Specifications
| Type | Description |
|---|---|
| Part Number | XL-2214UYC |
| Manufacturer | XINGLIGHT |
| Product Type | yellow transparent SMD LED |
| Category | LED |
| Package / Case | SMD LED, 2.2 x 1.4 x 1.35 mm |
| Datasheet Part Number | XL-2214UYC |
| Outline Dimensions | 2.2 x 1.4 x 1.35 mm; L/W/H |
| Luminous Color | Yellow light; transparent colloid |
| RoHS Compliance | Complied with RoHS Directive |
| Moisture Sensitivity Level | MSL 3 |
| Power Dissipation | 50 mW; Ta=25°C |
| Peak Forward Current | 80 mA; 1/10 duty cycle, 0.1 ms pulse width, Ta=25°C |
| Forward Current | 20 mA; Ta=25°C |
| Electrostatic Discharge | 2000 V; Ta=25°C |
| Operating Temperature Range | -40°C to +85°C |
| Storage Temperature Range | -40°C to +85°C |
| Lead Soldering Temperature | 260°C max for <=6 s |
| Luminous Intensity | 300-600 mcd; IF=20 mA, Ta=25°C |
| Dominant Wavelength | 585-595 nm; IF=20 mA, Ta=25°C |
| Peak Wavelength | 590 nm typ; IF=20 mA, Ta=25°C |
| Viewing Angle | 120 deg typ; 2θ1/2, IF=20 mA, Ta=25°C |
| Forward Voltage | 1.9-2.3 V; IF=20 mA, Ta=25°C |
| Reverse Current | 1 μA max; VR=5 V, Ta=25°C |
| Brightness Grading | D9: 300-350 mcd; E1: 350-400 mcd; E2: 400-450 mcd; E3: 450-500 mcd; E4: 500-600 mcd; IF=20 mA |
| Voltage Grading | N11-4: 1.9-2.1 V; N11-5: 2.1-2.3 V; IF=20 mA |
| Dominant Wavelength Grading | HY03: 585-587.5 nm; HY04: 587.5-590 nm; HY05: 590-592.5 nm; HY06: 592.5-595 nm; IF=20 mA |
| Test Environment Temperature | 25±5°C; unless otherwise indicated |
| Room Temperature Life Test | 1000 hrs, 22 pcs, 0 failures; Ta=25±5°C, IF=20 mA |
| High Temperature Storage Test | 1000 hrs, 22 pcs, 0 failures; Ta=85±5°C |
| Low Temperature Storage Test | 1000 hrs, 22 pcs, 0 failures; Ta=-35±5°C |
| High Temperature Humidity Test | 1000 hrs, 22 pcs, 0 failures; Ta=85±5°C, RH=85% |
| Cold Heat Strike Test | 100 cycles, 22 pcs, 0 failures; -10±5°C to 100±5°C |
| Cold Heat Cycle Test | 100 cycles, 22 pcs, 0 failures; -35°C to 25°C to 85°C to -35°C |
| Outline Dimension Tolerance | ±0.25 mm; unless otherwise noted |
| Tape Dimension Tolerance | ±0.1 mm; belt and disk dimensions |
| Hand Soldering Iron Power | <30 W; hand soldering |
| Hand Soldering Temperature | <300°C; each terminal less than 3 s, one time only |
| Reflow Soldering Count | No more than two times |
| Recommended Maximum Reflow Temperature | 240±5°C for 6 s |
| Cleaning Condition | Under 30°C for 3 min or under 50°C for 30 s; alcohol solvent after soldering |
| Ultrasonic Cleaning Power | <=300 W; pretest required |
| Unopened Storage Condition | 30°C or less, humidity less than 60% RH, use within one year |
| Opened Storage Condition | 30°C or less, humidity less than 40% RH, solder within 168 hours (7 days) |
| Recommended Workshop Condition | 30°C or less, humidity less than 60% RH; operation after opening |
| Baking Condition | 60±5°C for 24 hours; if moisture absorbent has faded or storage time exceeded |
| Datasheet Status | request_only |
Product Overview
XL-2214UYC is a XINGLIGHT yellow transparent SMD LED. The referenced datasheet identifies the LED outline as 2.2 x 1.4 x 1.35 mm, with yellow light emitted through a transparent colloid package.
At IF=20 mA and Ta=25°C, the device is specified for 300-600 mcd luminous intensity, 585-595 nm dominant wavelength, 590 nm typical peak wavelength, and a 120 degree typical viewing angle. The forward voltage range is 1.9-2.3 V under the same test condition, with reverse current limited to 1 μA max at VR=5 V.
Assembly and handling data include MSL 3, RoHS compliance, no more than two reflow soldering cycles, and a recommended maximum reflow temperature of 240±5°C for 6 s. Storage guidance lists 30°C or less before opening, humidity below 60% RH, and soldering within 168 hours after opening when stored at 30°C or less and below 40% RH.
Key Features
- Yellow transparent SMD LED package
- 2.2 x 1.4 x 1.35 mm outline
- 300-600 mcd luminous intensity at 20 mA
- 585-595 nm dominant wavelength at 20 mA
- 590 nm typical peak wavelength
- 120 degree typical viewing angle
- 1.9-2.3 V forward voltage range
- 20 mA rated forward current
- -40°C to +85°C operating temperature
- MSL 3 moisture sensitivity rating
- RoHS Directive compliance listed
Typical Applications
- Yellow status indicators
- Compact surface-mount indicator boards
- Control panel indication
- Consumer device indication
- Instrument display backlighting
- Signal and warning indicators
- PCB-mounted visual indicators
Related Technical Articles
FAQ
What package size is specified for XL-2214UYCXL-2214UYC?
The datasheet lists the outline dimensions as 2.2 x 1.4 x 1.35 mm for the SMD LED package, with a general outline dimension tolerance of ±0.25 mm unless otherwise noted.
What are the main optical ratings at 20 mA?
At IF=20 mA and Ta=25°C, the LED is specified for 300-600 mcd luminous intensity, 585-595 nm dominant wavelength, 590 nm typical peak wavelength, and a 120 degree typical viewing angle.
What forward voltage range does the datasheet give?
The forward voltage range is 1.9-2.3 V at IF=20 mA and Ta=25°C. The datasheet also provides voltage grading of N11-4 for 1.9-2.1 V and N11-5 for 2.1-2.3 V.
What storage rule applies after opening the package?
After opening, the datasheet specifies storage at 30°C or less and humidity below 40% RH, with soldering completed within 168 hours, equivalent to 7 days.
What soldering limits are listed for this LED?
The datasheet states lead soldering temperature of 260°C max for <=6 s, no more than two reflow soldering cycles, and a recommended maximum reflow temperature of 240±5°C for 6 s.