTHLtyp 10 ns; DOUT load capacitance 30 pF to ground
OUT RGB Rise Timetyp 500 ns; IOUTR/G/B=5 mA, OUTR/G/B port series 200 ohm resistor to VDD, load capacitance 30 pF to ground
OUT RGB Fall Timetyp 500 ns; IOUTR/G/B=5 mA, OUTR/G/B port series 200 ohm resistor to VDD, load capacitance 30 pF to ground
Data Structure24 bit; data sent high-order bit first in GRB order
Input 0 Code High Level Timemin 0.3 us; signal transmission definition
Input 1 Code High Level Timemin 0.9 us; signal transmission definition
Input 0 Code Low Level Timemin 0.9 us; signal transmission definition
Input 1 Code Low Level Timemin 0.3 us; signal transmission definition
0/1 Code Cyclemin 1.2 us; signal transmission definition
Reset Low Level Time>200 us; signal transmission definition
Code Low Level Time Limit<20 us; 0 code and 1 code low-level time when programming
Room Temperature Life Test1000 h, 22 samples, 0 failures; Ta=25°C ±5°C, IF=12 mA, JIS7021:B4
High Temperature Storage Test1000 h, 22 samples, 0 failures; Ta=85°C ±5°C, JIS7021:B10, MIL-STD-202:210A, MIL-STD-750:2031
Low Temperature Storage Test1000 h, 22 samples, 0 failures; Ta=-35°C ±5°C, JIS7021:B12
High Temperature Humidity Test1000 h, 22 samples, 0 failures; Ta=85°C ±5°C, RH=85%, JIS7021:B11, MIL-STD-202:103D
Cold/Heat Strike Test100 cycles, 22 samples, 0 failures; -10°C ±5°C to 100°C ±5°C, 30 min/5 min/5 min timing, JIS7021:B4, MIL-STD-202:107D, MIL-STD-750:1026
Cold and Heat Cycle Test100 cycles, 22 samples, 0 failures; -35°C to 25°C to 85°C to -35°C, 30 min/5 min/30 min/5 min timing, JIS7021:A3, MIL-STD-202:107D, MIL-STD-705:105E
Reliability Judging Criterion Forward Voltagemax initial data x 1.1; IF=12 mA
Reliability Judging Criterion Reverse Currentmax 1 uA; VR=5 V
Reliability Judging Criterion Luminous Intensitymin initial data x 0.7; IF=12 mA
Dimensional Tolerance±0.1 mm; unless otherwise noted
Pin 1 FunctionDO, display data cascade output; pin function table
Pin 2 FunctionGND, signal ground and power ground; pin function table
Pin 3 FunctionDI, display data input; pin function table
Pin 4 FunctionVDD, internal IC power positive and RGB positive; pin function table
Carrier Tape Dimensional Tolerance±0.25 mm; belt and disk dimensions unless otherwise noted
Hand Soldering Iron Power<30 W; recommended for repair/rework only
Hand Soldering Temperature<300°C; each terminal once only
Hand Soldering Time<3 s; per terminal, one time only
Recommended Maximum Reflow Temperature240 ±5°C for 6 s; product recommended maximum welding temperature
Maximum Reflow Count2 times; secondary reflow interval within 8 h
Alcohol Cleaning Condition30°C for 3 min or 50°C for 30 s; after soldering
Ultrasonic Cleaning Powermax 300 W; pretest recommended
Unopened Shelf Life3 months; sealed moisture-proof anti-static bag with desiccant
Storage Before Opening≤30°C, ≤60% RH; before opening package
Storage After Opening≤30°C, <40% RH, use within 24 h; after opening package
Recommended Workshop Condition≤30°C, <60% RH; operation after package opening
Baking Condition60 ±5°C for 24 h; if desiccant/package failed or storage time exceeded
Signal Protection Resistor Range20 ohm to 2 kohm; series resistor at signal input/output depending on cascade count and transmission distance
Typical Signal Protection Resistorabout 500 ohm; recommended usual value for R1/R2
Datasheet Statusrequest_only

Product Overview

XL-0807RGBC-WS2812B is a XINGLIGHT addressable RGB LED built in an 0807 SMD package with 2.0 x 1.8 x 0.8 mm outline dimensions. The device provides RGB luminous color through a transparent colloid and integrates data input, cascade data output, power, and ground pins for serial LED designs.

The control interface is specified for 800 Kbps data transmission using a 24-bit data structure sent high-order bit first in GRB order. PWM output control provides 256 grayscale levels, with a 1.5 kHz output port scan frequency and 4.5 kHz typical output PWM frequency under the stated test condition. The part supports not less than 1024 points at a 30 frames/s refresh rate.

Electrical and optical parameters include 3.5-5.5 V chip power supply voltage, 12 mA/channel preset constant-current mode, typical RGB output current of 12 mA, and typical red, green, and blue intensities of 200 mcd, 800 mcd, and 300 mcd at Ta=25°C. Assembly data includes MSL 5 handling, recommended maximum reflow of 240 ±5°C for 6 s, and storage limits before and after package opening.

Key Features

  • 0807 SMD package measures 2.0 x 1.8 x 0.8 mm
  • RGB luminous color with transparent colloid construction
  • 800 Kbps serial data transmission characteristic
  • 24-bit data structure sent high-order bit first in GRB order
  • 256 grayscale levels through PWM output control
  • Supports not less than 1024 points at 30 frames/s
  • Preset constant-current mode provides 12 mA/channel
  • Typical output PWM frequency is 4.5 kHz
  • Operating temperature range is -40 to +85 °C
  • Four-pin interface includes DO, GND, DI, and VDD

Typical Applications

  • Addressable RGB pixel modules
  • Cascaded RGB LED indicators
  • Compact serial LED displays
  • Decorative RGB lighting nodes
  • Small-format display points
  • Programmable color lighting assemblies

Procurement Notes

When requesting a quote for XL-0807RGBC-WS2812B, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.

FAQ

What package is used for XL-0807RGBC-WS2812B?

XL-0807RGBC-WS2812B uses an 0807 SMD package with outline dimensions of 2.0 x 1.8 x 0.8 mm. The dimensional tolerance is ±0.1 mm unless otherwise noted in the datasheet.

What data format does this addressable RGB LED use?

The device uses a 24-bit data structure sent high-order bit first in GRB order. Its data transmission frequency is specified as 800 Kbps, and the reset low level time is greater than 200 us.

What supply voltage range is specified for the chip?

The electrical parameters specify a chip power supply voltage from a minimum of 3.5 V to a maximum of 5.5 V at Ta=25°C. Static current is typically 0.35 mA with VDD=5 V and IOUT off.

What are the typical RGB luminous intensities?

At Ta=25°C, the typical luminous intensities are 200 mcd for red, 800 mcd for green, and 300 mcd for blue. The typical half light angle is 120 degrees.

What assembly handling limits are listed?

The part is specified as MSL 5. Recommended maximum reflow temperature is 240 ±5°C for 6 s, with a maximum of two reflow cycles and a secondary reflow interval within 8 h.

Technical Review & Sourcing Note

Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.

This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.

Request Quote Request Datasheet