XL-2214SURC-A High Red SMD LED

Specifications

Product Overview

XL-2214SURC-A is a XINGLIGHT high red SMD LED built in a 2.2 x 1.4 x 1.35 mm surface-mount package. The device uses a transparent colloid construction and is specified for high red light output, with a dominant wavelength range of 615-630 nm and a typical peak wavelength of 625 nm at IF=20 mA and Ta=25°C.

Electrical and optical ratings include 900-1600 mcd luminous intensity, 1.9-2.3 V forward voltage, 1 uA maximum reverse current at VR=5 V, and a typical 120 degree viewing angle. Absolute ratings list 50 mW power dissipation, 20 mA forward current, 80 mA peak forward current under pulsed conditions, and 2000 V electrostatic discharge rating at Ta=25°C.

For assembly planning, the part is rated MSL 3. The datasheet specifies a recommended maximum reflow soldering temperature of 240±5°C for 6 s with two reflow cycles maximum, plus hand soldering below 300°C for less than 3 s per terminal. Storage guidance includes unopened storage at <=30°C and <60%RH for use within 1 year, and opened storage at <=30°C and <40%RH with soldering within 168 hours.

Key Features

• 2.2 x 1.4 x 1.35 mm SMD LED package
• High red light with transparent colloid construction
• 615-630 nm dominant wavelength at 20 mA
• 900-1600 mcd luminous intensity at 20 mA
• 1.9-2.3 V forward voltage at 20 mA
• 120 degree typical viewing angle at 20 mA
• MSL 3 moisture sensitivity level
• -40°C to +85°C operating temperature range
• 240±5°C reflow limit for 6 seconds
• Two maximum reflow soldering cycles

Typical Applications

• Compact red status indicators
• Surface-mount red signal lighting
• Panel indication LEDs
• Small display indicator points
• Red warning or state indicators
• Dense PCB indicator layouts

Procurement Notes

When requesting a quote for XL-2214SURC-A, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.