Specifications
| Type | Description |
|---|---|
| Part Number | XL-3014UWC-02 |
| Manufacturer | XINGLIGHT |
| Product Type | White SMD LED |
| Category | LED |
| Package/Case | 3014 SMD LED, 3.0 x 1.4 x 0.8 mm |
| Package Dimensions | 3.0 x 1.4 x 0.8 mm |
| Package Tolerance | ±0.25 mm, unless otherwise noted |
| Emitted Color | White |
| Lens / Colloid Color | Yellow colloid |
| RoHS Compliance | Complies with RoHS Directive |
| Moisture Sensitivity Level | MSL 3 |
| Maximum Power Dissipation | 200 mW, Ta=25°C |
| Maximum Continuous Forward Current | 60 mA, Ta=25°C |
| Peak Forward Current | 120 mA, pulse width ≤0.1 ms, duty ≤1/10, Ta=25°C |
| Maximum Reverse Voltage | 5 V, Ta=25°C |
| ESD Rating | 2000 V, antistatic ability; test model not specified |
| Operating Temperature Range | -40 to +85°C |
| Storage Temperature Range | -40 to +85°C |
| Lead Soldering Temperature / Time | 260°C for ≤6 s, absolute maximum rating |
| Luminous Flux | 20-33 lm, IF=60 mA, Ta=25°C |
| Color Temperature | 4000-4500 K, IF=60 mA, Ta=25°C |
| Forward Voltage | 2.8-3.2 V, IF=60 mA, Ta=25°C |
| Viewing Angle | 120° typical, 2θ1/2, IF=60 mA, Ta=25°C |
| Reverse Current | 5 µA max, VR=5 V, Ta=25°C |
| Chromaticity Coordinate X | Not specified, IF=60 mA |
| Chromaticity Coordinate Y | Not specified, IF=60 mA |
| Brightness Bin J1 | 20-23 lm, IF=60 mA |
| Brightness Bin J2 | 23-27 lm, IF=60 mA |
| Brightness Bin J3 | 27-33 lm, IF=60 mA |
| Voltage Bin N13-3 | 2.8-3.0 V, IF=60 mA |
| Voltage Bin N13-4 | 3.0-3.2 V, IF=60 mA |
| Voltage Bin N13-5 | 3.2-3.4 V, IF=60 mA |
| Color Temperature Bin MW1-10 | 4000-4500 K, IF=60 mA |
| Default Test Ambient Temperature | 25±5°C, unless otherwise indicated |
| Working Life Test | 1000 hours; continuous lighting at maximum rated current at room temperature; tested at 20 mA |
| High Temperature and High Humidity Storage Test | 240 hours ±2 hours, Ta=85±5°C, RH=90-95%, IR reflow in-board 2 times |
| High Temperature Storage Test | 1000 hours, Ta=85±5°C |
| Low Temperature Storage Test | 1000 hours, Ta=-40±5°C |
| Cold and Hot Cycle Test | 50 cycles; 105°C 30 min, 25°C 5 min, -55°C 30 min, 25°C 5 min |
| Hot and Cold Impact Test | 50 cycles; IR reflow in-board 2 times; 100±5°C for 20 min to -40±5°C for 20 min |
| Anti-Tin Test | 260±5°C, 10±1 s, 2 times; soldering temperature T.sol |
| Lead Reflow Profile Peak Temperature | 235°C +5/-0°C; keep at peak for 10-15 s; ramp max 3°C/s; cooling max 6°C/s |
| Lead-Free Reflow Profile Peak Temperature | 255°C +0/-5°C; keep at peak for 5-10 s; ramp max 3°C/s; cooling max 6°C/s |
| Lead-Free Reflow Time Above 217°C | 60-120 s, lead-free infrared reflow welding |
| Lead Reflow Time Above 183°C | 60-150 s, lead infrared reflow welding |
| Weldability Test | 235±5°C, immersion time 2±0.5 s; immersion speed 25±2.5 mm/s, tin loading rate ≥95% pad area |
| Hand Soldering Iron Power | <30 W, recommended only for repair/rework |
| Hand Soldering Temperature | <300°C, less than 3 s per terminal, one time only |
| Maximum Reflow Count | 2 times, reflow soldering |
| Recommended Maximum Welding Temperature | 240±5°C for 6 s, product recommendation |
| Cleaning Condition | Alcohol cleaning under 30°C for 3 min or under 50°C for 30 s after soldering |
| Ultrasonic Cleaning Power | ≤300 W, pretest recommended |
| Unopened Storage Condition | ≤30°C, ≤60% RH, use within 1 year before opening moisture-proof anti-static package |
| Opened Storage Condition | ≤30°C, ≤40% RH, solder within 168 hours / 7 days after opening package |
| Baking Condition | 60±5°C for 24 hours if desiccant has faded or storage time exceeded |
| Recommended Drive Method | Current-regulated circuit with protective resistor; current through each LED must not exceed absolute maximum rating |
| Peak Wavelength | Not specified |
| Dominant Wavelength | Not specified |
| Datasheet Status | request_only |
Product Overview
XL-3014UWC-02 from XINGLIGHT is a white surface-mount LED designed in a compact 3014 SMD LED package. The package outline is 3.0 x 1.4 x 0.8 mm with a general package tolerance of ±0.25 mm unless otherwise noted, and the device uses yellow colloid with white emitted color.
