Specifications
| Type | Description |
|---|---|
| Part Number | XL-IRM0038T |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | Epoxy resin plastic encapsulated semi-circular spherical package; 5.5 x 5.0 x 4.9 mm body, 22.5 mm lead length |
| Supply Voltage Absolute Maximum | 6.0 V; Ta=25°C |
| Operating Ambient Temperature | -20°C to +85°C; absolute maximum rating, Ta=25°C |
| Storage Ambient Temperature | -40°C to +125°C; absolute maximum rating, Ta=25°C |
| Wave Soldering Condition | 260°C, <=6 s; welding condition |
| Manual Welding Condition | 300°C, 3 s; welding condition |
| Working Current | min 0.2 mA, typ 0.3 mA, max 0.5 mA; VDD=5 V, Ta=25°C |
| Receive Distance at 0 Degrees | min 10 m, typ 12 m; Ta=25°C |
| Receive Distance at Left 35 Degrees | min 5 m, typ 6 m; Ta=25°C |
| Receive Distance at Right 35 Degrees | min 5 m, typ 6 m; Ta=25°C |
| Carrier Frequency | typ 37.9 kHz; Ta=25°C |
| BPF Width | typ 6 kHz; Ta=25°C |
| Low Level Output Voltage | max 250 mV; Isink=2.0 mA, Ta=25°C |
| High Level Output Voltage | min 4.5 V, max 5.0 V; VCC=5 V, Ta=25°C |
| Output Pulse Width Low | min 400 us, typ 600 us, max 800 us; burst wave, Vin=500 uVp-p |
| Output Pulse Width High | min 400 us, typ 640 us, max 800 us; burst wave, Vin=50 mVp-p |
| Minimum Pulse Width | min 350 us; Vin=50 mVp-p |
| Minimum Interval | min 450 us; Vin=50 mVp-p |
| Encoding Pause Time | min 45 us; Vin=50 mVp-p |
| Recommended Supply Voltage | 2.7 V to 5.5 V; recommended usage condition |
| Recommended Input Frequency | typ 37.9 kHz; recommended usage condition |
| Recommended Operating Temperature | typ 25°C; recommended usage condition |
| Receive Distance Grade L1 | 6 m to 8 m; ICC=0.5 mA |
| Receive Distance Grade L2 | 10 m to 15 m; ICC=0.5 mA |
| Receive Distance Grade L3 | 15 m to 20 m; ICC=0.5 mA |
| Working Voltage Grade V1 | 2.5 V to 5.5 V; ICC=0.5 mA |
| Working Voltage Grade V2 | 2.7 V to 5.5 V; ICC=0.5 mA |
| Working Current Grade I1 | 0.3 mA to 0.5 mA; VDD=5 V |
| Working Current Grade I2 | 0.4 mA to 0.7 mA; VDD=5 V |
| Output Logic Compatibility | TTL and CMOS compatible, active low output; product characteristic |
| Lead Bend Distance From Body | >=2 mm from colloid/body; pin forming precaution |
| Datasheet Status | request_only |
Product Overview
XL-IRM0038T is a XINGLIGHT infrared remote receiver module listed in the LED category. The device uses an epoxy resin plastic encapsulated semi-circular spherical package with a 5.5 x 5.0 x 4.9 mm body and 22.5 mm lead length, supporting through-hole assembly formats where the specified lead geometry is suitable.
Electrical operation is centered on infrared remote reception at a typ 37.9 kHz carrier frequency, with typ 6 kHz BPF width. Recommended supply voltage is 2.7 V to 5.5 V, while the absolute maximum supply voltage is 6.0 V at Ta=25°C. Output logic is TTL and CMOS compatible with an active-low output.
At VDD=5 V and Ta=25°C, working current is specified as min 0.2 mA, typ 0.3 mA, max 0.5 mA. Receive distance is min 10 m and typ 12 m at 0 degrees, and min 5 m and typ 6 m at left or right 35 degrees. Assembly constraints include 260°C for up to 6 s wave soldering, 300°C for 3 s manual welding, and lead bending at least 2 mm from the body.
Key Features
- Infrared remote receiver module for 37.9 kHz carrier signals
- Recommended 2.7 V to 5.5 V supply range
- TTL and CMOS compatible active-low output
- Typical 0.3 mA working current at 5 V
- Typical 12 m receive distance at 0 degrees
- Typical 6 m receive distance at +/-35 degrees
- 6 kHz typical band-pass filter width
- Low output voltage rated max 250 mV
- Wave soldering condition: 260°C for <=6 s
- Lead bending distance >=2 mm from body
Typical Applications
- Infrared remote control receivers
- Consumer electronics remote input
- TTL logic infrared signal interfaces
- CMOS logic infrared signal interfaces
- 37.9 kHz IR command reception
- Panel-mounted IR receiver inputs
Procurement Notes
When requesting a quote for XL-IRM0038T, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
FAQ
What supply voltage is recommended for XL-IRM0038T?
The recommended supply voltage for XL-IRM0038T is 2.7 V to 5.5 V. The absolute maximum supply voltage is 6.0 V at Ta=25°C, so designs should use the recommended range for normal operation.
What carrier frequency does XL-IRM0038T receive?
XL-IRM0038T is specified with a typical carrier frequency of 37.9 kHz at Ta=25°C. The recommended input frequency is also typ 37.9 kHz, with a typical BPF width of 6 kHz.
What output logic does XL-IRM0038T provide?
The module provides TTL and CMOS compatible output with active-low logic. Its low level output voltage is specified up to 250 mV at Isink=2.0 mA, and high level output voltage is 4.5 V to 5.0 V with VCC=5 V.
What receive distance is specified for XL-IRM0038T?
At Ta=25°C, receive distance at 0 degrees is min 10 m and typ 12 m. At left 35 degrees and right 35 degrees, the receive distance is min 5 m and typ 6 m.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.