Specifications
| Type | Description |
|---|---|
| Part Number | XL-2214UYC-A |
| Manufacturer | XINGLIGHT |
| Product Type | yellow SMD LED |
| Category | LED |
| Package / Case | 2.2 x 1.4 x 1.35 mm SMD LED |
| Outline Dimensions | 2.2 x 1.4 x 1.35 mm |
| Luminous Color | Yellow light |
| RoHS Compliance | Complied with RoHS Directive |
| Moisture Sensitivity Level | MSL 3 |
| Mounting / Production Compatibility | Suitable for SMT automatic production |
| Reflow Process Compatibility | Suitable for infrared reflow soldering process |
| Power Dissipation | 50 mW |
| Peak Forward Current | 80 mA |
| Forward Current | 20 mA |
| Electrostatic Discharge | 2000 V |
| Operating Temperature Range | -40°C to +85°C |
| Storage Temperature Range | -40°C to +85°C |
| Lead Soldering Temperature | 260°C, <=6 s |
| Luminous Intensity | 800-1000 mcd |
| Dominant Wavelength | 585-595 nm |
| Peak Wavelength | 592 nm typ |
| Viewing Angle | 120 deg typ |
| Forward Voltage | 1.7-2.3 V |
| Reverse Current | 1 μA max |
| Brightness Grading E8 | 800-900 mcd |
| Brightness Grading E9 | 900-1000 mcd |
| Voltage Grading N11-3 | 1.7-1.9 V |
| Voltage Grading N11-4 | 1.9-2.1 V |
| Voltage Grading N11-5 | 2.1-2.3 V |
| Wavelength Grading HY03 | 585-587.5 nm |
| Wavelength Grading HY04 | 587.5-590 nm |
| Wavelength Grading HY05 | 590-592.5 nm |
| Wavelength Grading HY06 | 592.5-595 nm |
| Test Environment Temperature | 25±5°C |
| Room Temperature Life Test | 1000 hours, Qty 22, Fail Qty 0 |
| High Temperature Storage Test | 1000 hours, Qty 22, Fail Qty 0 |
| Low Temperature Storage Test | 1000 hours, Qty 22, Fail Qty 0 |
| High Temperature / Humidity Test | 1000 hours, Qty 22, Fail Qty 0 |
| Cold / Heat Strike Test | 100 cycles, Qty 22, Fail Qty 0 |
| Cold and Heat Cycle Test | 100 cycles, Qty 22, Fail Qty 0 |
| Reliability Judging Criterion - Forward Voltage | Max initial data x 1.1 |
| Reliability Judging Criterion - Reverse Current | Max 1 μA |
| Reliability Judging Criterion - Luminous Intensity | Min initial data x 0.7 |
| Outline Dimension Tolerance | ±0.25 mm |
| Tape / Reel Dimension Tolerance | ±0.1 mm |
| Hand Soldering Iron Power | <30 W |
| Hand Soldering Temperature | <300°C |
| Reflow Soldering Cycles | not more than 2 times |
| Recommended Maximum Welding Temperature | 240±5°C for 6 s |
| Cleaning Condition With Alcohol | under 30°C for 3 minutes or 50°C for 30 seconds |
| Ultrasonic Cleaning Power | <=300 W |
| Unopened Storage Condition | <=30°C, <60% RH, use within 1 year |
| Opened Storage Condition | <=30°C, <40% RH, solder within 168 hours / 7 days |
| Recommended Workshop Condition | <=30°C, <60% RH |
| Baking Condition | 60±5°C for 24 hours |
| Datasheet Status | request_only |
Product Overview
XL-2214UYC-A is a XINGLIGHT yellow SMD LED built in a compact 2.2 x 1.4 x 1.35 mm outline. The datasheet identifies yellow light emission with transparent colloid and gives an outline dimension tolerance of ±0.25 mm unless otherwise noted.
At IF=20mA and Ta=25°C, the LED is specified for 800-1000 mcd luminous intensity, 585-595 nm dominant wavelength, 592 nm typical peak wavelength, 120 degree typical viewing angle, and 1.7-2.3 V forward voltage. Reverse current is specified at 1 μA maximum at VR=5V.
Assembly guidance supports SMT automatic production and infrared reflow soldering, with reflow limited to not more than two cycles. The product is RoHS compliant, rated MSL 3, and has storage and handling conditions defined for unopened, opened, workshop, and baking scenarios.
Key Features
- 2.2 x 1.4 x 1.35 mm SMD LED package
- Yellow light output with transparent colloid construction
- 800-1000 mcd luminous intensity at IF=20mA
- 585-595 nm dominant wavelength at IF=20mA
- 592 nm typical peak wavelength at IF=20mA
- 120 degree typical viewing angle at IF=20mA
- 1.7-2.3 V forward voltage at IF=20mA
- RoHS compliant environmental protection product
- MSL 3 moisture sensitivity rating
- Suitable for SMT automatic production
- Suitable for infrared reflow soldering
- -40°C to +85°C operating temperature range
Typical Applications
- Yellow status indicators
- Surface-mount LED assemblies
- SMT automatic production lines
- Infrared reflow soldered boards
- Compact indicator lighting
- Wide-angle visual indication
- RoHS compliant LED designs
- Moisture-controlled SMT assembly
Related Technical Articles
FAQ
What package size does XL-2214UYC-A use?
XL-2214UYC-A uses a 2.2 x 1.4 x 1.35 mm SMD LED package. The outline dimension tolerance is specified as ±0.25 mm unless otherwise noted in the datasheet.
What optical output is specified at IF=20mA?
At IF=20mA and Ta=25°C, the datasheet specifies 800-1000 mcd luminous intensity, 585-595 nm dominant wavelength, 592 nm typical peak wavelength, and a 120 degree typical viewing angle.
Is XL-2214UYC-A compatible with SMT assembly?
Yes. The extracted datasheet facts state that XL-2214UYC-A is suitable for SMT automatic production and suitable for infrared reflow soldering. Reflow soldering is limited to not more than two cycles.
What storage conditions apply after opening the package?
After opening the package, the datasheet specifies storage at <=30°C and <40% RH, with soldering within 168 hours or 7 days. Recommended workshop conditions are <=30°C and <60% RH.