At IF=60 mA and Ta=25°C, the LED is specified for 20-33 lm luminous flux, 4000-4500 K color temperature, 2.8-3.2 V forward voltage, and a 120° typical viewing angle. Absolute maximum ratings include 200 mW power dissipation, 60 mA continuous forward current, 120 mA peak forward current under the stated pulse condition, and 5 V maximum reverse voltage.
Assembly data includes MSL 3 moisture sensitivity, a maximum of two reflow cycles, lead-free reflow peak temperature of 255°C +0/-5°C, and opened-package soldering within 168 hours at ≤30°C and ≤40% RH. The datasheet recommends a current-regulated drive circuit with a protective resistor.
Key Features
- White surface-mount LED in compact 3014 SMD package
- 3.0 x 1.4 x 0.8 mm package outline
- 20-33 lm luminous flux at IF=60 mA
- 4000-4500 K color temperature bin MW1-10
- 2.8-3.2 V forward voltage at IF=60 mA
- 120° typical viewing angle for broad emission
- 60 mA maximum continuous forward current rating
- MSL 3 moisture sensitivity handling requirement
- RoHS Directive compliant environmental process
- Supports SMT automatic production assembly flow
Typical Applications
- SMT automatic production assemblies
- White indicator lighting
- Compact electronic component illumination
- Current-regulated LED circuits
- Reflow-soldered LED boards
- Repair or rework with hand soldering
- Applications requiring 4000-4500 K white output
Procurement Notes
When requesting a quote for XL-3014UWC-02, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Alternatives
TCWIN
LC-T01-WB-W02G
Cross-reference candidate from XINGLIGHT replacement table; validate package, optical/electrical parameters, binning and sourcing requirements before substitution.
Application Verification Recommended
Related Technical Articles
FAQ
What type of component is XL-3014UWC-02?
XL-3014UWC-02 is a XINGLIGHT white surface-mount LED in a 3014 SMD package. The package outline is specified as 3.0 x 1.4 x 0.8 mm with yellow colloid and white emitted color.
What are the main electrical ratings for this LED?
At Ta=25°C, the device has 200 mW maximum power dissipation, 60 mA maximum continuous forward current, 120 mA peak forward current under the stated pulse condition, and 5 V maximum reverse voltage.
What optical output is specified at IF=60 mA?
At IF=60 mA and Ta=25°C, the datasheet specifies 20-33 lm luminous flux, 4000-4500 K color temperature, 2.8-3.2 V forward voltage, and a 120° typical viewing angle.
How should opened packages be stored before soldering?
After opening the moisture-proof anti-static package, storage is specified at ≤30°C and ≤40% RH. The parts should be soldered within 168 hours, or 7 days, according to the extracted datasheet handling condition.
What drive method is recommended for XL-3014UWC-02?
The datasheet recommends a current-regulated circuit with a protective resistor. Current through each LED must not exceed the absolute maximum rating, including the 60 mA maximum continuous forward current condition.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.