Specifications
| Type | Description |
|---|---|
| Part Number | XL-3014SURC-02 |
| Manufacturer | XINGLIGHT |
| Product Type | Surface-mount red LED |
| Category | LED |
| Package/Case | 3014 SMD LED, 3.0 x 1.4 x 0.8 mm |
| Component Type | LED |
| Package Dimensions | 3.0 x 1.4 x 0.8 mm |
| Emitted Color | Red |
| Lens / Colloid Color | Transparent colloid |
| RoHS Compliance | Complied with RoHS Directive |
| Moisture Sensitivity Level | MSL 3 |
| Maximum Power Dissipation | 200 mW, Ta=25°C |
| Maximum Continuous Forward Current | 60 mA, Ta=25°C |
| Peak Forward Current | 120 mA, pulse width <=0.1 ms, duty <=1/10, Ta=25°C |
| Maximum Reverse Voltage | 5 V, Ta=25°C |
| ESD Rating | 2000 V, antistatic ability; test model not specified |
| Operating Temperature Range | -40 to +85°C |
| Storage Temperature Range | -40 to +85°C |
| Lead Soldering Temperature / Time | 260°C, <=6 s |
| Luminous Intensity | 550 to 900 mcd, IF=60 mA, Ta=25°C |
| Dominant Wavelength | 615 to 630 nm, IF=60 mA, Ta=25°C |
| Peak Wavelength | 625 nm typ., IF=60 mA, Ta=25°C |
| Forward Voltage | 1.8 to 2.4 V, IF=60 mA, Ta=25°C |
| Viewing Angle | 120° typ., 2θ1/2, IF=60 mA, Ta=25°C |
| Half Wave Width | 20 nm typ., IF=60 mA, Ta=25°C |
| Reverse Current | <=5 µA, VR=5 V, Ta=25°C |
| Brightness Bin E5 | 550 to 600 mcd, IF=60 mA |
| Brightness Bin E6 | 600 to 700 mcd, IF=60 mA |
| Brightness Bin E7 | 700 to 800 mcd, IF=60 mA |
| Brightness Bin E8 | 800 to 900 mcd, IF=60 mA |
| Forward Voltage Bin N12-7 | 1.8 to 2.0 V, IF=60 mA |
| Forward Voltage Bin N12-8 | 2.0 to 2.2 V, IF=60 mA |
| Forward Voltage Bin N12-9 | 2.2 to 2.4 V, IF=60 mA |
| Dominant Wavelength Bin HR01 | 615 to 620 nm, IF=60 mA |
| Dominant Wavelength Bin HR02 | 620 to 625 nm, IF=60 mA |
| Dominant Wavelength Bin HR03 | 625 to 630 nm, IF=60 mA |
| Test Ambient Temperature | 25 ±5°C unless otherwise indicated |
| Outline Dimension Tolerance | ±0.25 mm unless otherwise noted |
| Tape / Reel Dimension Tolerance | ±0.1 mm for belt and disk dimensions |
| Hand Soldering Iron Power | <30 W, recommended for repair/rework only |
| Hand Soldering Temperature | <300°C, each terminal once, less than 3 s |
| Maximum Reflow Cycles | 2 times |
| Recommended Maximum Welding Temperature | 240 ±15°C for 6 s |
| Lead-Free Reflow Peak Temperature | 255°C +0/-5°C, keep at peak for 5-10 s; ramp max 3°C/s, cooling max 6°C/s |
| Lead-Free Reflow Time Above 217°C | 60 to 120 s |
| Storage Before Opening | <=30°C, <60% RH, use within 1 year |
| Storage After Opening | <=30°C, <40% RH, solder within 168 hours / 7 days |
| Baking Condition | 60 ±5°C for 24 hours if desiccant/package fails or storage time exceeded |
| Datasheet Status | request_only |
Product Overview
Electrical operation is characterized at IF=60 mA and Ta=25°C, with a forward voltage range of 1.8 to 2.4 V, luminous intensity from 550 to 900 mcd, dominant wavelength from 615 to 630 nm, and 120° typical viewing angle. Absolute maximum ratings include 200 mW power dissipation, 60 mA continuous forward current, 120 mA peak forward current under the stated pulse condition, and 5 V maximum reverse voltage.
Assembly information includes MSL 3 moisture sensitivity, lead-free reflow peak temperature of 255°C +0/-5°C, and a maximum of two reflow cycles. Storage requirements are defined for sealed and opened packaging, with baking at 60 ±5°C for 24 hours if moisture-control limits are exceeded.
Key Features
- 3014 SMD LED package measures 3.0 x 1.4 x 0.8 mm
- Red emission with transparent colloid lens structure
- Luminous intensity range of 550 to 900 mcd at 60 mA
- Dominant wavelength specified from 615 to 630 nm
- Forward voltage range of 1.8 to 2.4 V at 60 mA
- 120° typical viewing angle for broad optical distribution
- MSL 3 moisture sensitivity with defined baking conditions
- Lead-free reflow peak temperature up to 255°C +0/-5°C
Typical Applications
- Red status indicators
- Surface-mount signal lights
- Compact LED indication layouts
- Panel indication points
- Red optical signal outputs
- SMT indicator assemblies
Procurement Notes
When requesting a quote for XL-3014SURC-02, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Alternatives
TOGIALED
TJ-S3014UG1W7TLC2R-A5
Cross-reference candidate from XINGLIGHT replacement table; validate package, optical/electrical parameters, binning and sourcing requirements before substitution.
Application Verification Recommended
Related Technical Articles
FAQ
What type of component is XL-3014SURC-02?
XL-3014SURC-02 is a XINGLIGHT surface-mount red LED in a 3014 SMD package measuring 3.0 x 1.4 x 0.8 mm with transparent colloid.
What are the main optical ratings for this LED?
At IF=60 mA and Ta=25°C, the LED is specified for 550 to 900 mcd luminous intensity, 615 to 630 nm dominant wavelength, 625 nm typical peak wavelength, and 120° typical viewing angle.
What forward voltage range is specified?
The forward voltage range is 1.8 to 2.4 V at IF=60 mA and Ta=25°C. The datasheet also defines N12-7, N12-8, and N12-9 voltage bins across that range.
What moisture and soldering limits apply?
The LED is rated MSL 3. After opening, storage is limited to <=30°C and <40% RH, with soldering within 168 hours. Lead-free reflow peak temperature is 255°C +0/-5°C.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.